Saw marks on bone have been routinely reported in dismemberment cases. When saw blade teeth contact bone and the bone is not completely sawed into two parts, bone fragments are removed forming a channel or kerf. Therefore, kerf width can approximate the thickness of the saw blade. The purpose of this study is to evaluate 100 saw kerf widths in bone produced by ten saw types to determine if a saw can be eliminated based on the kerf width. Five measurements were taken from each of the 100 saw kerfs to establish an average thickness for each kerf mark. Ten cuts were made on 10 sections of bovine bone, five with human-powered saws and five with mechanical-powered saws. The cuts were examined with a stereoscopic microscope utilizing digital camera measuring software. Two statistical cumulative logistic regression models were used to analyze the saw kerf data collected. In order to estimate the prediction error, repeated stratified cross-validation was applied in analyzing the kerf mark data. Based on the two statistical models used, 70–90% of the saws could be eliminated based on kerf width.
Coastal wetlands, crucial for global biodiversity and climate adaptation, provide essential ecosystem services such as carbon storage and flood protection. These vital areas are increasingly threatened by both natural and human-induced changes, prompting the need for advanced monitoring techniques. This study employs unmanned aerial systems (UASs) equipped with light detection and ranging (LiDAR) and multispectral sensors to survey diverse wetland types across 8 sites in North Carolina. Utilizing high-resolution elevation data and detailed vegetation analysis, coupled with sophisticated machine learning algorithms, we achieved differentiated and highly precise classifications of wetland types. Classification accuracies varied by type, with estuarine intertidal emergent wetlands showing the highest classification accuracies due to less complex vegetation structure and clearer spectral signatures, especially when collections account for tidal influence. In contrast, palustrine forested and scrub–shrub wetlands presented lower accuracies, often due to the denser, mixed, and more complex vegetation structure and variable inundation levels, which complicate spectral differentiation and ground returns from LiDAR sensors. Overall, our integrated UAS-derived LiDAR and multispectral approach not only enhances the accuracy of wetland mapping but also offers a scalable, efficient, and cost-effective method that substantially advances conservation efforts and informs policy-making for coastal resilience. By demonstrating the usefulness of small-scale aerial data collection in ecological mapping, this study highlights the transformative potential of merging advanced technologies in environmental monitoring, underscoring their critical role in sustaining natural habitats and aiding in climate change mitigation strategies.
18 April 2014 in Environmental and Ecological Statistics
Wetlands play a critical role in maintaining stable and productive ecosystems, and they continue to be at heightened risk from anthropogenic and natural degradation, especially along the rapidly developing Atlantic Coastal Plain of North America. As such, strategies to develop up-to-date and high-resolution wetland inventories and classifications remain highly relevant in the context of accelerating sea-level rise and coastal changes. Historically, satellite and airborne remote sensing data along with traditional field-based methods have been used for wetland delineation, yet, more recently, the advent of Uncrewed Aerial Systems (UAS) platforms and sensors is opening new avenues of performing rapid and accurate wetland classifications. To test the relative advantages and limitations of UAS technologies for wetland mapping and classification, we developed wetland classification models using UAS-collected multispectral and UAS-collected light detection and ranging (LiDAR) data relative to airborne-derived LiDAR models of wetland types ranging from palustrine to estuarine. The models were parameterized through a pixel-based random forest algorithm to evaluate model performance systematically and establish variable importance for a suite of variables including topographic, hydrologic, and vegetation-based indices. Based on our experimental results, the average overall classification accuracy and kappa coefficients for the UAS LiDAR-derived models are 75.29% and 0.74, respectively, compared to 79.80% and 0.75 for the airborne LiDAR-derived models, with significant differences in the spatial representation of final wetland classes. The resulting classification maps for the UAS models capture more precise wetland delineations than those of airborne models when trained with ground reference data collected at the same time as the UAS flights. The similar accuracy between the airborne and UAS models suggest that the UAS LiDAR is comparable to the airborne LiDAR. However, given poor revisit time of the airborne surveys and the high spatial resolution and precision of the UAS data, UAS-collected LiDAR provides excellent complementary data to statewide airborne missions or for specific applications that require hyperspatial data. For more structurally complex wetland types (such as the palustrine scrub shrub), UAS hyperspatial LiDAR data performs better and is much more advantageous to use in delineation and classification models. The results of this study contribute towards enhancing wetland delineation and classification models using data collected from multiple UAS platforms.
Objective: Active-duty military personnel in the current wars have experienced unique stressors that deviate from standard PTSD assessment and diagnosis. This situation calls for a refinement of military-related PTSD assessment. To this end, this study assessed the utility of the Trauma Symptom Inventory (TSI) in diagnosing PTSD among active-duty military personnel. The past literature has validated the TSI using populations with a small sample size. Hence, this study aimed to fill the gap by using a large sample size of 670 military members to examine whether the TSI is useful for military populations. Setting: Participants were referred to Carolina Psychological Health Services, in Jacksonville, North Carolina by military neurologists and other qualified medical officers from the Naval Hospital in Camp Lejeune, a military base located in Jacksonville, NC, for neuropsychological evaluation due to reported cognitive deficits related to military deployment (i.e., head injury due to exposure to blast injuries). Participants: Based on clinical diagnosis, comprehensive neuropsychological testing, and self-reported data, personnel were classified into four groups: blast exposure (n = 157), PTSD diagnosis (n = 90), both blast exposure and PTSD (n = 283), and neither blast exposure nor PTSD (n = 140), which helps provide a comprehensive picture of the utility of the TSI. Results: The TSI’s 10 clinical scales could distinguish between all groups. Discriminant function analysis showed that an optimally weighted combination of scales correctly predicted 66.67% of PTSD-positive cases and 35.11% of PTSD-negative cases. Conclusion: These findings provide support for the use of the TSI in the assessment of PTSD in active-duty military personnel. Due to the release of TSI-2, there is a need to replicate this data. However, the validity data has indicated a high concordance between the TSI and TSI-2, bolstering confidence in the current findings of the study.
4 June 2010 in Journal of Statistical Computation and Simulation
The Buckley–James estimator (BJE) is a widely recognized approach in dealing with right-censored linear regression models. There have been a lot of discussions in the literature on the estimation of the BJE as well as its asymptotic distribution. So far, no simulation has been done to directly estimate the asymptotic variance of the BJE. Kong and Yu [Asymptotic distributions of the Buckley–James estimator under nonstandard conditions, Statist. Sinica 17 (2007), pp. 341–360] studied the asymptotic distribution under discontinuous assumptions. Based on their methodology, we recalculate and correct some missing terms in the expression of the asymptotic variance in Theorem 2 of their work. We propose an estimator of the standard deviation of the BJE by using plug-in estimators. The estimator is shown to be consistent. The performance of the estimator is accessed through simulation studies under discrete underline distributions. We further extend our studies to several continuous underline distributions through simulation. The estimator is also applied to a real medical data set. The simulation results suggest that our estimation is a good approximation to the true standard deviation with reference to the empirical standard deviation.