A Wilkinson power divider (WPD) with bandpass property and an ultra-wide band harmonic suppression is proposed in this letter. The frequency-selecting coupling structure is embedded to the conventional quarter-wavelength transmission line, which can realize an ultra-wide harmonic suppression with three transmission zeros. Short-ended meander line stubs are shunted at the both output ports for dc block and provide an extra transmission zero for the passband. The proposed WPD operates with a -20 dB bandwidth from 1.74 to 3.71 GHz with an ultra-wide stopband to suppress the dc, 3 f0, 5 f0, and 7 f0 harmonic components. The proposed WPD has a compact size of 14.65 mm × 19.64 mm (0.19λg × 0.25λg).
In this paper, a size reduced tri-band Gysel power divider (PD) with ultra-wideband harmonics suppression performance, simple structure, high-power handling capability, and independently controllable bandwidth is firstly presented. The three passbands are introduced by two tri-band biasing networks whose impedances can also be utilized to control the bandwidths of the three passbands independently. With the introduction of slow wave transmission lines (TLs) and coupled lines with series open-circuited stubs, a reduced size and ultra-wide stopband can be obtained, respectively. Detailed closedform design equations are derived and validated with a design of PD operating at 2.0 GHz, 2.5 GHz, and 3.0 GHz. Also, two additional circuits are designed, simulated, and fabricated. One is utilized to obtain the optional range of the three passbands, and the other is to make a comparison with the proposed PD. All the measured results agree well with the corresponding simulated ones. Proper impedance matching, isolation, and a wider 3 dB fractional bandwidth can be obtained, which is 18.5%, 20.7%, and 13.0% at each passband. In addition, more bands can be easily extended to the proposed PD by introducing more opencircuited stubs in the tri-band biasing networks.
Substrate-integrated waveguides (SIWs) are widely used in microwave systems owing to their low cost and ease of integration. In this study, an SIW-based resonator that reacts to the complex permittivity variation of solutions with dimensions of 79.2 mm × 59.8 mm is introduced. This octagon-shaped sensor can be installed on a preliminary monitoring system to test water quality by observing the parameter variations caused by external factors. The resonant structure was used to test different concentrations of ethanol–water and acetone–water mixtures for verification. The resonant frequency and quality factor (Q-factor) were found to vary with the relative complex permittivity of the liquid in the S-band, and the electric field distribution varied when liquid droplets were placed in the center of the substrate. The designed sensor operates at 2.45 GHz in the air, and the observed minimum resonant frequency shift with liquid was 15 MHz. The measurement error was approximately 3.1%, and the results reveal a relationship between the resonant frequency and temperature as well. Considering the observed sources of error, the measured relative permittivity is consistent with the actual values. The proposed sensor is economically convenient and suitable for various test environments.
15 June 2018 in Microwave and Optical Technology Letters