Previous research shows that freeze–thaw cycles represent one of the most dangerous threats to reinforced concrete (RC) structures. However, there is almost no experimental data on the effects of freeze–thaw cycles on the seismic behavior of RC columns showing flexure-shear failure. In this study, three columns with the shear span-to-depth ratio of 2.5 were subjected to different numbers of freeze–thaw cycles (FTCs) and pseudo-static testing. The seismic performance indexes of the specimens were analyzed in terms of hysteretic behavior, skeleton curves, shear deformation, and energy dissipation. The test observations show that the failure patterns of the test columns altered from the flexure dominated to shear dominated, owing to the more severe deterioration in shear capacity induced by freeze–thaw attack than in flexure capacity. The test results also indicate that freeze–thaw cycles significantly decrease the ductility and energy dissipation of test columns, and they increase the contributions of shear deformation to the total deformation.

In order to solve two problems with the traditional optimization method of steel reinforced high strength high performance concrete (SRHPC) frame structures, a fuzzy mathematics and performance-based optimization method for the life-cycle cost of SRHPC frame structures is proposed. In the optimization program, quantitative seismic performance indicators of SRHPC frame structures are determined according to the experimental results of SRHPC columns. Furthermore, by considering the fuzzy reliability of structures under each performance level, the life-cycle optimization model of SRHPC frame structures can be established. In order to solve the problem of too many variables and constraints in the optimization process, a two-step optimization method is proposed. Finally, an optimization example is carried out through the MATLAB program to demonstrate the feasibility of this model.