Optical transmission through complex media such as biological tissue is fundamentally limited by multiple light scattering. Precise control of the optical wavefield potentially holds the key to advancing a broad range of light-based techniques and applications for imaging or optical delivery. We present a simple and robust digital optical phase conjugation (DOPC) implementation for suppressing multiple light scattering. Utilizing wavefront shaping via a spatial light modulator (SLM), we demonstrate its turbidity-suppression capability by reconstructing the image of a complex two-dimensional wide-field target through a highly scattering medium. Employing an interferometer with a Sagnac-like ring design, we successfully overcome the challenging alignment and wavefront-matching constraints in DOPC, reflecting the requirement that the forward- and reverse-propagation paths through the turbid medium be identical. By measuring the output response to digital distortion of the SLM write pattern, we validate the sub-wavelength sensitivity of the system.
We review the current state of research in endoscopic optical coherence tomography (OCT). We first survey the range of available endoscopic optical imaging techniques. We then discuss the various OCT-based endoscopic methods that have thus far been developed. We compare the different endoscopic OCT methods in terms of their scan performance. Next, we examine the application range of endoscopic OCT methods. In particular, we look at the reported utility of the methods in digestive, intravascular, respiratory, urinary and reproductive systems. We highlight two additional applications—biopsy procedures and neurosurgery—where sufficiently compact OCT-based endoscopes can have significant clinical impacts.
High-speed and high-resolution imaging techniques have been long sought for material metrology and biological structure observation. Such examples include the inspection of large area subwavelength structures and optical metasurfaces widely used in integrated photonics,1,2 monitoring fast semiconductor wet etching process,3 microdroplet evaporation dynamics,4 observation of live cell morphology, fast dynamics in a large cell population,5,6 and tracking of high-speed cell motions.7,8 Conventionally used techniques for material metrology, including scanning electron microscopy (SEM) and atomic force microscopy (AFM), are limited in throughput and speed. In addition, once the structures are encapsulated in dielectric claddings, which are the standard practice for photonic devices, SEM or AFM characterization becomes impractical, as the cladding often obscures the electron imaging contrast between core and cladding and prohibits physical contact of the AFM probe with the structure. On the other hand, the challenge for light microscopy is that many subwavelength structures and living cells share the common feature of being transparent and thin. Under conventional bright-field microscopes, those structures cannot be well resolved due to their weak light absorption. With chemical staining, fluorescence microscopy can be applied to image these structures. However, for certain live cell imaging and most material metrology applications, label-free or noninvasive imaging is favored for minimizing sample perturbation. Furthermore, fluorescence-based imaging techniques are usually slow, thus limiting their use in high-speed imaging applications.
We present an imaging modality capable of providing high-speed optical dispersion measurements of live cells. The technique permits wide-field measurement of the optical phase shifts introduced by a sample for multiple discrete wavelengths in a single image capture. Utilizing spatial modulation and the wavelength dependence of the interference-fringe spacing, average refractive index as a function of wavelength is obtained, yielding optical dispersion measurements of the sample under observation. Because of its simple and low-cost design, the technique can be readily integrated into a standard microscope to collect additional diagnostic information about biological cells.
Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.
10 August 2016 in Proceedings of the National Academy of Sciences
Significance: There exists a critical need for developing biomarkers reflecting clinical outcomes and for evaluating the effectiveness of treatments for sickle cell disease patients. Prior attempts to find such patient-specific markers have mostly relied upon chemical biomarkers or biophysical properties at hypoxia with limited success. We introduce unique biomarkers based on characterization of cellular biophysical properties at normoxia and show that these markers correlate sensitively with treatment using hydroxyurea (HU), the only US Food and Drug Administration (FDA)-approved drug for sickle cell disease patients. Our unique choice of cellular biophysical markers strongly correlates with mean cellular volume rather than fetal hemoglobin level, which provides insights into possible mechanisms through which HU treatment results in beneficial clinical outcomes.