We demonstrate a nanosecond-pulse erbium-doped fiber laser that is passively mode locked by a hollow-core photonic crystal fiber filled with few-layered graphene oxide solution. Owing to the good solution processing capability of few-layered graphene oxide, which can be filled into the core of a hollow-core photonic crystal fiber through a selective hole filling process, a graphene saturable absorber can be successfully fabricated. The output pulses obtained have a center wavelength, pulse width, and repetition rate of $1561.2\mathrm{nm}$, $4.85\mathrm{ns}$, and $7.68\mathrm{MHz}$, respectively. This method provides a simple and efficient approach to integrate the graphene into the optical fiber system.

A simple linear cavity erbium-doped fiber laser based on a Fabry-Perot filter which consists of a pair of fiber Bragg gratings is proposed for tunable and switchable single-longitudinal-mode dual-wavelength operation. The single-longitudinal-mode is obtained by the saturable absorption of an unpumed erbium-doped fiber together with a narrow-band fiber Bragg grating. Under the high pump power (>166mW) condition, the stable dual-wavelength oscillation with uniform amplitude can be realized by carefully adjusting the polarization controller in the cavity. Wavelength selection and switching are achieved by tuning the narrow-band fiber Bragg grating in the system. The spacing of the dual-wavelength can be selected at 0.20nm (~ 25.62GHz), 0.22nm (~ 28.19GHz) and 0.54nm (~ 69.19GHz).

We demonstrate a wavelength-tunable, passively mode-locked erbium-doped fiber laser based on graphene and chirped fiber Bragg grating. The saturable absorber used to enable passive mode-locking in the fiber laser is a section of microfiber covered by graphene film, which allows light-graphene interaction via the evanescent field of the microfiber. The wavelength of the laser can be continuously tuned by adjusting the chirped fiber Bragg grating, while maintaining mode-locking stability. Such a system has high potential in tuning the mode-locked laser pulses across a wide wavelength range.

Graphene with zero-band gap can be easily saturated under strong excitation due to Pauli blocking. In this work, the graphene oxide membrane is reduced on the surface of microfiber by use of high temperature heating. Such reduced graphene oxide can interact with the strong evanescent field of the microfiber and enable saturable absorption in passively mode-locked fiber laser. The system can be effectively utilized to directly generate ultra-wide-band doublet pulses for high-capacity wireless communication applications.

In this work, we explore the possibility of using hybrid graphene/GaN phototransistors to get high responsivity, high speed, and large photosensitive area. The responsivity of our hybrid graphene/GaN phototransistors with a relatively large 15.2 mm² active area reaches 361 mA/W at 10 V and the response time is ~5 ms, much better performance than traditional GaN photodetectors. This is because graphene acts as the carrier transport channel with a high mobility and greatly increases the charge collection efficiency. Our results should shed more light on the role of graphene in hybrid phototransistors and open a feasible pathway to develop large area ultraviolet photodetectors with high responsivity and high speed.