Low operating voltages, rapid response, and high-throughput fabrication compatibility are key advantages for the development of electrolyte-gated field effect transistors (EGFETs) for biological sensing. Among the key components in EGFET biosensors, electrolyte materials are relatively less investigated, especially alternatives to water-based liquid electrolytes such as ionic liquids, ion gels, polyelectrolytes, and solid polymer electrolytes. These electrolytes enable portable devices and environmental stability superior to their water-based liquid alternatives. In this review, we offer an up-to-date evaluation of the state of EGFET research and gauge the strengths and limitations of high-performance electrolytes for use in EGFET biosensor applications as well as the potential for computer-aided design of such sensing platforms. The recent progress of EGFET biosensors for some popular analytes are reviewed and the performance of these alternative electrolytes in transistor biosensing is assessed. The challenges and opportunities for electrolytes in EGFETs are discussed for future research directions in this field.
The authors have demonstrated that the increase of electron injection barrier height between tris(8-hydroxyquinoline)aluminum (Alq3) and LiF∕Al cathode is one of the most critical parameters to determine the reliability of organic light-emitting diode with the typical structure of indium tin oxide/N,N′-bis(naphthalen-1-yl)-N,N′-bis(phenyl) benzidine/Alq3∕LiF∕Al. The electrical properties of several devices (hole only, electron only, and integrated double-layered devices) have been measured in the function of operating time to analyze the bulk and interface property changes. Bulk properties of trap energy and mobility in an organic layer have been estimated by using trap-charge-limited currents and transient electroluminescence measurements.
Backbone engineering was performed on highly rigid semiconducting polymers to include diketopyrropyrrole (DPP) units combined with pyrazine-containing moieties. These new moieties were shown to improve backbone planarity through a conformational locking effect between nitrogen and sulfur atoms. The new polymers, characterized by various techniques, were shown to possess a highly crystalline and smooth solid-state morphology, optimal for charge transport. To verify the potential of the new semiconductor for organic electronics, a series of organic field-effect transistors was fabricated. Interestingly, the new polymer was shown to possess a charge mobility of 0.27 cm2 V−1 s−1 and on/off current ratio of 107, which is an improvement when compared to a thiophene analogue. More importantly, the polymer led to devices with high stability, with a retention of device characteristics when exposed to the same bias stress comparable to a benchmark reference polymer. The utilization of pyrazine-containing moieties as a conformational lock is a promising strategy to achieve a high performance conjugated polymer in a simple manner. Moreover, their utilization in bottom-gate bottom-contact devices highlights the potential of this new semiconductor for fully printed high-performance electronics.