Based on the introduction of opposed-piston two-stroke (OP2S) gasoline direct injection (GDI) engines, the OP2S-GDI engine working principle and scavenging process were analyzed. GT-Power software was employed to model the working process based on the structural style and principle of OP2S-GDI engine. The tracer gas method and OP2S-GDI engine experiment were employed for model validation at full load of 6000 rpm. The OP2S-GDI engine scavenging system parameters were optimized, including intake port height stroke ratio, intake port circumference ratio, exhaust port height stroke ratio, exhaust port circumference ratio, and opposed-piston motion phase difference. At the same time, the effect of the port height stroke ratio and opposed-piston motion phase difference on effective compression ratio and expansion ratio were considered, and the indicated work was employed as the optimization objective. A three-level orthogonal experiment was applied in the calculation process to reduce the calculation work. The influence and correlation coefficient on the scavenging efficiency and delivery ratio were investigated by the orthogonal experiment analysis of intake and exhaust port height stroke ratio and circular utilization. The effect of the scavenging system parameters on delivery ratio, scavenging efficiency and indicated work were calculated to obtain the best parameters. The results show that intake port height stroke ratio is the main factor for the delivery ratio, while exhaust port height stroke ratio is the main factor to engine delivery ratio and scavenging efficiency.

Zero carbon emissions will dominate the future of internal combustion engines (ICEs). Existing technology has pushed the performance of ICEs operating on traditional working principles to almost reach their limit. The new generation of ICEs needs to explore new efficient combustion modes. For new combustion modes to simplify the emission after treatment, the opposed-piston, two-stroke (OP2S) diesel engine is a powertrain with great potential value. Combined with dual-fuel technology, the OP2S diesel engine can effectively reduce carbon emissions to achieve clean combustion. Hence, methanol/diesel dual fuel was burnt in the OP2S engine to create a clean combustion mode for future demands. In the present work, a 1D simulation model of an OP2S diesel engine was established and verified. We investigated the influence of port height to stroke ratio (HSR) on power and emission performances of the OP2S diesel engine under different methanol ratios. The results show that the methanol ratio extremely influences the indicated power (IP) with the HSR of intake ports increasing. The IP decreases by about 1.8–2.0% for every 5% increase in methanol. Correspondingly, the methanol ratio extremely influences the indicated thermal efficiency (ITE), with the HSR of exhaust ports increasing. The ITE increases by about 2.1–3.1% for every 5% increase in methanol. The increasing methanol ratio reduces the HSR of ports for the optimal IP and ITE. To balance power performance and emission performance, the methanol ratio should be kept to 10–15%.