The evolving expertise in optical wireless communication (OWC) and free space optics (FSO) proposes numerous benefits above conventional radio network owing to unlicensed bandwidth, low installation time, affordable cost, high data rate and insusceptibility to electromagnetic interference. In this paper, two wireless optical communication systems are investigated, one with FSO channel and another with OWC channel. Both the systems have been analyzed using quality factor and bit error rate as performance metrics. The mathematical model for received optical power and Pointing error has been taken into account for system considerations. It was observed that superior quality factor and minimum bit error rate for long link distance (80 km) was achieved with OWC channel while FSO did well only for short range (800 m) communication.
This paper presents a novel 160 Gbps free space optics (FSO) communication system for 6G applications. Polarization division multiplexing (PDM) is integrated with an optical code division multiple access (OCDMA) technique to form a PDM-OCDMA hybrid. There are two polarization states: one is X-polarization generated from adjusting the azimuthal angle of a light source at 0° while the other is Y-polarization which is generated by adjusting the azimuthal angle of a light source at 90°. Each polarization state is used for the transmission of four independent users. Each channel is assigned by permutation vector (PV) codes and carries 20 Gbps data. Four different weather conditions are considered for evaluating the performance of our proposed model. These weather conditions are clear air (CA), foggy conditions (low fog (LF), medium fog (MF), and heavy fog (HF)), dust storms (low dust storm (LD), moderate dust storm (MD), heavy dust storm (HD)), and snowfall (wet snow (WS) and dry snow (DS)). Bit error rate (BER), Q-factors, maximum propagation range, channel capacity, and eye diagrams are used for evaluating the performance of the proposed model. Simulation results assure successful transmission of 160 Gbps overall capacity for eight channels. The longest FSO range is 7 km which occurred under CA while the minimum is achieved under HD, which is 0.112 km due to large attenuation caused by HD. Within fog conditions, the maximum propagation distances are 1.525 km in LF, 1.05 km in MF, and 0.85 km in HF. Likewise, under WS and DS, the proposed system can support transmission distances of 1.15 km and 0.28 km, respectively. All these transmission distances are achieved at BER less than 10−5.
31 October 2020 in Optical and Quantum Electronics
This study investigates the technical aspects of the 1550nm free space optical (FSO) link in extreme Arctic weather, specifically in falling snow, which is currently understudied. We measured the time variation of the received optical power in many snowfall events and derived attenuation statistics. Continuous measurements allowed us to estimate attenuation under varying temperatures and humidity to examine the after-snow channel impairments. Our results show several shortcomings in the International Telecommunication Union-Radio Communication (ITU-R) snow attenuation model and verify that a correlation exists between snow features, snowfall rate, temperature, and humidity in determining the total snow attenuation. We demonstrated the relationship between snow properties, temperature, humidity, and attenuation under both in-snow and post-snow environments. Furthermore, based on the experimental results, we recommend several mitigation techniques to realize FSO communication during challenging Arctic weather conditions. Lastly, we present a feasibility study of FSO in Svalbard at 78°N latitude.
Free space optics is a light-wave communication technology that operates in the near-infrared region of the electromagnetic spectrum (about 700–1675 nm) and uses atmospheric channel as the transmission medium for both inter-satellite and terrestrial networks. However, the operational proficiency of free space optical communication system is highly affected by channel dynamics which cause signal attenuation that results in short link range. To master these shortcomings different methods have been suggested in the literature, from transceiver design and diverse channel models to adaptive algorithms. In this manuscript, the design and performance investigation of free space optical system has been carried out for three optical transmission windows; 850, 1310 and 1550 nm by means of on-off keying digital modulation technique. The system analysis has been done taking bit error rate, quality factor and received optical power as the performance metrics. Their variation pattern with respect to varying link parameters such as range, transmitted optical power and beam divergence has been investigated. In addition, the observations made are well validated with thorough mathematical justification.
Internet of things witnessed rapid growth in the last decade and is considered to be a promising field that plays an all-important role in every aspect of modern-day life. However, the growth of IoT is seriously hindered by factors like limited storage, communication capabilities, and computational power. On the other hand, cloud has the potential to support a large amount of data as it has massive storage capacity and can perform complex computations. Considering the tremendous potential of these two technologies and the manner in which they complement one another, they have been integrated to form what is commonly referred to as the cloud of things (CoT). This integration is beneficial as the resulting system is more robust, intelligent, powerful, and offers promising solutions to the users. However, the new paradigm (CoT) is faced with a significant number of challenges that need to be addressed. This chapter discusses in detail various challenges like reliability, latency, scalability, heterogeneity, power consumption, standardization, etc. faced by the cloud of things.