Graphene, as a new type of carbon material in the forefront of research, has been applied widely in the area of supercapacitors with the advantages of a large positive specific surface, high conductivity, stable chemical properties and good supercapacitor performance. In this study, an investigation on the electrochemical performance of reduced graphene oxides (rGOs) prepared from various natural graphites was conducted. X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, atomic force microscopy and electrochemical performance analysis were performed to characterize the as-prepared GOs and rGOs. The results demonstrated that a reduction modification of GO was necessary to optimize its electrochemical performance. The rGO has a great electrochemical performance with a good repair ability, better oxygen-containing functional group removal effect, lower structural defects, larger average size of the in-plane sp² region and great specific capacitance.

Supercapacitors (SCs) have generated a great deal of interest regarding their prospects for application in energy storage due to their advantages such as long life cycles and high-power density. Graphene is an excellent electrode material for SCs due to its high electric conductivity and highly specific surface area. Conductive polymers (CPs) could potentially become the next-generation SC electrodes because of their low cost, facile synthesis methods, and high pseudocapacitance. Graphene/CP composites show conspicuous electrochemical performance when used as electrode materials for SCs. In this article, we present and summarize the synthesis and electrochemical performance of graphene/CP composites for SCs. Additionally, the method for synthesizing electrode materials for better electrochemical performance is discussed.

As the residual flaky graphite ores become miscellaneous and fine, a single treatment technique for the middlings from the flotation process of graphite ore cannot efficiently recover the valuable graphite in the multistage grinding-flotation technology. In the study, the existence form of graphite and relationship of graphite with the associated gangue minerals were estimated by optical microscope analysis. The results indicated that the fine flaky graphite particles embedded with gangue minerals like a honeycomb, making it difficult to be beneficiated using the typical flotation technique. A combination technique of individual process and concentrated returning for the treatment of middlings was used to increase the graphite recovery based on the co-existing relationship between graphite and gangue minerals in the middlings. The graphite recovery of the final concentrate upgraded from 51.81% to 91.14% at a fixed carbon (FC) content of 92.01% by a beneficiation process consisted of once coarse (94.41% passing 74 μm) and rougher, five stages regrinding and six stages cleaning. The proposed treatment technique for middlings is of great significance to increase the recovery of fine flaky graphite.

Flotation is one of the most used methods to upgrade natural graphite resources. However, the efficiency is usually decreased due to the entrainment of undesirable fine gangue minerals. In this work, the impact of different factors such as particle size, pulp density, and flotation reagent on the entrainment of mica and quartz in a flake graphite flotation was studied. The single gangue mineral flotation results showed increased gangue entrainment when reducing the particle size of gangue minerals and increasing the pulp density. Moreover, the flotation of artificial mixtures indicated enhanced entrainment of mica and quartz in the presence of graphite particles. The collector and frother also strongly affect gangue entrainment by modifying the structure and stability of the froth. Kerosene, which has a prominent deforming feature, can reduce gangue entrainment more effectively than diesel.

As the high value and the scarcity of large-flake graphite ore resources, it is in the best interest to maximize the amount of large flakes and minimize any processing that will reduce flake sizes. In the study, the mineralogy of an African graphite ore was estimated using X-ray diffraction (XRD), X-ray fluorescence (XRF), and optical microscope analyses. The results indicated that it was a heavily weathered large flake graphite ore and the main gangue minerals were quartz and kaolinite. The graphite flakes were thick, bent, and fractured, and some clay minerals were embedded into the graphite interlayer, which made it difficult to prevent the large flakes from being destroyed using mechanical grinding methods. An approach of steel rod coarse grinding and pebble regrinding effectively reduced the destruction of graphite flakes and improved the grinding efficiency. In addition, comparing with the conventional process, a pre-screening process was applied and the content of large flakes in the final concentrate was significantly improved.

The dispersion and agglomeration behavior of flaky graphite particles in an aqueous solution was studied. The small particles of flaky graphite naturally formed a large and compact agglomeration in an aqueous solution at pH 7.0 and 9.0, respectively. The theoretical calculation result based on typical DLVO theory was opposite the phenomenon observed by optical microscope, indicating that the interaction force between the flaky graphite particles exceeded the van der Waals and electrostatic double-layer forces. When the extended DLVO theory was used, the total interaction energy (U_T = U_A + U_R + U_HI) was negative over most of the distance range, indicating that the agglomeration of the small particles was attributed to the attraction. This result indicated that hydrophobic interactions dominated the dispersion and agglomeration behavior of the hydrophobic flaky graphite particles. GRAPHICAL ABSTRACT