Dynamic response analysis and fatigue damage assessment of floating offshore wind turbine (FOWT) structures are carried out in this paper with a focus on the statistical characteristics of the dynamic responses under wind–wave excitation. A proper spectral fatigue damage model is proposed to obtain better fatigue damage estimation. The OC3 floating spar (Hywind) with a 5 MW baseline wind turbine developed by the American National Renewable Energy Laboratory (NREL) is applied as the target model, and the fully coupled dynamic responses of the model are calculated in the time domain. The non-Gaussian nature is revealed based on the study of the statistical properties of the dynamic response of key components (the tower base and fairlead of the mooring line). Dirlik distribution is proved to be the best probability distribution function (PDF) that can fit the statistical distribution feature of the dynamic responses among several PDFs. The corresponding spectral fatigue damage models are applied to estimate fatigue damage of the tower base and mooring line following the proposed fatigue assessment procedure in the frequency domain, of which the results are compared with results from the time-domain analysis method. The results indicate that for non-Gaussian feature dynamic responses as FOWTs, the spectral fatigue damage model based on the Dirlik distribution can provide more accurate assessments of fatigue damage.
Hinged multi-body systems are gaining popularity in the field of ocean engineering. Their performance is commonly evaluated using numerical simulations, but comparisons with experimental data are required to ensure the accuracy of the computational tools. However, there is a dearth of experimental studies on the motion performance of hinged multi-body systems, particularly those involving more than two hinged floating bodies. This study aims to fill this gap in experimental data for hinged multi-body systems beyond two bodies. The rectangular box was chosen as the test model due to its stable hydrodynamic properties and ease of numerical modelling. Five identical boxes were prefabricated and subsequently tested in the pool in a sequence ranging from one to five boxes to capture the motion performance. Additionally, a numerical programme based on potential flow theory was developed for mutual validation with the experimental data. Firstly, the physical properties of each box were determined through equations calculation and a free decay test, enabling the acquisition of all parameters for conducting numerical simulations. Then, the response amplitude operator (RAO) curves for the heave and pitch motion of a single box were depicted, and the results indicated that the resonant frequency in pitch direction obtained from the regular wave test was consistent with that obtained from the free decay test. Finally, the motion RAO curves of hinged multi-body systems were presented and analysed. The agreement between the measured and computed results confirms the suitability of the experimental data presented in this study as benchmark data for validating numerical simulations.
Fatigue failure caused by frequent tension and bending loads is a crucial safety concern for mooring chains used on floating structures in the oil and gas industry. The bending effect for a chain’s fatigue is usually not considered by existing fatigue analysis methods, and even if it is considered, existing commercial software can only calculate the constant interlink bending stiffness without consideration of the stiffness variations due to tension and friction. To address this issue, this study develops an in-plane bending (IPB)/out-of-plane bending (OPB) fatigue assessment approach for offshore mooring chains considering the time-varying nonlinear interlink bending stiffness. Initially, the mooring tension and IPB/OPB angles are calculated by an in-house code MeCAP (multi-element coupled analysis program), considering the time-varying interlink stiffness between the chain links. The fatigue life of mooring chains for pure tension–tension (TT) and OPB combined fatigue at different hotspot locations (A, B, and C) is calculated by MeCAP-fatigue, a newly-developed module in MeCAP. Based on the analysis model, a comparative study is implemented to investigate the effects of interlink stiffness on fatigue damage. The differences and advantages of the combined fatigue calculation method over the pure TT fatigue assessment method are discussed. The results illustrate that combined fatigue would be underestimated significantly if zero interlink stiffness (hinge joint assumption) is applied or even constant interlink stiffness (calculated by mooring pretension), while pure TT fatigue will be largely unaffected. Moreover, compared to pure TT fatigue, the OPB combined fatigue assessment method, considering the effects of OPB/IPB and the time-varying properties of the connection between chain links, could evaluate fatigue life more comprehensively.
Dynamic systems characterized by second-order nonlinear ordinary differential equations appear in many fields of physics and engineering. To solve these kinds of problems, time-consuming step-by-step numerical integration methods and convolution methods based on Volterra series in the time domain have been widely used. In contrast, this work develops an efficient generalized pole-residue method based on the Volterra series performed in the Laplace domain. The proposed method involves two steps: (1) the Volterra kernels are decoupled in terms of Laguerre polynomials, and (2) the partial response related to a single Laguerre polynomial is obtained analytically in terms of the pole-residue method. Compared to the traditional pole-residue method for a linear system, one of the novelties of the pole-residue method in this paper is how to deal with the higher-order poles and their corresponding coefficients. Because the proposed method derives an explicit, continuous response function of time, it is much more efficient than traditional numerical methods. Unlike the traditional Laplace domain method, the proposed method is applicable to arbitrary irregular excitations. Because the natural response, forced response and cross response are naturally obtained in the solution procedure, meaningful mathematical and physical insights are gained. In numerical studies, systems with a known equation of motion and an unknown equation of motion are investigated. For each system, regular excitations and complex irregular excitations with different parameters are studied. Numerical studies validate the good accuracy and high efficiency of the proposed method by comparing it with the fourth-order Runge--Kutta method.
Mooring systems are critical to deepwater floating platforms, ensuring their safe operation under harsh marine environmental conditions. Mooring-line failure can disrupt load redistribution, alter platform dynamic response, and compromise operational safety. Conventional monitoring methods based on maximum mooring tension and tension responses often fail to distinguish environmental load variations from structural abnormalities. This study proposed a health-monitoring approach using Volterra kernel energies extracted from mooring tension responses. A second-order truncated Volterra model with a self-excitation modeling strategy was employed to derive first- and second-order Volterra kernel energies, which were used to construct health monitoring indicators. The performance of these indicators was assessed using a semi-submersible floating platform equipped with a carbon fiber-reinforced polymer (CFRP) mooring system. Furthermore, the effects of sensor location, segment duration, and random seed on monitoring performance were investigated. The results indicated that the first-order Volterra kernel energy was highly sensitive to environmental load variations, whereas the second-order kernel energy effectively captured nonlinear dynamic characteristics associated with mooring-line failure. By integrating these complementary features, the proposed approach can effectively distinguish environmental load variations from structural abnormalities under complex marine environmental conditions. These findings provide a methodological basis for the health-state assessment and integrity management of deepwater mooring systems.