Traffic sign detection and recognition are crucial in the development of intelligent vehicles. An improved traffic sign detection and recognition algorithm for intelligent vehicles is proposed to address problems such as how easily affected traditional traffic sign detection is by the environment, and poor real-time performance of deep learning-based methodologies for traffic sign recognition. Firstly, the HSV color space is used for spatial threshold segmentation, and traffic signs are effectively detected based on the shape features. Secondly, the model is considerably improved on the basis of the classical LeNet-5 convolutional neural network model by using Gabor kernel as the initial convolutional kernel, adding the batch normalization processing after the pooling layer and selecting Adam method as the optimizer algorithm. Finally, the traffic sign classification and recognition experiments are conducted based on the German Traffic Sign Recognition Benchmark. The favorable prediction and accurate recognition of traffic signs are achieved through the continuous training and testing of the network model. Experimental results show that the accurate recognition rate of traffic signs reaches 99.75%, and the average processing time per frame is 5.4 ms. Compared with other algorithms, the proposed algorithm has remarkable accuracy and real-time performance, strong generalization ability and high training efficiency. The accurate recognition rate and average processing time are markedly improved. This improvement is of considerable importance to reduce the accident rate and enhance the road traffic safety situation, providing a strong technical guarantee for the steady development of intelligent vehicle driving assistance.

Trajectory tracking control is a key technology in the research and development of autonomous vehicles. With the aim of addressing problems such as low control accuracy and poor real-time performance, which can occur easily when an autonomous vehicle avoids obstacles, this research focuses on the trajectory tracking control algorithm for autonomous vehicle considering cornering characteristics. First, the vehicle dynamics model and tire model are established through appropriate simplification. Then, based on the basic principle of model predictive control, a linear time-varying model predictive controller (LTV MPC) that considers the cornering characteristics is designed and optimized. Finally, using CarSim and MATLAB/Simulink software, a joint simulation model is established and the trajectory tracking performance of the controlled vehicle under different vehicle speeds and road adhesion conditions are tested through simulation experiments in combination with the double-shift line reference trajectory. The simulation results show the LTV MPC controller that considers cornering characteristics has good self-adaptability under complicated and severe working conditions, and no cases, such as car sideslip or track departure, were observed. Compared with other controllers and algorithms, the designed trajectory tracking controller has remarkable comprehensive performance, exhibits superior robustness and anti-interference ability, and significant improvements in the trajectory tracking control accuracy and real-time performance. The proposed control algorithm is of great importance in improving the tracking stability and driving safety of autonomous vehicles under complex extreme conditions and conducive to the further development and improvement of the technological level of intelligent vehicle driving assistance.

Lane detection is an important foundation in the development of intelligent vehicles. To address problems such as low detection accuracy of traditional methods and poor real-time performance of deep learning-based methodologies, a lane detection algorithm for intelligent vehicles in complex road conditions and dynamic environments was proposed. Firstly, converting the distorted image and using the superposition threshold algorithm for edge detection, an aerial view of the lane was obtained via region of interest extraction and inverse perspective transformation. Secondly, the random sample consensus algorithm was adopted to fit the curves of lane lines based on the third-order B-spline curve model, and fitting evaluation and curvature radius calculation were then carried out on the curve. Lastly, by using the road driving video under complex road conditions and the Tusimple dataset, simulation test experiments for lane detection algorithm were performed. The experimental results show that the average detection accuracy based on road driving video reached 98.49%, and the average processing time reached 21.5 ms. The average detection accuracy based on the Tusimple dataset reached 98.42%, and the average processing time reached 22.2 ms. Compared with traditional methods and deep learning-based methodologies, this lane detection algorithm had excellent accuracy and real-time performance, a high detection efficiency and a strong anti-interference ability. The accurate recognition rate and average processing time were significantly improved. The proposed algorithm is crucial in promoting the technological level of intelligent vehicle driving assistance and conducive to the further improvement of the driving safety of intelligent vehicles.

Vehicle detection is an indispensable part of environmental perception technology for smart cars. Aiming at the issues that conventional vehicle detection can be easily restricted by environmental conditions and cannot have accuracy and real-time performance, this article proposes a front vehicle detection algorithm for smart car based on improved SSD model. Single shot multibox detector (SSD) is one of the current mainstream object detection frameworks based on deep learning. This work first briefly introduces the SSD network model and analyzes and summarizes its problems and shortcomings in vehicle detection. Then, targeted improvements are performed to the SSD network model, including major advancements to the basic structure of the SSD model, the use of weighted mask in network training, and enhancement to the loss function. Finally, vehicle detection experiments are carried out on the basis of the KITTI vision benchmark suite and self-made vehicle dataset to observe the algorithm performance in different complicated environments and weather conditions. The test results based on the KITTI dataset show that the mAP value reaches 92.18%, and the average processing time per frame is 15 ms. Compared with the existing deep learning-based detection methods, the proposed algorithm can obtain accuracy and real-time performance simultaneously. Meanwhile, the algorithm has excellent robustness and environmental adaptability for complicated traffic environments and anti-jamming capabilities for bad weather conditions. These factors are of great significance to ensure the accurate and efficient operation of smart cars in real traffic scenarios and are beneficial to vastly reduce the incidence of traffic accidents and fully protect people’s lives and property.

An accurate state-of-charge (SOC) can not only provide a safe and reliable guarantee for the entirety of equipment but also extend the service life of the battery pack. Given that the chemical reaction inside the lithium-ion battery is a highly nonlinear dynamic system, obtaining an accurate SOC for the battery management system is very challenging. This paper proposed a gated recurrent unit recurrent neural network model with activation function layers (GRU-ATL) to estimate battery SOC. The model used deep learning technology to establish the nonlinear relationship between current, voltage, and temperature measurement signals and battery SOC. Then the online SOC estimation was carried out on different testing sets using the trained model. The experiments in this paper showed that the GRU-ATL network model could realize online SOC estimation under different working conditions without relying on an accurate battery model. Compared with the gated recurrent unit recurrent neural (GRU) network model and long short-term memory (LSTM) network model, the GRU-ATL network model had more stable and accurate SOC prediction performance. When the measurement data contained noise, the experimental results showed that the SOC prediction accuracy of GRU-ATL model was 0.1–0.4% higher than the GRU model and 0.3–0.7% higher than the LSTM model. The mean absolute error (MAE) of SOC predicted by the GRU-ATL model was stable in the range of 0.7–1.4%, and root mean square error (RMSE) was stable between 1.2–1.9%. The model still had high prediction accuracy and robustness, which could meet the SOC estimation in complex vehicle working conditions.

In-wheel-motor-driven electric vehicles (IWM-EVs) provide more potential to enhance vehicle stability performance. However, traditional stability control relies on the current status fed back by sensors for stability judgment and control, only taking effect after the vehicle has already become unstable. In response to this issue, this paper proposes a pre-stability control strategy based on a hybrid dynamic state prediction method to predict dangerous driving conditions and intervene in vehicle stability control in advance. First, a driver-vehicle model is established to characterize the driver's driving intention and obtain the vehicle's ideal motion responses. Then, the methodology for implementing vehicle pre-stability control is introduced, which mainly includes sideslip angle estimation utilizing the extended Kalman filter, a hybrid dynamic state prediction approach based on vehicle model and data trends, and a vehicle pre-stability judgment method. Subsequently, a vehicle hierarchical controller is designed to achieve pre-stability control. The upper-level controller focuses on calculating the required additional yaw moment, and the lower-level controller aims to optimize torque distribution among the four wheels. Finally, the proposed pre-stability control strategy is validated by the hardware-in-the-loop test bench. The results show that the proposed control strategy can intervene in dangerous driving conditions in advance, and its mean errors of the yaw rate and sideslip angle are reduced by over 17.1% and 23.5%, respectively, compared with the traditional method, which significantly enhances vehicle stability and driving safety.