The nanoscale properties of materials can have a great influence on their macroscopic behavior; for instance, the generation and accumulation of defects at the nanoscale, such as point defects, porosity, and interfaces, can change their thermal properties. In this work, we study the role of an interface in the thermal conductivity between two nanoparticles without any external load. We consider a system subjected to a temperature gradient perpendicular to the contact surface and study the thermal conductivity, thermal conductance, thermal resistance, and contact resistance vs nanoparticle size. The thermal resistance at the interface increases linearly with nanoparticles’ contact radius . A model based on the contact area between two nanoparticles allows us to reasonably explain the obtained numerical results for the thermal conductivity, leading to a net decrease in effective conductivity as the nanoparticle size increases, reasonably well described by a dependence. Simulated thermal conductance was found to be proportional to .
The thermal conductivity of nanostructures can be obtained using atomistic classical Molecular Dynamics (MD) simulations, particularly for semiconductors where there is no significant contribution from electrons to thermal conduction. In this work, we obtain and analyze the thermal conductivity of amorphous carbon (aC) nanowires (NW) with a 2 nm radius and aC nanotubes (NT) with 0.5, 1 and 1.3 nm internal radii and a 2 nm external radius. The behavior of thermal conductivity with internal radii, temperature and density (related to different levels of hybridization), is compared with experimental results from the literature. Reasonable agreement is found between our modeling results and the experiments for aC films. In addition, in our simulations, the bulk conductivity is lower than the NW conductivity, which in turn is lower than the NT conductivity. NTs thermal conductivity can be tailored as a function of the wall thickness, which surprisingly increases when the wall thickness decreases. While the vibrational density of states (VDOS) is similar for bulk, NW and NT, the elastic modulus is sensitive to the geometrical parameters, which can explain the enhanced thermal conductivity observed for the simulated nanostructures.
We study the effects of uniaxial pressure on the thermal conductivity between two nanoparticles using atomistic simulation. While the system is compressed, we analyze the evolution of contact area, the relative density, and the dislocation density. Lattice thermal conductivity is calculated by non-equilibrium molecular dynamics simulations at several stages of the compression. Despite the increment of dislocation defects, thermal conductivity increases with pressure due to the increase in relative density and contact radius. The behavior of the contact radius is compared with the Johnson–Kendall–Roberts (JKR) model. While there is good agreement at low strain, after significant plasticity, signaled by the emission of dislocations from the contact region, the discrepancy with JKR grows larger with the dislocation density. The results for thermal conductivity show good agreement with previous studies at zero strain, and a theoretical model is used to accurately explain its behavior vs strain-dependent contact radius. Both the Kapitza resistance and thermal resistance decrease with strain but with very different evolution. Simulations of a bulk sample under uniaxial strain were also carried out, allowing for a clear distinction between the role of compressive stress, which increases the conductivity, vs the role of dislocations, which decrease the conductivity. For the NP system, there is the additional role of contact area, which increases with stress and also modifies conductivity. An analytical model with a single free parameter allows for a description of all these effects and matches both our bulk and NP simulation results.
5 June 2026 in Journal of Materials Research and Technology