In the present investigation, a fresh water green algae spirogyra is used as an inexpensive and efficient mild steel corrosion inhibitor. The study is carried out in 0.5 M HCl solution using weight loss measurements, scanning electron microscopy–energy-dispersive X-ray spectroscopy, X-ray diffraction, and Fourier transforms infrared (FT-IR) techniques. The maximum inhibition efficiency was found to be 93.03% at 2 g L−1. The adsorption of extract of spirogyra on mild steel surface obeys the Langmuir adsorption isotherm. Corrosion inhibition mechanisms were inferred from the temperature dependence of the inhibition efficiency as well as from calculation of thermodynamic and kinetic parameters which direct the process. FT-IR analysis of green algae spirogyra revealed the presence of hydroxyl, amino, and carbonyl groups, which are responsible for the adsorption on the mild steel surface. SEM analysis supported the inhibitive action of the spirogyra extract against the mild steel corrosion in acid solution. GRAPHICAL ABSTRACT
A simple spectrophotometric method has been developed for the determination of phosphate dissolved in soil and water. The method is based on the formation of phosphomolybdate with added ammonium molybdate followed by reduction with hydrazine in acidic medium. Orthophosphate and molybdate ions condense in acidic solution to give molybdophosphoric (phosphomolybdic) acid, which upon selective reduction (perhaps with hydrazinium sulphate) produces a blue colour, due to molybdenum blue of uncertain composition. The intensity of blue colour is proportional to the amount of phosphate. If the acidity at the time of reduction is 0.5 M in sulphuric acid and hydrazinium sulphate is the reductant, the resulting blue complex exhibits maximum absorption at 830 nm. The system obeys Lambert–Beer's law at 830 nm in the concentration range of 0.5–5 μg/mL of phosphate with a relative standard deviation (RSD) of 0.1% and correlation coefficient of 0.99. Molar absorptivity was determined to be 2.9 × 104 L mol–1 cm–1 at 830 nm. The method is also applicable for the determination of phosphate in nuclear reprocessing plants, medical science, clinical science, agriculture, metallurgy and environmental science.
29 August 2015 in Research on Chemical Intermediates
Copper oxide nanoparticles (CuO NPs) were synthesized from the methanolic extract of Prunus amygdalus pericarp. The presence of Phytocompounds such as tetrahydroaraucarlone, Prostaglandin A2, Molybdenum complex, trienoic acid and other phenolic constituents in almond hulls act as a reducing agent to synthesize the CuO NPs from Cu (II) to Cu (0) and as a capping agent to stabilize the nanoparticles. The prepared CuO NPs were characterized by UV-Vis Spectrophotometer, Fourier Transform Infrared Spectroscopy (FTIR), Gas Chromatography-Mass Spectra (GCMS), X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). The synthesized CuO NPs are crystalline with average size range 11–12 nm and this bioreduction green approach is more efficient to synthesize the controlled shape and size of CuO NPs for pharmaceuticals, optoelectronics and biotechnology purpose.