This paper studies an M/G/1 retrial queue with two types of breakdowns. When the server is idle, it is subject to breakdowns according to a Poisson process with rate δ and it cannot be repaired immediately. While when the server is busy, it may break down according to a Poisson process with rate θ and can be immediately repaired. Firstly, based on embedded Markov chain technique and probability generating function (PGF) method, we present the necessary and sufficient condition for the system to be stable and the PGF of the orbit size at the departure epochs. Secondly, we give the steady-state joint queue length distribution by supplementary variable method, and present some important performance measures and reliability indices. Thirdly, we provide the analysis of sojourn time of an arbitrary customer in the system when the system is in stable state. Finally, some numerical examples are presented to illustrate the effect of the some system parameters on important performance measures and reliability indices.
Through-silicon-via (TSV) approach has been widely investigated recently for three-dimensional (3D) electronic packaging integration. TSV wafer warpage is one of the most challenges for successfully subsequent processes. In this work, wafer level warpage modeling methodology has been developed by finite element analysis (FEA) method using equivalent material model. The developed modeling methodology has been verified by numerical results and experiment data. With using the developed model, wafer warpage has been simulated and analyzed by considering different factors such as annealing temperature, Cu overburden thickness, TSV depth and diameter. Simulation results show that wafer warpage increases with increasing annealing temperature and increasing Cu overburden thickness. Such findings have been successfully used in the TSV process optimization to reduce wafer warpage after annealing process. Submodeling methodology has also been developed to determine wafer stress accurately. Wafer bending stress is larger at wafer surface and close to the TSV edge. Bending stress is higher at the edge of TSV with finer pitch.
Face-to-face stacking of wafer-on-wafer is successfully demonstrated on 200-mm wafers using bumpless Cu-Cu bonding. The Cu bonding structures are fabricated using a damascene metallization process and recessed prior to bonding. The Cu surface topology is optimized and carefully cleaned prior to bonding. Bonded Cu structures are found to provide sufficient mechanical strength to sustain shear force during wafer thinning. Cu-Cu ohmic contact is formed as confirmed from the crossbar Kelvin structure, and its contact resistance is found to be sensitive to the time lapse between cleaning and bonding. The measured contact resistance is attributed to imperfections such as voids and oxide precipitates at the bonding interface.
9 May 2021 in Communications in Statistics - Theory and Methods
This article deals with availability and reliability characteristics for a repairable fault-tolerant system with warm standbys and second optional repair service. The failure times of primary components and warm standby ones are assumed to be exponentially distributed, and the failed components can be repaired by a repairman. For each failed component, the repairman provides two phases of repair service. All the failed components need the first essential repair, whereas only part of them demand the second optional repair. By using Markov theory and solving Matrix equation satisfied by the steady-state probabilities of the system, we present the steady-state availability of the system. By using Laplace transform method, we obtain the reliability function and the mean time to first failure of the system. Numerical examples are given to make research of the effect of the system parameters on the reliability function, steady-state availability and MTTF.