Reduced chemical kinetic mechanisms are essential for enabling the use of complex fuels in 3D CFD combustion simulations. This study presents the development and optimization of a compact mechanism capable of accurately modeling ethanol–gasoline blends, including Brazilian Type-C gasoline (27% ethanol by volume) and up to pure ethanol (E100). An initial mechanism was constructed using the Directed Relation Graph with Error Propagation (DRGEP) method applied to detailed mechanisms selected for each surrogate component. The resulting mechanism was then refined through three global iterations of a genetic algorithm targeting ignition delay time (IDT) and laminar flame speed (LFS) performance. Five candidate versions (Mec1 to Mec5), each containing 179 species and 771 reactions, were generated. Mec4 was identified as the optimal configuration based on quantitative error analysis across all tested conditions and blend ratios. The final mechanism offers a balance between predictive accuracy and computational feasibility, making it well-suited for high-fidelity simulations in complex geometries involving multi-component ethanol–gasoline fuels.
The management of the global energy resources has stimulated the emergence of various agreements in favor of the environment. Among the most famous are the Conference of Parties (COP) and Route 2030, which aim to limit global warming to 1.5 °C by reducing the energy consumption and global emission levels. In order to comply with the international standards for energy consumption and pollutant emissions, the Brazilian government has been promoting the expansion of biofuels in the national energy matrix. Considering this scenario, the development of a novel internal combustion engine for the exclusive use of ethanol as a fuel, equipped with state-of-the-art technologies and employing modern design concepts, consists of an innovative and promising pathway for future Brazilian mobility, from both environmental and technological outlooks. In this sense, this work presents a method to determine the main engine dimensions as part of the initial process for a new ethanol prototype engine development. The Brazilian biofuel was selected due to its physicochemical properties, which allow the engine to achieve higher loads, and also due to its large availability as a renewable energy source in the country. Furthermore, a port water injection system was fitted to the engine in order to assist the combustion process by mitigating the knock tendency. The predicted overall engine performance was obtained by carrying out a GT-PowerTM 1D-CFD simulation, whose results pointed to a maximum torque of 279 Nm from 2000 to 4000 rpm and an indicated peak power of 135 kW at 5500 rpm. With a maximum water-to-fuel ratio of 19.2%, the engine was able to perform its entire full load curve at the MBT condition, a fact that makes the WI approach along with the ethanol fuel a very attractive solution. As a result of the specific design and optimization of each geometric parameter for this unique ethanol engine, a maximum indicated fuel conversion efficiency of 45.3% was achieved. Moreover, the engine was capable of achieving over 40% of the indicated fuel conversion efficiency in almost its entire full load curve.
30 September 2014 in SAE International Journal of Advances and Current Practices in Mobility
The growing demand of automotive market for innovative technologies of internal combustion engines lead to the development of engines that operate with alternative fuels, such as ethanol. New technologies involve the use of elements as turbochargers that increase the air density and provide increased power density, and enables the use downsizing techniques, which consists of engine with low volumetric displacement that provides lower mechanical friction and pumping losses producing higher brake efficiency and recovering its by means of turbocharging. The time-consumed and the associated technology development costs are major issues for the innovation in this sector. In this way, the CFD (Computational Fluid Dynamics) 1D and 3D are relevant means to shorter time and costs.This paper uses these technologies to simulate boosted SI engine behavior. The computational simulation is able to provide satisfactory results of performance from engines. To validate the model, experimental performance results such as Brake Mean Effective Pressure, Brake Specific Fuel Consumption and combustion parameters from experimental data carried out by Baeta [2] was used. The comparison obtained between experimental data and numerical simulation revealed that proposed model is able to reproduce the engine experimental results satisfactorily.
In the next 15 years, the Brazilian government faces the difficult task of honoring the environmental commitment assumed at COP21 to reduce in 43% the GHG emission contributing to the global warming effect. It also has the challenge of ensuring a sustainable fuel supply for the transport sector. In this scenario, the RenovaBio program gives the directives to promote the use of biofuels as an important source of energy. Besides the above-mentioned strategic aspects, the automotive market demands for the development of future technologies to improve the efficiency of the S.I. engines. With that in mind, the experimental work here described consisted of investigating the influence of the volumetric compression ratio, associated to internal EGR and airflow structure optimization (swirl and tumble) on the fuel consumption of a single cylinder research engine equipped with PFI and DI injection systems and running on E22 or hydrated ethanol. The conclusion of the present work will show that it is possible to improve the fuel conversion efficiency by increasing the volumetric compression ratios above the ones used in the passenger cars sold in Brazil, and that ethanol has many advantages over the fossil fuel due to its antiknocking properties and environment friendliness.
11 November 2023 in Journal of the Brazilian Society of Mechanical Sciences and Engineering