There are many factors, which may affect on concrete quality. One of those is concrete curing. Self-curing concrete is the solution. It may produce by using chemical curing agents. The concept of those agents is to reduce the water evaporation from concrete. This research aims to study the effect of chemical curing agents on the behavior of self-curing concrete. Two different chemical curing agents were used to study the main mechanical properties of concrete. The main variables are; the type of curing agent (Polyethylene glycol "PEG400"–Poly Acrylamide "PAM") and its dosages. The results obtained in terms of compressive, tensile and flexure strength values. Test results showed that the self-curing concrete cured by each agent performed better in hardened properties compared to none cured concrete. Also, curing using the both agents together perform better than using each one individually.
Self-curing concrete SC is a concrete type that can be cured without using any external curing regimes. It can perform by several methods such as using lightweight aggregate or chemical agents. In this research chemical curing agent is used to produce SC. This paper reports the results of a research study conducted to evaluate the effect of sulfates on the performance of self-curing concrete compared to ordinary concrete. Samples are immersed in sodium sulfate Na2SO4 solution of 4% concentration. Results are measured in terms of compressive strength, tensile strength, flexural strength and mass loss. It was found that the rate of strength loss is noticed at ordinary concrete compared to SC concrete. Sulfate resistance is improved when using self-curing concrete. This improvement appears to be dependent on using a chemical curing agent.
2 April 2017 in Wood Material Science & Engineering
This research aims to study the feasibility of repair and strengthening of timber cantilever beams used in historic buildings. It is conducted to investigate the feasibility of using different valid materials and techniques to repair and strengthen timber cantilever beams in new and historic timber buildings. The study is performed in terms of structural performance as well as historic and architectural values. An experimental program of several different materials and techniques is executed. The results are driven in terms of initial cracking load, crack propagation for the tested samples at different loading stages, deflection values, and failure load for each repaired or strengthened material and technique. The main variables are timber types (new and historic), repair and strengthening materials (steel plates, Glass Fiber Reinforced Polymer wrap, and Carbon Fiber Reinforced Polymer laminates), repair or strengthening techniques (near surface mounted and externally bonded system), and cantilever length (1000 and 1250 mm). Test results indicated that using steel plates, glass fiber wrap, and carbon fiber laminates increases the value of failure loads and decreases the deflection at both; repaired and strengthened timber cantilever beams compared to control beams.
Various challenges encountered in the construction industry have led to the production of concrete, with not just high strength, but also with enhanced durability properties. This study investigates the performance and durability of hardened high strength concrete cast using Nano-silica, silica fume and fly ash. Experiments were conducted by substituting cement by weight with Nano-silica, silica fume or fly ash with ratios of 5 %, 10% and 15% and compared to a control mix. The durability performance of the high strength concrete, in terms of water permeability, sulfates resistance, chloride resistance and freeze-thawing tests were tested. This study generally proposes a sustainable solution to produce durable concrete that could have useful application in the construction industry. Based on the results obtained, the hardened properties of concrete improved depending on the type of supplementary cementious materials. Test results showed that Nano-silica has a great influence on concrete properties, but the high dosage show a reverse result.