High-pressure air blasting (HPAB) is one type of physical blasting technique that enhances the extraction rate of coalbed methane by impacting the coal mass with high-pressure gas to create cracks within it. First, based on the physical and mechanical parameters of the simulated coal rock mass, the RHT constitutive model of the coal rock mass was established, and its parameters were determined. Then, the laws of crack propagation and stress wave decay in coal induced by high-pressure air blasting were revealed by comparing the effect with that of equivalent explosive blasting. Next, the HPAB experiment was simulated to explore the coal crack propagation law under in-situ stress conditions. Finally, the HPAB experiment was carried out and the results of this experiment were compared with the numerical simulation results. The results indicate that the crack propagation induced by high-pressure air blasting is considered as two major stages, i.e., the crack initiation and crack propagation stage induced by the stress wave and the crack stable propagation stage induced by the duration high-pressure gas. In the case of equal energy, the peak stress wave of high-pressure gas is smaller, decays more slowly and has a longer action time, compared to explosive blasting. Therefore, the number of initial random cracks in coal mass induced by high-pressure air blasting is less, and the range of crack propagation induced by high-pressure air blasting is larger. When λ = 0 (λ is the ratio of the horizontal in-situ stress to the vertical in-situ stress), the in-situ stress in the coal seam can promote the propagation of vertical cracks but inhibit the propagation of horizontal cracks. When λ = 0.5 and 1, the in-situ stress inhibits the propagation of both horizontal and vertical cracks.

The low permeability of coal seams has always been the main bottleneck restricting coalbed gas drainage. To improve the permeability of a coal seam, a high-energy gas fracturing technology is proposed. Firstly, based on the high-energy gas fracturing mechanism and gas production principle of fracturing agent, a fracturing agent applicable to coal reservoirs was developed, and its performance and sensitivity were tested. Then, a high-energy gas-fracturing simulated coal sample test was conducted, and the drilling wall pressure and strain of the simulated coal sample were tested. The results show that high-energy gas fracturing technology is a safe and efficient technical means for improving the permeability of coal reservoirs. The pressure–time curve of the borehole wall under the action of high-energy gas can be divided into three stages, namely, the rapid pressure-rising stage, steady pressure stage, and falling stage; the maximum pressure in the borehole is about several hundred MPa, and the pressure distribution in the borehole is not uniform. Compared with explosives blasting, the stress wave intensity in coal caused by the action of high-energy gases is low, the duration is short, and the peak stress attenuates slowly with increasing distance. Under the action of high-energy gas, no crush zone is generated near the borehole; the number of radial cracks produced is small but long. The extent of the fracture zone depends mainly on the quasi-static splitting wedge effect of the high-energy gas.

The low permeability of coal seams has always been the main bottleneck restricting coalbed methane drainage. In this paper, a coal seam anti-reflection technology with solid-propellant blasting was proposed, and the composition and proportion of the solid propellants were determined based on the principle of oxygen balance. The authors designed a solid-propellant blasting damage fracture experiment of simulation coal, tested the impact pressure on a blast hole wall, measured the ultrasonic wave velocity, explosive strain and crack propagation velocity, and then revealed the blasting damage fracture process and mechanism of coal based on the experimental results and damage fracture mechanics theory. The history curve of impact pressure time can be divided into three processes including the slow pressurization process, dramatic increase process, and nonlinear pressure relief process. The pressure distribution along the whole blasting hole was uneven, and the peak pressure was relatively small, but the pressure action time was long. The damage and fracture process of coal solid-propellant blasting can be divided into two stages including the rapid damage fracture development stage and the stable slow damage fracture development stage. Firstly, the explosion stress wave produced and rapidly accelerated the radial cracks extension; secondly, the cracks slowly expanded over a large area by the combined effects of the high-pressure gases, the gas, and the original rock stress.

The use of clean energy is an important part of promoting sustainable energy development. As a clean energy source, coalbed methane, during the mining process, the position of the nozzle can influence coalbed methane extraction efficiency by affecting the cracking effect of coal. To investigate the impact of nozzles on the effect of coal fracture, a test of simulated coal by high-pressure air blasting was executed using nozzles 100 mm, 200 mm, and 250 mm from the orifice. Based on the test results and theories of fracture damage mechanics, two damage fracture models were established for the nozzles located in the middle-upper and middle-lower of the blasthole, respectively. The fracturing process and increased permeability mechanism of the coal were revealed by these two models. The results show that: when the nozzle is 100 mm from the orifice, the high-pressure air impacts the blasthole wall first, similar to a uniform expansion. Multiple longitudinal cracks are formed penetrating the coal. The permeability of the coal seam is greatly improved. When the nozzle is 200 mm and 250 mm from the orifice, the high-pressure air first impacts the bottom of the blasthole. The bottom hole angle and apex hole angle first form horizontal cracks while longitudinal cracks only appear at the same depth as the blasthole. The nozzle is 250 mm from the orifice to form a compaction zone at the bottom of the blasthole. The crack density is small and the tangential depth is shallow, which is not conducive to coalbed methane mining. The results of the research offer a theoretical framework and point of reference for the use of high-pressure air blasting technology in the extraction of coalbed methane (CBM).

Accurate prediction for Peak Particle Velocity (PPV) induced by blasting vibrations is crucial for controlling engineering risks and optimizing blasting parameter design. In order to address the practical challenges of numerous influencing factors and limited available research samples for PPV, a PPV prediction model based on a Backpropagation neural network (BP) optimized by the Improved Grey Wolf Optimizer (I-GWO), termed the I-GWO-BP network, is developed. The I-GWO algorithm was employed to efficiently search for the optimal combination of weights and bias parameters that need to be optimized in the BP neural network. The results indicate that the proposed integrated prediction model forecasts PPV with greater accuracy and reliability than comparative models including the Grey Wolf Optimizer-enhanced BP model (GWO-BP) and Extreme Learning models (ELM). Beyond demonstrating optimal prediction performance, explainability analysis used the SHapley Additive exPlanations (SHAP)method further enhances the I-GWO-BP model’s interpretability, revealing that the distance from the blasting center is the most significant influencing factor. The application potential of the I-GWO-enhanced neural network for predicting PPV under similar geological and operational conditions is highlighted, providing a methodological reference for related prediction work.