Haiyang-2 (HY-2) missions have accumulated sea surface height (SSH) observations on a global scale for more than 10 years. Four satellites, HY-2A, HY-2B, HY-2C and HY-2D, provide even but differently distributed data, which play a complementary role in marine gravity studies with other missions. Therefore, this paper evaluates the performances of HY-2 altimetric data in marine gravity modeling from the following four perspectives: SSH accuracy, geoid signal resolution ability, vertical deflections and gravity anomaly. First, the centimeter-magnitude accuracy level of HY-2 data is proved by analyzing SSH discrepancies at crossover points within a certain time limit. Second, the spectral analysis of repetitive along-track data sequences in a time domain shows a geoid resolution range from 18 to 24 km. Taking HY-2 exact repeat missions (ERM), for example, the resolution could be remarkably enhanced by stacking repetitive cycles. Third, validation with an XGM2019 model showed that vertical deflections were reliably computed for all HY-2 missions, but HY-2A performed slightly worse than the other HY-2 missions. Meanwhile, HY-2C and HY-2D with a ~66° orbital inclination obviously had an improved ability to capture east–west signals compared to HY-2A and HY-2B. Finally, we constructed global marine gravity results based on three input datasets, HY-2 dataset only, multi-satellite dataset without HY-2 and multi-satellite dataset with HY-2. Validations were performed using published models and shipborne gravimetric data. The results showed that the HY-2 dataset is capable of improving marine gravity anomaly recoveries and that the accuracy of NSOAS22 with incorporated HY-2 data is comparable to DTU21 and SS V31.1. Furthermore, HY-2 observations should not be the only input dataset to construct a 1’ × 1’ resolution marine gravity model.

The primary contribution of this study lies in analyzing the dynamic drivers during two anomalous sea level rise events in the Bohai Sea through coupled numeric modeling using the Weather Research and Forecasting (WRF) model and the Finite-Volume Community Ocean Model (FVCOM) integrated with the Simulating Waves Nearshore (SWAN) module (hereafter referred to as FVCOM-SWAVE). WRF-derived wind speeds (0.05° grid resolution) were validated against Haiyang-2 (HY-2) scatterometer observations, yielding a root mean square error (RMSE) of 1.88 m/s and a correlation coefficient (Cor) of 0.85. Similarly, comparisons of significant wave height (SWH) simulated by FVCOM-SWAVE (0.05° triangular mesh) with HY-2 altimeter data showed an RMSE of 0.67 m and a Cor of 0.84. Four FVCOM sensitivity experiments were conducted to assess drivers of sea level rise, validated against tide gauge observations. The results identified tides as the primary driver of sea level rise, with wind stress and elevation forcing (e.g., storm surge) amplifying variability, while currents exhibited negligible influence. During the two events, i.e., 20–21 October and 25–26 August 2024, elevation forcing contributed to localized sea level rises of 0.6 m in the northern and southern Bohai Sea and 1.1 m in the southern Bohai Sea. A 1 m surge in the northern region correlated with intense Yellow Sea winds (20 m/s) and waves (5 m SWH), which drove water masses into the Bohai Sea. Stokes transport (wave-driven circulation) significantly amplified water levels during the 21 October and 26 August peak, underscoring critical wave–tide interactions. This study highlights the necessity of incorporating tides, wind, elevation forcing, and wave effects into coastal hydrodynamic models to improve predictions of extreme sea level rise events. In contrast, the role of imposed boundary current can be marginalized in such scenarios.