Hydrogen fuel cell vehicles can complement other electric vehicle technologies as a zero-emission technology and contribute to global efforts to achieve the emission reduction targets. This article spotlights the current deployment status of fuel cells in road transport. For this purpose, data collection was performed by the Advanced Fuel Cells Technology Collaboration Programme. Moreover, the available incentives for purchasing a fuel cell vehicle in different countries were reviewed and future perspectives summarized. Based on the collected information, the development trends in the last five years were analyzed and possible further trends that could see the realization of the defined goals derived. The number of registered vehicles was estimated to be 51,437 units, with South Korea leading the market, with 90% of the vehicles being concentrated in four countries. A total of 729 hydrogen refueling stations were in operation, with Japan having the highest number of these. The analysis results clearly indicate a very positive development trend for fuel cell vehicles and hydrogen refueling stations in 2021, with the highest number of new vehicles and stations in a single year, paralleling the year’s overall economic recovery. Yet, a more ambitious ramp-up in the coming years is required to achieve the set targets.
8 April 2010 in Journal of Fuel Cell Science and Technology
Increasing lifetime and performance is critical for proton exchange membrane fuel cell (PEMFC) using stainless steel plates. A good compromise between passivity and electrical contact resistance of the plate material is required. Measuring the potential of each plate during fuel cell operation is of paramount importance to lead to relevant ex situ tests in order to investigate new materials. From a review on methods used for potential measurements, the present work focused on the realization and use of a dynamic hydrogen electrode (DHE) device as a reference electrode in a PEMFC single cell and its evaluation in terms of accuracy and drift. With classic reference electrodes introduced into the flow field, measurements were shown to be irrelevant because of the impossibility to ensure good and stable ionic conductivity between the reference electrode and the plate when operating the cell. Several examples of DHE found in the literature were reviewed and used to realize a DHE, which showed correct accuracy and stability of its potential under fully humidified conditions. The experimental device was shown to be reliable and easily adaptable for different single cells. It was used to investigate transient phenomena while cycling a cell, but needs some improvement when the cell is operated with unsaturated gases.
15 November 2003 in Materials at High Temperatures