This paper proposes a novel two level single stage (TLSS) direct AC-AC converter for realizing a 7.2 kV medium voltage (MV) solid state transformer (SST) based on 15kV SiC MOSFETs. A new current-fed series resonant converter (CFSRC) topology is proposed to address major challenges in medium voltage AC-AC converters such as achieving zero voltage switching (ZVS) for the MV MOSFETs across wide voltage and load ranges and minimizing system capacitance. The topology is analyzed with both time domain analysis and fundamental harmonic approximation (FHA) to provide useful equations for circuit design. Constant deadtime strategy is adopted, allowing partial ZVS to occur at low voltage levels. ZVS behavior over wide voltage range is investigated, and calculation of the associated loss from partial ZVS is presented. The 15 kV MOSFET has been tested continuously at a park voltage of 10 kV and 37 kHz, indicating stable device operation and an extremely high voltage frequency figure of merit (FOM). Moreover, inherent cycle by cycle current limiting in the proposed CFSRC under short circuit is realized by paralleling diodes to the LV resonant capacitors. A SST that converts 7.2 kV AC to 240 V AC is developed with a peak efficiency of 97.8%.
8 July 2024 in IEEE Transactions on Transportation Electrification
Digital twin capabilities have been limited to a single function, but the reality of physical assets requires digital twins with multi-domain, multi-function representations. Digital twins can and should be designed with multi-domain and multi-functional capabilities to enable adaptability to a diverse set of system domains and perform various representation tasks. This approach allows the digital twin to be as specialized as the physical asset it serves. This study introduces a framework enabling the development of multi-domain, multi-functional digital twins, adaptable for use in various representation tasks. The proposed framework utilizes a collection of digital images for an accurate depiction of different facets of an asset, ensuring a detailed yet unified digital twin. The framework is designed to analyze the human-in-the-loop text-based query and select the most suitable digital image for execution. The proposed multi-domain, multi-function digital twin framework reduces the computational effort by 5.15% when compared to a single, unified digital twin running all studies concurrently. Details on the development of the framework are provided, and experimental results validate the effectiveness of the proposed framework.
4 December 2020 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Current optimization methods for medium-frequency transformers (MFTs) within power electronic converters yield unrealistic results in the multiphysics framework. Comparing the optimal design to an experimental setup for a 3.5-kW MFT, the core loss is underestimated by 28%, which results in the experimental steady-state temperatures being 10 °C greater than the analytically optimized model. To counteract these disadvantages, an optimization procedure, using the aggressive space mapping (ASM) technique, is experimentally verified and compared with the previous state-of-the-art (SOA) method. It is shown that the ASM design produces more realistic and feasible experimental outcomes than the SOA design. The core losses are accurately predicted to within 10%, which, in turn, vastly improves the thermal modeling accuracy. The ASM method accurately predicts the core hot spot temperature and the average core temperature. This work also introduces a robust optimization method to the MFT design process to handle variations from both converter-level attributes and manufacturing tolerances to create a potential design region, which contains 97.725% of possible design outcomes. This method replaces the nominal design optimization that is used to produce the optimized MFTs in the SOA and ASM methods.
5 September 2019 in IEEE Power Electronics Magazine
Designing system-level converters can be complicated. The interweaved intricacies of modular converters to achieve higher voltages while maintaining stable controls and magnetics design must be considered. While there are many difficulties to overcome, the magnetics tend to be the most uncomfortable for power electronics engineers to define in the converter design process due to the lack of direct transition from design and simulation to final hardware outcomes.
12 January 2026 in IEEE Journal of Emerging and Selected Topics in Power Electronics
This paper presents the design, implementation, and experimental validation of a 1-MHz, 5-kW LLC resonant converter, establishing a benchmark for kilowatt-class power conversion at megahertz frequencies. A unified methodology is developed to minimize total losses in GaN devices and magnetic components through co-optimization of the resonant tank and a closed-form, time-domain model for dead-time estimation. This model accurately captures the nonlinear output-capacitance behavior of GaN switches, ensuring zero voltage switching while reducing conduction losses. To achieve high power density, integrated PCB-based magnetics are employed, yielding a compact 40 W/cm3 design. The integration approach and layout inherently limit loop area and parasitic coupling, which are factors known to influence radiated EMI. A predictive radiated-EMI model, derived from time-domain waveforms, is validated against hardware measurements, demonstrating strong correlation. The research efforts coalesce in the experimental demonstration of a 1-MHz, 5-kW power converter, which is the largest power transfer demonstrated at 1 MHz to date.
Megahertz switching frequencies in converters significantly reduce the size of passive components, enabling high power density. However, these frequencies also introduce operational challenges, such as the semiconductor device reliability, thermal management, magnetic design and electromagnetic interference. This paper discusses a dc-dc converter operating at 1 MHz and its associated design challenges. The relationship between a GaN device on-resistance, junction temperature and losses in scenarios where the converter operates beyond its nominal design specifications is analyzed. Additionally, a PCB-based inductor is fully characterized and the parasitic effects of PCB traces are examined for a 1-MHz, 1-kW application. Finally, the conducted and radiated emissions of the converter are addressed, supported by simulation and hardware experimental measurements.