Numerous analytical studies for power augmentation systems can be found in the literature with the goal to improve the performance of wind turbines by increasing the energy density of the air at the rotor. All methods to date are only concerned with the effects of a diffuser as the power augmentation, and this work extends the semi-empirical shrouded wind turbine model introduced first by Foreman to incorporate a converging-diverging nozzle into the system. The analysis is based on assumptions and approximations of the conservation laws to calculate optimal power coefficients and power extraction, as well as augmentation ratios. It is revealed that the power enhancement is proportional to the mass stream rise produced by the nozzle diffuser-augmented wind turbine (NDAWT). Such mass flow rise can only be accomplished through two essential principles: the increase in the area ratios and/or by reducing the negative back pressure at the exit. The thrust coefficient for optimal power production of a conventional bare wind turbine is known to be 8/9, whereas the theoretical analysis of the NDAWT predicts an ideal thrust coefficient either lower or higher than 8/9 depending on the back pressure coefficient at which the shrouded turbine operates. Computed performance expectations demonstrate a good agreement with numerical and experimental results, and it is demonstrated that much larger power coefficients than for traditional wind turbines are achievable. Lastly, the developed model is very well suited for the preliminary design of a shrouded wind turbine where typically many trade-off studies need to be conducted inexpensively.
10 November 2025 in Archives of Computational Methods in Engineering
As engineering systems increase in complexity and performance demands intensify, Multidisciplinary Design Optimization (MDO) methodologies are becoming essential for integrating models from multiple disciplines to optimize complex multi-physics systems. Within this context, major challenges remain in selecting appropriate disciplinary fidelity levels, and how to couple them effectively. Multifidelity methods offer a promising path forward by strategically combining information sources of varying fidelity - whether computational or experimental - to enable efficient and scalable design exploration and optimization. Despite the development of numerous multifidelity methods, their comparative performance remains difficult to assess due to the absence of standardized benchmark frameworks capable of evaluating performance across diverse optimization tasks. To address this gap, this paper introduces a comprehensive benchmarking framework that includes: (i) a suite of analytical benchmark optimization problems designed to stress-test and validate multifidelity methods; (ii) a set of assessment metrics for quantifying and comparing performance over measurable objectives; and (iii) the classification, evaluation, and comparison of several families of multifidelity optimization methods and frameworks using the proposed benchmarks to identify their respective strengths and weaknesses in real-world scenarios. The proposed benchmark problems are analytically defined functions carefully selected to capture mathematical challenges commonly encountered in real-world applications, including high dimensionality, multimodality, discontinuities, and noise. Their closed-form nature ensures computational efficiency, high reproducibility, and a clear separation of algorithmic behavior from numerical artifacts. The accompanying performance metrics support the systematic evaluation of multifidelity methods, measuring both optimization effectiveness and global approximation accuracy. By providing a rigorous, reproducible, and accessible benchmarking framework, this work aims to enable the broader community to understand, compare, and advance multifidelity optimization methods for complex problems in science and engineering.
15 November 2019 in Journal of Engineering for Gas Turbines and Power
Supervised machine learning is used to classify a continuous and deterministic design space into a nondominated Pareto frontier and dominated design points. The effect of the initial training data quantity on the Pareto frontier and output parameter sensitivity is explored. The study is performed with the optimization of a subsonic small-scale cavity-stabilized combustor. A 3D geometry is created and parameterized using computer aided design (CAD) that is combined with a software for meshing, which automatically transfers grids and boundary conditions to the solver and postprocessing tool. Steady, compressible three-dimensional simulations are conducted employing a multiphase Realizable k–ε Reynolds-averaged Navier–Stokes (RANS) physics with an adiabatic flamelet progress variable (FPV) model. The near-wall turbulence modeling is computed with scalable wall functions (SWFs). For each computational fluid dynamics (CFD) simulation, four levels of adaptive mesh refinement (AMR) are utilized on the original cut-cell grid. There are 15 geometrical input parameters and three output parameters, viz., a pattern factor proxy, a combustion efficiency proxy, and total pressure loss (TPL). Three times the number of input parameters plus one (48) is necessary to yield an optimization independent of the initial sampling. This conclusion is drawn by examining and comparing the Pareto frontiers and global sensitivities. However, the latter provides a better metric. The relative influence of the input parameters on the outputs is assessed by Spearman's order-rank correlation and an active subspace analysis. Some persistent geometric features for nondominated designs are also discussed.