Large irradiation surface solar simulator often has the problem of low irradiation uniformity. Therefore, a method for designing a large irradiation surface solar simulator with high irradiation uniformity is proposed. According to the law of conservation of energy and the edge-ray principle of non-imaging optics, the free-form surface concentrator is designed and optimized by using the simulated annealing algorithm based on Bessel curve to improve the incident beam uniformity of the integrator. The optical integrator and projection system are also designed and optimized to eliminate aberrations, improve light efficiency, and enlarge the irradiation area. The design is verified using LightTools software and achieves an effective irradiation size of Φ1200 mm with an irradiance of a solar constant and an irradiation uniformity of less than 2.0%. This study provides accurate and reliable solar irradiation for laboratory calibration and performance testing of spacecraft payloads.
Aiming at the problems of low irradiation uniformity and a narrow irradiance regulation range in the existing solar simulators, an optical design method for meteorological solar simulators with high irradiation uniformity and wide-range irradiance is proposed. Using a xenon lamp and a variable coefficient non-coaxial ellipsoid reflector as the concentrator system, we analyze the causes of stray light in the optical integrator. The optimal design method of the integrator based on the anti-crosstalk diaphragm and the light propagation matrix model, which effectively suppress the stray light, is proposed. The irradiance regulation system is designed to continuously regulate the irradiance in a wide range. The optimal design method of the collimated system is given. The rationality of the system design is verified by the simulation of LightTools software. The results show that within the effective irradiation surface of , the irradiance is continuously adjustable in the range of , and the irradiation uniformity is better than 99.10% under different irradiances. This research breaks through the limitations of low irradiation uniformity and a narrow irradiance adjustment range of traditional meteorological solar simulators and can provide accurate and reliable solar irradiance for the verification and calibration of pyranometers.
In view of the lack of high-precision optical simulation equipment for dim space targets at present, in this study, a simulation method for dim space targets based on polarization stray light suppression is proposed, the overall optical system architecture of the optical engine for depolarization stray light suppression is constructed, the mechanism of stray light generation is explored, and the dark state light leakage suppression method is presented by compensating the phase of LCOS reflected light with wave plate; a high-image quality collimating optical system with large field of view and flat aberration is designed based on the illumination system optimization method of the critical angle matching of the spectroscopic film; and the polarization stray light suppression effect and star position simulation error of the dim target simulator are tested. The test results show that the illumination of the simulated dim target is ≮10−10 lx, the contrast is 6.96, the non-uniformity of the bright state is only 5.88%, and the simulation error of the star position is 9.9″. This research can make some contributions to enhancing the observability of detecting dim targets, breaking through the detection technology of extremely dark targets in space, developing advanced deep space detection capabilities, and improving the engineering technology system of deep space exploration.
Remote memory techniques for datacenter applications have recently gained a great deal of popularity. Existing remote memory techniques focus on the efficiency of a single application setting only. However, when multiple applications co-run on a remote-memory system, significant interference could occur, resulting in unexpected slowdowns even if the same amounts of physical resources are granted to each application. This slowdown stems from massive sharing in applications' swap data paths. Canvas is a redesigned swap system that fully isolates swap paths for remote-memory applications. Canvas allows each application to possess its dedicated swap partition, swap cache, prefetcher, and RDMA bandwidth. Swap isolation lays a foundation for adaptive optimization techniques based on each application's own access patterns and needs. We develop three such techniques: (1) adaptive swap entry allocation, (2) semantics-aware prefetching, and (3) two-dimensional RDMA scheduling. A thorough evaluation with a set of widely-deployed applications demonstrates that Canvas minimizes performance variation and dramatically reduces performance degradation.
Aiming at the problem that the error of multi-optical axis alignment is difficult to control in the simulation calibration test, a multi-optical axis dynamic compensation alignment method for the space environment simulation system is proposed. The effect of optical axis disturbance on the signal detection link was analyzed to obtain the alignment accuracy requirements, the optical axis alignment error compensation mechanism was established, the target simulation system with long pupil distance was designed, the alignment error transfer model based on topology structure was constructed, and the test prototype was built. The test results show that the static attitude alignment resolution is better than 3" and the position alignment resolution is better than 11µm. After online compensation, the position error is better than 11.04µm, and the energy error is better than 3.2%, which realizes the online monitoring and compensation of the optical axis alignment error of the ground space environment simulation system.