Wang Wenzhi

Dr. Wang Wenzhi


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 June 2022 in Materials
Verified
Journal Article
Open access
PDF file
SHShoujia Huang
Shoujia Huang
WWWang Wenzhi
Wang Wenzhi
HJHong Jiang
Hong Jiang
HZHuifeng Zhao
Huifeng Zhao
YMYanping Ma
Yanping Ma
Based on lithium aluminosilicate glass, the composition of glass was optimized by replacing SiO2 with B2O3, and the influence of glass composition on structure and performance was studied. With the increase in B2O3 concentrations from 0 to 6.5 mol%, Al2O3 always existed in the form of four-coordinated [AlO4] in the network structure, and B2O3 mainly entered the network in the form of four-coordinated [BO4]. The content of Si-O-Si linkages (Q4(0Al)) was always dominant. The incorporation of boron oxide improved the overall degree of polymerization and connectivity of the lithium aluminosilicate glass network structure. An increase in the degree of network polymerization led to a decrease in the thermal expansion coefficient of the glass and an increase in Vickers hardness and density. The durability of the glass in hydrofluoric acid and NaOH and KOH solutions was enhanced overall.

16 February 2023 in Materials
Verified
Journal Article
Open access
PDF file
JDJiaqi Duan
Jiaqi Duan
MLMinghan Li
Minghan Li
WWWang Wenzhi
Wang Wenzhi
ZHZiming Huang
Ziming Huang
HJHong Jiang
Hong Jiang
YMYanping Ma
Yanping Ma
Si-B-C-N/diamond-like carbon (DLC) gradient films with different layers were prepared on a glass substrate by radio frequency magnetron sputtering, and the structure and surface morphology of the resulting films were analyzed by scanning electron microscopy, Raman spectrometry, and X-ray photoelectron spectroscopy. The mechanical and optical properties of the films were studied using a multifunctional material mechanical testing system, UV-Vis spectrophotometer, and micro-Vickers hardness tester. The gradient structure promotes the formation of sp3 bonds and improves the hardness and optical transmittance of the resulting films. Among the prepared films, the single-layer Si-B-C-N/DLC gradient film shows the highest optical transmittance (97%). Film–substrate adherence is strengthened by the introduction of the gradient structure. The best adhesion was obtained with a double-layer Si-B-C-N/DLC gradient film. Suitable anti-wear properties were exhibited in both dry (0.18) and wet (0.07) conditions. In this paper, evaluation of the microstructural, optical, and mechanical properties of the films could provide new insights into improvements in the bonding force of glass-based DLC films and enrich the experimental data of DLC multilayer film systems.

29 November 2023 in Crystals
Verified
Journal Article
Open access
PDF file
MLMinghan Li
Minghan Li
LKLingqi Kong
Lingqi Kong
WWWang Wenzhi
Wang Wenzhi
YMYanping Ma
Yanping Ma
HJHong Jiang
Hong Jiang
The advent of 5G technology presented new challenges regarding the high-frequency characteristics of electrical signals and their impact on the cover glass properties of electronic devices. This study aimed to analyze the effect of the Li/Na molar ratio on the dielectric and mechanical properties, as well as the structural characteristics, of lithium aluminosilicate glass-ceramics. Using the melting method, we prepared lithium aluminosilicate base glasses and subsequently crystallized them by adjusting the molar ratio. XRD and TEM analyses were employed to investigate the resultant structures and crystal formation in the five base glasses. It was observed that Li2Si2O5 and LiAlSi4O10 crystals precipitated, exhibiting varying degrees of crystallinity and crystal ratios. Through a comparison of dielectric properties before and after crystallization, it was found that the dielectric constants of the glass-ceramics were consistently reduced. This decrease can be attributed to the lower dielectric constants exhibited by both crystalline phases compared to the parent lithium aluminosilicate glasses. Furthermore, the presence of glass crystals effectively immobilized the alkali metal ions within the glass phase, impeding their movement under an electric field. Consequently, the dielectric loss value of the glass-ceramics decreased with the increasing amount of precipitated crystals. By carefully adjusting the composition and optimizing the crystallization process, we successfully produced lithium aluminosilicate glass-ceramics, demonstrating excellent mechanical and optical properties, coupled with low dielectric properties.