This work reviews two mechanical separation technologies (screw press and decanting centrifuge) which could be used in the dairy, beef, pig and anaerobic digestion sectors in nutrient-vulnerable zones in order to improve the sustainability of manure and anaerobic digestate management by decreasing agricultural phosphorus loss and reducing environmental impact on water quality. Capital and operating costs, separation efficiency and throughput, and management and processing of separated fractions, including transport costs, environmental impacts and the biosecurity of separated solids for export, were considered. Of the two technologies reviewed, screw press separation is a more cost-effective option (5-fold cheaper per tonne of feedstock) when lower amounts of export of phosphorus off farm are acceptable. For farms and those with anaerobic digesters managing larger volumes of manure/digestate, screw press separation is possible. However if higher levels of phosphorus removal are required, the use of decanting centrifugation is a viable option. Centralised processing facilities could also make use of decanting centrifuge technology to act as processing hubs for local farms within a distance that makes it economical for transport of manure/treated manure to/from the processor (the maximum distance for economical transport of raw manure and separated solids is approximately 70 km and 84 km, respectively). Both separation technologies could be integrated into agricultural manure and digestate management systems in order to provide a more sustainable approach to managing agricultural phosphorus loss and its associated impact on water quality. Screw press and decanting centrifuge separation could reduce phosphorous loss to water bodies by 34% and from 30 to 93%, respectively.
28 June 2023 in Journal of Environmental Management
Mechanical separation of anaerobic digestate has been identified as a method to reduce pollution risk to waterways by partitioning phosphorus in the solid fraction and reducing its application to land. Separators have adjustable parameters which affect separation efficiency, and hence the degree of phosphorous partitioning, but information on how these parameters affect separation performance is limited in the literature. Two well known technologies were investigated, decanter centrifuge and screw press, to determine the most efficient method of separation. Counterweight load and the use of an oscillator were adjusted for the screw press, while bowl speed, auger differential speed, feed rate and polymer addition were modified for the decanter centrifuge. Separation efficiency was determined for total solids, phosphorus, nitrogen, potassium, and carbon, and the total solids content of resulting fractions was measured. The decanter centrifuge had higher separation efficiency for phosphorus in all cases, ranging from 51% to 71.5%, while the screw press had a phosphorus separation efficiency ranging from 8.5% to 10.9% for digestate of ∼5% solids (slurry/grass silage mix). Separation by decanter centrifuge partitioned up to 56% of nitrogen in the solid fraction leaving a reduced nitrogen content in the liquid fraction available for land spreading; this nitrogen would most likely need to be replaced by chemical fertiliser which would add to the cost of the system. The decanter centrifuge is better suited to cases where phosphorus recovery is the most important factor, while the screw press could be advantageous in cases where cost is a limiting factor.
The excess loading of nutrients generated by agricultural activities is a leading cause of water quality impairment across the globe. Various management practices have been developed and widely implemented as conservation management strategies to combat water pollution originating from agricultural activities. In the last ten years, there has also been a widespread recognition of the need for nutrient harvesting from wastewaters and resource recovery. In Europe’s Northern Periphery and Arctic (NPA) areas, the expertise in water and runoff management is sporadic and needs to be improved. Therefore, the objective of this research was to perform a comprehensive review of the state of the art of Good Agricultural Practices (GAPs) for the NPA region. A set of questionnaires was distributed to project partners combined with a comprehensive literature review of GAPs focusing on those relevant and/or implemented in the NPA region. Twenty-four GAPs were included in the inventory. This review reveals that there is a large level of uncertainty, inconsistency, and a gap in the knowledge regarding the effectiveness of GAPs in nutrient reduction (NRE), their potential for nutrient recycling and recovery (NRR), and their operation and maintenance requirements (OMR) and costs. Although the contribution of GAPs to water quality improvement could not be quantified, this inventory provides a comprehensive and first-of-its-kind guide on available measures and practices to assist regional and local authorities and communities in the NAP region. A recommendation for incorporating and retrofitting phosphorus retaining media (PRMs) in some of the GAPs, and/or the implementation of passive filtration systems and trenches filled with PRMs to intercept surface and subsurface farm flows, would result in the enhancement of both NRE and NRR.