The injection of CO₂ into shale gas reservoirs can not only enhance shale gas recovery (ESGR), but also realize CO₂ geological storage (CGS). In this study, the competitive adsorption behaviors of CO₂ and CH₄ in shale were systematically reviewed, and the implication for shale gas recovery efficiency and CO₂ storage potential were discussed. The adsorption advantage of shale for CO₂ compared to CH₄ provides a guarantee of the feasibility of supercritical CO₂ (ScCO₂) enhanced shale gas exploitation technology. The selective adsorption coefficient of CO₂ and CH₄ by shale (S CO₂/CH₄ ) is an important parameter in evaluating the competitive adsorption behavior of CO₂/CH₄ in shale gas reservoirs, which is closely related to the mineral composition, reservoir temperature, pressure conditions, water content, and mixed gas composition ratio. In addition, the injection type, injection mode, and injection rate of gases also exhibit different effects on CO₂/CH₄ competitive adsorption. Furthermore, the interaction between ScCO₂ and the water-rock system will change the mineral composition and microstructure of shale, which will lead to changes in the adsorption behavior of shale on CO₂ and CH₄, so its influence on the competitive adsorption of CO₂/CH₄ cannot be ignored. Future research should integrate different research methods and combine with practical engineering to reveal the competitive adsorption mechanism of CO₂/CH₄ in shale reservoirs from both micro and macro aspects. This study can provide support for the integration technology of ScCO₂ enhanced shale gas exploitation and its geological storage.

Water is ubiquitous in coal reservoirs, and its distribution can have a remarkable influence on the effective pore space of methane. This study conducted the combination experiments of moisture equilibrium and prefreezing nitrogen adsorption-desorption to explore the adsorption behavior of water in coal pores and thus to reveal the distribution characteristics of water in pores with different scales as well as the influence of water on pore structures. The results showed that the adsorption mechanism of water vapor undergoes a transition from monolayer to multilayer to condensation with the increase in relative humidity (RH). The occurrence characteristics of adsorbed water in coal pores are controlled by the RH and pore size. When the RH is increased from 0 to 98%, the nitrogen adsorption capacity, specific surface area, and effective pore volume of the samples were all decreased significantly due to the different adsorption modes of water, which is more significant in pores with d < 10 nm. Additionally, the relative pressure corresponding to the branching position of the nitrogen adsorption-desorption curve will be changed with the increase in moisture content. Based on this, it is calculated that the adsorbed water will change the smoothness of the pore wall and the complexity of the pore structure.

Interwell interference is a universal problem in shale gas development and can cause severe reductions in the productivity of producing wells. Studies have attempted to identify the root cause of interference in producing wells, but the mechanisms of production reduction and recovery in impacted wells are still not clear. Thus, an effective preventive strategy is needed for producing wells when fracturing is performed in adjacent wells. According to the mechanism of spontaneous imbibition and water drainage in shale mico- and nanoscale pores, this paper introduces the water–gas distribution during fracturing and production and reveals that water drainage in micro- and nanoscale pores is mainly controlled by the amount of stored gas and follows the order of pore size. Based on this analysis, the mechanism by which interwell interference impacts the production of producing wells is explained for the first time. It is concluded that the secondary water invasion caused by interwell interference completely blocks the pores associated with long-term gas production but has little influence on the pores that have not yet drained or have produced only a small amount of gas, and smaller pores face a greater risk of water blockage. The proportion of drained pores formed during long-term gas production determines the effect of interwell interference on production; when more pores are drained by long-term gas production, greater damage occurs to the productivity of the producing well. The suggestion for preventing interwell interference is to reduce the time interval between fracturing operations at two adjacent wells, thereby diminishing the reduction in production.

The effect of water imbibition on characteristics of coalbed methane reservoirs, such as permeability, gas occurrence state, and gas production, is controversial. According to the mechanism of imbibition, gas and water distribution in blind pores is reconfigured during the fracturing process. Therefore, a new comprehensive model of pore pressure and permeability, based on the perfect gas equation and the weighted superposition of viscous flow and Knudsen diffusion, was established for micro- and nanoscale blind pores during water drainage. Using the numerical simulation module in the Harmony software, the effects of imbibition on coal pore pressure, permeability, and gas production were analyzed. The results showed that (1) water imbibition can increase pore pressure and reduce permeability, and (2) water imbibition is not always deleterious to gas production and estimated ultimate reserve (EUR), when the imbibition is constant, the thicker water film is deleterious to coalbed methane wells; when the thickness of water film is constant, more imbibition is beneficial to gas production and EUR. This research is beneficial to optimize the operation of well shut-ins after fracturing and provides methods for optimizing key parameters of gas reservoirs and insights into understanding the production mechanism of coalbed methane wells.