The effect of the Reynolds number on the flying wing common research model with a large sweep angle and small aspect ratio is studied by numerical simulation. The helicity cross-flow transition correction of the Langtry–Menter model is established in view of the deficient prediction accuracies of existing transition prediction models in simulating cross-flow transition, and the helicity parameters are calibrated to improve the prediction accuracy of the numerical method. The transition prediction method is verified by the test results of the standard model transition of the DLR-F5 wing and small-aspect-ratio flying wing. At the same time, the numerical method is effectively verified by comparing it to the aerodynamic/torque results of the standard model of the small-aspect-ratio flying wing. On this basis, the variation laws with the Reynolds number are analyzed for the aerodynamic and flow field characteristics of the flying wing common research model with a large sweep angle and small aspect ratio. The numerical simulation is mainly carried out in the high subsonic speed range (M = 0.9), and the simulated Reynolds number range is from 2 × 10⁶ to 80 × 10⁶, which includes the test Reynolds number and flight Reynolds number. The influence of turbulence on the surface flow pattern and drag characteristics of the small-aspect-ratio standard model is analyzed. Calculation results show that when the turbulence is greater than 0.4%, it has a considerable influence on the surface laminar flow range and total drag coefficient. The results reveal that the Reynolds number mainly affects the magnitude of friction in the cruise state (small angle of attack). The problem of the Reynolds number in the self-aligning region of the flying wing standard model with a small aspect ratio is further studied, and the Reynolds number is found to be greater than 10 × 10⁶. The drag and lift coefficients after the approach are close to the Reynolds number in the self-aligning region of the flying wing standard model with a small aspect ratio.

The aircraft wake vortex is an important factor affecting flight safety; as an important part of the aircraft, the powered nacelle will inevitably have an important impact on the aircraft wake vortex, so it is of great practical significance to research it. The present study focused on the numerical simulation of the wake flow of large aircraft (as the front aircraft) and the comparative analysis of the influence of engine jets on the wake flow. In order to meet the accuracy requirements and control the consumption of computing resources, LES and RANS methods were compared, and the RANS method was finally selected for subsequent calculation. The dynamic effect of jet flow was simulated by simplifying the boundary conditions of the inlet fan and outlet bypass as the mass flow boundary condition. The simulation results showed that the engine nacelle will have a significant impact on the morphology of the aircraft wake flow (position and strength of the main vortex in the wake flow system), which is caused by the vortices formed under the shear flow and separated flow of the nacelle. However, the nacelle will not significantly change the total strength of the wake vortex (half-plane circulation). The engine jet intensity causes additional turbulent mixing, which will accelerate the fusion of the nacelle vortex and ultimately change the intensity ratio of the inner wing vortex and the wingtip vortex, affecting the trajectory of the wake of the mean vortex. The study provides a corresponding reference for the following research on a wake vortex by a powered nacelle.

To study the aerodynamic characteristics of the convex structure of a surface-monitoring device on a high-speed train and to evaluate its impact on the aerodynamic performance of the high-speed train, numerical simulation research was conducted on three different layouts of the monitoring device. The computational fluid dynamics (CFD) method was used for the simulation study, and the unsteady compressible NS equation was used as the control equation. Hexagonal grid technology was used to reduce the demand for the grid quantity. The rationality of the grid size and layout was verified through grid independence research. To increase the accuracy of the numerical simulation, the γ-Re_θ transition model and improved delayed detached eddy simulation (IDDES) method were coupled for the simulation research. The aerodynamic characteristics of the different operation directions and configurations were compared and analyzed. The research results showed that the windward side of the single pantograph detection device experienced positive pressure, and the sideline and leeward sides experienced negative pressure. Increasing the fillet radius of the sideline could appropriately reduce the aerodynamic resistance. When the speed was about 110 m/s, the drag force coefficient of the detection device was 210~410 N, and the lateral force was small, which means that it had little impact on the overall aerodynamic force of the train. According to the results of the unsteady analysis of the layout with a large space, the resistance during forward travel was greater than that during negative travel. The streamlined upwind surface was conducive to reducing the scope of the leeward separation zone and the amplitude of the pressure fluctuation in the leeward zone, and it thus reduced the resistance. For the running trains, a vortex was formed on their leeward surface. The pressure monitoring results showed that the separated airflow had no dominant frequency or energy peak. The possibility of the following train top and other components experiencing resonance damage is low.