The structural anisotropy of open-cell foam leads to the anisotropy of effective thermal conductivity (ETC). To quantitatively analyze the effect of structural anisotropy on the anisotropy of ETC, a new predicting model for the ETC of anisotropic open-cell foam was proposed based on an anisotropy tetrakaidecahedron cell (ATC). Feret diameters in three orthogonal directions obtained by morphological analysis of real foam structures were used to characterize the anisotropy of ATC. To validate our proposed anisotropic model, the ETCs of real foam structures in three orthogonal directions predicted by it were compared with the numerical results, for which the structures of numerical models are reconstructed by X-ray computed tomography (X-CT). Using the present anisotropic model, the influences of the thermal conductivity ratio (TCR) and porosity of the foams on the anisotropic ratios of ETCs are also investigated. Results show that there is good consistency between the ETCs obtained by the anisotropic model and the numerical method. The maximum relative errors between them are 2.84% and 13.57% when TCRs are 10 and 100, respectively. The present anisotropic model can not only predict the ETCs in different orthogonal directions but also quantitatively predict the anisotropy of ETC. The anisotropies of the ETCs decrease with porosity because the proportion of the foam skeleton decreases. However, the anisotropies of ETCs increase with TCR, and there exist asymptotic values in anisotropic ratios of ETCs as TCR approaches infinity and they are equal to the relative Feret diameters in different orthogonal directions.

The distribution and evolution of air in airliner cabins is an important basis for the study of cabin thermal environment and pollutant propagation. Due to the complex heat and mass transfer problems caused by forced and natural convection in a large-scale space, the accurate prediction of air distribution in airliner cabins still faces huge challenges. This study takes the cabin of the Airbus A320 as the research object. The accurate numerical simulation of the flow and heat transfer process in an airliner cabin under mixing ventilation mode was carried out using the Hybrid Thermal Lattice Boltzmann Method (HTLBM) combined with GPU (Graphics Processing Unit) acceleration technology, and the influence of human thermal plumes on air distribution and evolution characteristics in an airliner cabin was analyzed. The research shows that the human thermal plume changes the air distribution in the passenger cabin. The thermal plume slows down the jet attenuation, increases the energy exchange in the area near the passengers, and offsets the jet trajectory. The airflow self-locking effect is easier to form in the passenger breathing area, which increases the time for the flow field to develop into the steady state. The influence of human thermal plumes on the airflow distribution in the passenger cabin cannot be ignored.