The mining industry confronts significant challenges in mitigating airborne particulate matter (PM) pollution, necessitating innovative approaches for effective monitoring and prediction. This research focuses on the design and development of an Internet of Things (IoT)-based real-time monitoring system tailored for PM pollutants in surface mines, specifically PM 1.0, PM 2.5, PM 4.0, and PM 10.0. The novelty of this work lies in the integration of IoT technology for real-time measurement and the application of machine learning (ML) techniques for accurate prediction based on recorded dust pollutants data. The study's findings indicate that PM 1.0 pollutants exhibited the highest concentration in the atmosphere of the ball clay surface mine sites, with the stockyard site registering the maximum levels of PM pollutants (28.45 µg/m3, 27.89 µg/m3, 26.17 µg/m3, and 27.24 µg/m3, respectively) due to the dry nature of clay materials. Additionally, the research establishes four ML models—Decision Tree (DT), Gradient Boosting Regression (GBR), Random Forest (RF), and Linear Regression (LR)—for predicting PM pollutant concentrations. Notably, Random Forest demonstrates superior performance with the lowest Mean Absolute Error (MAE) and Root Mean Squared Error (RMSE) at 1.079 and 1.497, respectively. This comprehensive solution, combining IoT-based monitoring and ML-based prediction, contributes to sustainable mining practices, safeguarding worker well-being, and preserving the environment.
The green energy also called the renewable energy, has gained much attention nowadays. Among the renewable energy solutions, solar energy is the very vital source that can be used to generate power. Electricity from the sun can be converted through photovoltaic (PV) module. The efficiency of solar module depends on sun intensity, if the intensity is more then efficiency is more. Since the position of sun continuously changes throughout the day, the intensity of sun rays is not uniform on PV module. So, for getting more sun rays on PV module solar tracker plays a much vital role. A solar tracker is a device for operating a solar photovoltaic panel, especially in solar cell applications and requires high degree of accuracy to ensure that the concentrated sunlight is dedicated precisely on to the power device. This paper describes in detail about the design, development and fabrication of two Prototype Solar Tracking Systems mounted with a single-axis and dual-axis solar tracking controllers to generate 10.3 volts, 1.5 watts capable of charging mobile batteries. The rays from the sun should fall perpendicularly onto the solar panels to maximize the capture of the rays and this is done by pointing the solar panels towards the sun and following its path across the sky. The solar tracking systems - Tilted Single Axis Tracker (TSAT) and Azimuth-Altitude Dual Axis Tracker (AADAT) are designed, implemented and experimentally tested. The design details of TSAT and AADAT are described which detect the sunlight using Light Dependent Resistor (LDR) sensors. The control circuit for the systems is based on Atmega8 Microcontroller which is programmed to detect the sunlight through the LDR sensors and then actuate the DC geared motor using L293D motor driver to position the solar panel where it can receive the maximum sunlight.
In this paper, the impact of dust deposition on solar photovoltaic (PV) panels was examined, using experimental and machine learning (ML) approaches for different sizes of dust pollutants. The experimental investigation was performed using five different sizes of dust pollutants with a deposition density of 33.48 g/m2 on the panel surface. It has been noted that the zero-resistance current of the PV panel is reduced by up to 49.01% due to the presence of small-size particles and 15.68% for large-size (ranging from 600 µ to 850 µ). In addition, a significant reduction of nearly 40% in sunlight penetration into the PV panel surface was observed due to the deposition of a smaller size of dust pollutants compared to the larger size. Subsequently, different ML regression models, namely support vector machine (SVMR), multiple linear (MLR) and Gaussian (GR), were considered and compared to predict the output power of solar PV panels under the varied size of dust deposition. The outcomes of the ML approach showed that the SVMR algorithms provide optimal performance with MAE, MSE and R2 values of 0.1589, 0.0328 and 0.9919, respectively; while GR had the worst performance. The predicted output power values are in good agreement with the experimental values, showing that the proposed ML approaches are suitable for predicting the output power in any harsh and dusty environment.
20 October 2017 in International Journal of Ambient Energy
The performance of PV panel depends on the incoming sunlight on its surface. The accumulated airborne dust particles on panel surface creates a barrier in the path of sunlight and panel surface, which significantly reduces the amount of solar radiation falling on the panel surface. The present study shows a significant reduction in short circuit current and power output of PV panel due to dust deposition on its surface, whereas the reduction in open circuit voltage is not much prominent. This study has been carried in the field as well as in the laboratory. The reduction in maximum power output of PV panel for both the studies ensures a linear relation with the dust deposition on its surface. In the field study, the reduction in the power output due to 12.86gm of dust deposition on the panel surface was 43.18%, whereas in the laboratory study it was 44.75% due to 11gm of dust depositionArticle History: Received July 10th 2017; Received in revised form Sept 15th 2017x; Accepted 1st Oct 2017; Available onlineHow to Cite This Article: Tripathi, A.K., Aruna, M. and Murthy, Ch.,S.N. (2017). Performance Evaluation of PV Panel Under Dusty Condition. International Journal of Renewable Energy Develeopment, 6(3), 225-233.https://doi.org/10.14710/ijred.6.3.225-233