The need for maritime freight transport of various goods has never been greater. Consequently, ships are designed with ever-increasing dimensions, with the emphasis, of course, on length. One of the many challenges in the design of large ships is the prediction of their behavior in waves, i.e., motions, and consequently, added resistance. In this paper, a comparative study of two numerical tools for estimating ship motions and added resistance is presented. The first tool is the well-established DNV’s commercial seakeeping code Wasim, a weakly nonlinear potential flow (PF) solver based on a Rankine panel method. The other is the increasingly recognized open-source Computational Fluid Dynamic (CFD) toolkit OpenFOAM^®, a viscous flow solver with a turbulence model; it is based on the finite volume method (FVM) combined with a volume-of-fluid (VOF) technique for sea-surface evolution. The study is carried out for two ship seakeeping cases in head-sea regular waves, respectively, without and with ship forward speed. The first case refers to a 6750 TEU containership scale model developed at the LHEEA laboratory in Nantes for a benchmark study, providing experimental data for all test cases. Pitch and heave response is calculated and compared with the experimental values. The second case refers to a KRISO container ship, an extensively researched hull model in ship hydrodynamics. In addition to the pitch and heave, added resistance is also calculated and compared with the experimental values. Hence, it provides a comprehensive basis for a comparative analysis between the selected solvers. The results are systematically analyzed and discussed in detail. For both cases, deterioration of the PF solution with increasing wave steepness is observed, thus suggesting limitations in the modeled nonlinear effects as a possible reason. The accuracy of the CFD solver greatly depends on the spatial discretization characteristics, thus suggesting the need for grid independence studies, as such tools are crucial for accurate results of the examined wave–body interaction scenarios.

A benchmark study of 10 different numerical methods for ship motion and load assessment is presented. Pitch motions and midship vertical bending moments are compared to model test results for a containership at zero speed in head regular waves. The wave steepness is varied from 2.1% to 10.5%. The model tests show that pitch and the vertical bending moment (VBM) display nonlinear behavior even for low-steepness waves. It is demonstrated that computational fluid dynamics (CFD) methods can reproduce the ship responses with good accuracy, even in very steep waves, involving green water and parts of the ship going in and out of water. Weakly nonlinear potential-theory methods tend to overestimate the pitch motions and the sagging moments as the wave steepness increases. For the vertical bending moment in steep waves, the 3D panel methods did not give significantly better results than those obtained with the nonlinear strip theories.

Awareness of environmental protection is increasing, especially in recent years when warnings of imminent climate change have begun to appear in public space. In addition to one of the most significant environmental pollutants, global maritime transport is also mentioned, where environmental pollution is explicitly in the form of exhaust gases from marine propulsion engines. The trend of developing environmentally friendly, so-called "eco" ships is on the rise, primarily in the development of electric ferries designed to transport passengers and vehicles on short routes. This paper deals with a seakeeping analysis of a double ended ferry which is intended for sea route between Brestova and Porozina in the North Adriatic. The adopted dimensions and shape of the ship, the characteristics of sea waves for the adopted spectrum will be presented, and then the obtained results, considering the limits of the ship operability related to passenger comfort and cargo safety. The analysis was performed using computer software "Sesame HydroD". A seakeeping estimation for the ferry is finally adopted and possible directions for future developments are proposed.