A theoretical model of avian flight is developed which simulates wing motion through a class of methods known as predictive simulation. This approach uses numerical optimization to predict power-optimal kinematics of avian wings in hover, cruise, climb and descent. The wing dynamics capture both aerodynamic and inertial loads. The model is used to simulate the flight of the pigeon,Columba livia, and the results are compared with previous experimental measurements. In cruise, the model unearths a vast range of kinematic modes that are capable of generating the required forces for flight. The most efficient mode uses a near-vertical stroke–plane and a flexed-wing upstroke, similar to kinematics recorded experimentally. In hover, the model predicts that the power-optimal mode uses an extended-wing upstroke, similar to hummingbirds. In flexing their wings, pigeons are predicted to consume 20% more power than if they kept their wings full extended, implying that the typical kinematics used by pigeons in hover are suboptimal. Predictions of climbing flight suggest that the most energy-efficient way to reach a given altitude is to climb as steeply as possible, subjected to the availability of power.
Jumping take-off in birds is an explosive behaviour with the goal of providing a rapid transition from ground to airborne locomotion. An effective jump is predicated on the need to maintain dynamic stability through the acceleration phase. The present study concerns understanding how birds retain control of body attitude and trajectory during take-off. Cursory observation suggests that stability is achieved with relatively little cost. However, analysis of the problem shows that the stability margins during jumping are actually very small and that stability considerations play a significant role in the selection of appropriate jumping kinematics. We use theoretical models to understand stability in prehensile take-off (from a perch) and also in non-prehensile take-off (from the ground). The primary instability is tipping, defined as rotation of the centre of gravity about the ground contact point. Tipping occurs when the centre of pressure falls outside the functional foot. A contribution of the paper is the development of graphical tipping stability margins for both centre of gravity location and acceleration angle. We show that the nose-up angular acceleration extends stability bounds forward and is hence helpful in achieving shallow take-offs. The stability margins are used to interrogate simulated take-offs of real birds using published experimental kinematic data from a guinea fowl (ground take-off) and a diamond dove (perch take-off). For the guinea fowl, the initial part of the jump is stable; however, simulations exhibit a stuttering instability not observed experimentally that is probably due to the absence of compliance in the idealized joints. The diamond dove model confirms that the foot provides an active torque reaction during take-off, extending the range of stable jump angles by around 45°.
A free-wake method is used to simulate the wake from retractable, jointed wings. The method serves to complement existing experimental studies that visualise flying animal wakes. Simulated wakes are shown to be numerically convergent for a case study of the Rock Pigeon in minimum power cruising flight. The free-wake model is robust in simulating wakes for a range of wing geometries and dynamics without requiring changes to the numerical method. The method is found to be useful for providing low order predictions of wake geometries. However, it is not well suited to reconstructing 3d flowfields as solutions are sensitive to the numerical mesh node locations.
In modelling turbulent flow around buildings, the computational domain needs to be much larger than the immediate neighbourhood of the building, resulting in computational costs that are excessive for many engineering applications. Two nested models are presented to solve this problem, with an outer domain calculated using a Reynolds Averaged Navier Stokes (RANS) solver in both cases. The inner region is calculated using large eddy simulation (LES) from both a lattice Boltzmann (LB) and a Navier Stokes (NS) based solver. The inner domains use the mean RANS velocity as boundary conditions for the top and the side boundaries and incorporate the RANS turbulence using a synthetic eddy method (SEM) at the inner domain inlet. Both models are tested using an atmospheric boundary layer flow around a rectangular building at = 47,893, comparing the computational resources spent and validating the results with experimental measurements. The effect of the inlet turbulence, the size of the domain and the cell size are also investigated. Both LB and NS based simulations are able to capture the physics of the flow correctly and show good agreement with the experimental results. Both simulation frameworks were configured to run in a similar computational time, so as to compare the computational resources used. Due to the use of GPU programming, the approach based on LB was estimated to be 25 times cheaper than the NS simulation. Thus these results show that a nested LB-LES solver can run accurate wind flow calculations with consumer level/cloud based computational resources.
Robots have been critical instruments to exploration of extreme environments by providing access to environments beyond human limitations. Jumping robot concepts are attractive solutions to negotiate complex and cluttered terrain. However, among the engineering challenges that need to be addressed to enable sustained operation of jumping robot concepts in extreme environments, the reduction of mechanical failure modes is one of the most fundamental. This study sets out to develop a jumping robot design, with a focus on a minimal actuation to support reduced mechanism maintenance and thus limit the number of mechanical failure modes. We present the synthesis of a Sarrus-style linkage to constrain the system to a single translational degree of freedom thus removing the need for synchronising gears, which exhibit high failure rates in dusty environments. We have restricted the present research to vertical solid jumps to assess the performance of the fundamental main-drive linkage. A laboratory demonstrator assists the transfer of theoretical concepts and approaches to practical implementation. The laboratory demonstrator performs jumps with 63% potential-to-kinetic energy conversion efficiency, with a theoretical maximum of 73%. Satisfactory operation opens up design optimisation and directional jump capability towards the development of a jumping robotic platform for extreme environments exploration.