The accuracy of the power battery model and SOC estimation directly affects the vehicle energy management control strategy and the performance of the electric vehicle, which is of great significance to the efficient management of the battery and the improvement of the reliability of the vehicle. Based on the research of domestic and foreign battery models and the previous results of SOC estimation, this paper classifies power battery models into electrochemical mechanism models, equivalent circuit models and data-driven models. This paper analyzes the advantages and disadvantages of various battery models and current research progress. According to the choice of battery model, the previous research results of the power battery SOC estimation method are divided into three categories: the direct measurement method not based on battery model, the estimation method using black box battery model, and the battery model SOC estimation method based on state space. This paper will summarize and analyze the principles, applicable scenarios and research progress of the three categories of estimation algorithms aiming to provide references for future in-depth research. Finally, in view of the shortcomings of the battery model and estimation algorithm of the existing method, the future improvement direction is proposed.
Scientifically and accurately predicting the state of health (SOH) and remaining useful life (RUL) of batteries is the key technology of automotive battery management systems. The selection of the health indicator (HI) that characterizes battery aging affects the accuracy of the prediction model construction, which in turn affects the accuracy of SOH and RUL estimation. Therefore, this paper analyzes the current status of HI selection for lithium-ion batteries by systematically reviewing the existing literature on the selection of HIs. According to the relationship between HI and battery aging, battery HI can be divided into two categories: direct HI and indirect HI. The capacity and internal resistance of the battery can directly represent the aging degree of the battery and are the direct HIs of the battery. Indirect HIs refer to characteristic parameters extracted from battery charge and discharge data that can characterize the degree of battery aging. This paper analyzes and summarizes the advantages and disadvantages of various HIs and indirect HIs commonly used in current research, providing useful support and reference for future researchers in selecting HIs to characterize battery aging. Finally, in view of the capacity regeneration phenomenon in the aging process of the battery, the selection direction of future HI is proposed.
In order to meet the safety requirements of automobile braking, to improve the braking energy recovery rate of pure electric buses and increase their driving range, the maximum regenerative braking force that the motor can provide is used to determine the front and rear wheel friction braking force distribution curve. A parallel regenerative braking control strategy, A, is proposed to make full use of the motor performance. Aiming at the problems of low power density and short cycle life with a single power battery, a composite energy system composed of power batteries and supercapacitors is designed, and an alternative energy control strategy, D, using real-time wavelet transform control is proposed. The required power is decomposed into high-frequency components and low-frequency components by using the wavelet transform control, in which the high-frequency power is borne by the supercapacitor to avoid impact on the power battery. The simulation model was created using MATLAB/Simulink software, and the simulation was carried out under combined cycle conditions to verify the effectiveness of the control strategy. The simulation results showed that compared with the original vehicle control strategy, adopting the A regenerative braking control strategy can reduce the battery SOC drop by 5.15%, increase the relative increase by 47.9%, and improve the braking energy recovery rate. Compared with the traditional logic threshold regenerative braking control strategy, AC, the AD control strategy can effectively reduce the impact of the peak current and high-frequency demands of the power battery on the battery. The maximum output current of the battery was reduced by 39.5%. The decrease in battery SOC decreased by 0.69%, and the relative increase increased by 12.43%. The driving range and braking performance of the vehicle have thus been effectively improved.