Applying fin stabilizers is an effective solution for ship rolls on waves in a seaway. They generally consist of one or two pairs of retractable fins that are symmetrically mounted to both sides of the ship, effectively reducing the roll motion at low or moderate speeds. Fin stabilizers are commonly used by cruise ships for the comfort and safety of passengers. However, there is still little experimental and numerical analysis of the fins’ effect on hydrodynamic performance. In this study, the resistance performance of a cruise ship was investigated with/without fin stabilizers at different fin angles and ship velocities by model tests and numerical analysis. The CFD analysis provides a flow-detailed interpretation of the physical phenomenon, especially at an asymmetric maximum fin angle. The significant fin-induced resistance is newly discovered and averages up to 19% in calm water conditions, while the added resistance in waves is evaluated with a smaller increment up to 1.31%. By comparing the numerical and experimental results, this study provides insight into the resistance induced by overhanging fins, which provides an accurate prediction reference for cruise ship performance and benefits the fin stabilizers’ design and selection.
Trailing suction hopper dredgers (TSHDs) are characterized by their bulky hull forms. Traditional mathematical models based on Taylor series expansions lack sufficient predictive accuracy when estimating the hydrodynamic forces and maneuvering responses of such large vessels under highly nonlinear operating conditions, primarily due to the ambiguous physical interpretation of higher-order terms. To address this issue, this paper proposes a physics-informed neural network (PINN) hydrodynamic identification method that incorporates the cross-flow drag mechanism. A hybrid hydrodynamic model architecture combining linear potential flow with nonlinear cross-flow effects is developed. For longitudinal resistance, a polynomial model consistent with physical symmetry is retained; for lateral force and yaw moment, a cross-flow integral model based on strip theory is introduced. Utilizing a PINN network structure, the draft distribution function H(x) of the model ship’s hull geometry is explicitly embedded within the physical computation layer. Experimental data from large-amplitude oscillation tests conducted using a planar motion mechanism (PMM) were successfully employed to invert the cross-flow drag coefficient distribution along the ship’s length. The proposed model significantly enhances generalization ability and physical interpretability for large-amplitude roll and yaw motions, thereby providing a more reliable and physically consistent framework for predicting TSHD maneuvering behavior in complex sea conditions.
A fin stabilizer is one of the most effective and frequently used anti-roll devices for maintaining a ship’s operational safety and passengers’ comfort. However, the discrepancy between theoretical hydrofoil-based predictions and the actual dynamic lift force of fin stabilizers due to fin–hull interactions requires more research attention. This study investigates the effect of fin stabilizers on mitigating roll motion through the performance of extensive computational fluid dynamic (CFD) simulations over a range of fin angles and ship speeds. Model tests were carried out to validate the drag and motion results obtained from numerical analyses. The results show that fin stabilizers significantly reduce the roll motion, with the lift coefficient values influenced by the Reynolds number, leading to differences between the theoretical and Reynolds-averaged Navier–Stokes (RANS) calculations. At a high Froude number (Fr), the actual fin lift is about half of the theoretical value. These findings highlight the requirement of selecting an adequate fin area at the predominant ship speeds and ensuring an effective anti-roll effect with fin–hull interaction. This study provides a significant reference for ship design, as well as stabilization system control and optimization.