The bone healing process is influenced by various physiological factors. Fracture fixation traditionally relied on rigid metallic implants. However, excessively rigid constructs can lead to complications, necessitating revision surgery. This review focuses on approaches to improve bone healing by introducing adequate interfragmentary movement (IFM) at the fracture site. IFM promotes secondary fracture healing and callus formation. Studies suggest that rigid fixation may impair fracture healing by inhibiting callus formation and causing stress shielding. Titanium alloy locking plates have been shown to be biomechanically superior to stainless steel. Flexible fixation and techniques to regulate implant stiffness are crucial for managing fractures with bridge plating. Materials with a lower Young’s modulus balance biomechanical properties. A novel TiNbSn alloy with a low Young’s modulus has been developed to address stress shielding issues. It is effective in promoting osteosynthesis, bone healing, and superior mechanical properties compared with materials with higher Young’s moduli. The enhanced formation of bone and callus associated with TiNbSn alloy suggests its promise for use in fracture treatment plates. Understanding the biomechanics of fracture healing, optimizing fixation stiffness, and exploring innovative materials like TiNbSn alloys, are crucial for advancing approaches to accelerate and enhance bone healing.

Titanium alloys are useful for application in orthopedic implants. However, complications, such as prosthetic infections and aseptic loosening, often occur after orthopedic devices are implanted. Therefore, innovation in surface modification techniques is essential to develop orthopedic materials with optimal properties at the biomaterial–bone interface. In this review, we present recent research on the improvement in the osteoconductivity and antibacterial effect of the Ti-33.6% Nb-4% Sn (TiNbSn) alloy by anodic oxidation and other related studies. TiNbSn alloys are excellent new titanium alloys with a low Young’s modulus, high tensile strength, and with gradient functional properties such as a thermally adjustable Young’s modulus and strength. Titanium dioxide (TiO₂), when obtained by the anodic oxidation of a TiNbSn alloy, improves bone affinity and provides antibacterial performance owing to its photocatalytic activity. The safety of TiO₂ and its strong bonding with metal materials make its method of preparation a promising alternative to conventional methods for improving the surface quality of orthopedic implants. Implementing anodization technology for TiNbSn alloys may alleviate orthopedic surgery-related complications, such as loosening, stress shielding, and infection after arthroplasty.

TiNbSn alloy is a high-performance titanium alloy which is biosafe, strong, and has a low Young’s modulus. TiNbSn alloy has been clinically applied as a material for orthopedic prosthesis. Anodized TiNbSn alloys with acetic and sulfuric acid electrolytes have excellent biocompatibility for osseointegration. Herein, TiNbSn alloy was anodized in a sulfuric acid electrolyte to determine the antimicrobial activity. The photocatalytic activities of the anodic oxide alloys were investigated based on their electronic band structure and crystallinity. In addition, the cytotoxicity of the anodized TiNbSn alloy was evaluated using cell lines of the osteoblast and fibroblast lineages. The antimicrobial activity of the anodic oxide alloy was assessed according to the ISO 27447 using methicillin-susceptible Staphylococcus aureus, methicillin-resistant Staphylococcus aureus, and Escherichia coli. The anodic oxide comprised rutile and anatase titanium dioxide (TiO₂) and exhibited a porous microstructure. A well-crystallized rutile TiO₂ phase was observed in the anodized TiNbSn alloy. The methylene blue degradation tests under ultraviolet illumination exhibited photocatalytic activity. In antimicrobial tests, the anodized TiNbSn alloy exhibited robust antimicrobial activities under ultraviolet illumination for all bacterial species, regardless of drug resistance. Therefore, the anodized TiNbSn alloy can be used as a functional biomaterial with low Young’s modulus and excellent antimicrobial activity.

The photocatalytic properties of anodic oxides on a newly developed TiNbSn and commonly used Ti6Al4V alloys as biomaterials were investigated. The alloys were anodized in an electrolyte of sodium tartrate acid with H₂O₂at a high voltage and the mechanism of the photocatalytic and antiviral activities was studied. The anodized TiNbSn and Ti6Al4V exhibited highly crystallized rutile TiO₂and poorly crystallized anatase TiO₂, respectively. X-ray photoelectron spectroscopy analysis revealed the presence of oxides of the alloying elements in addition to TiO₂. The anodized TiNbSn exhibited higher activities than Ti6Al4V, and electron spin resonance spectra indicated that the number of hydroxyl radicals (⋅OH) generated from the anodized TiNbSn was higher than that from the anodized Ti6Al4V. The results can be explained by two possible mechanisms: the higher crystallinity of TiO₂on TiNbSn than that on the Ti6Al4V reduces the number of charge recombination sites and generates abundant ⋅OH; charge separation in the anodic oxide on TiNbSn due to the electronic band structure between TiO₂and the oxides of alloying elements enhances photo activities. The excellent photoinduced characteristics of the anodized TiNbSn are expected to contribute to the safe and reliable implant treatment.

Access full-text academic articles: J-STAGE is an online platform for Japanese academic journals.