Markus B. Wilms

Mr. Markus B. Wilms

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 June 2022 in Progress in Additive Manufacturing
Verified
Journal Article
Open access
PDF file
MWMarkus B. Wilms
Markus B. Wilms
NPNorbert Pirch
Norbert Pirch
BGBilal Gökce
Bilal Gökce
In this work, we demonstrate the feasibility of manufacturing an iron-based oxide-dispersion-strengthened (ODS) PM2000 composite material with the chemical composition of Fe20Cr4.5Al0.5Ti + 0.5Y2O3 (in wt.%) via the advanced directed energy deposition (DED) process of high-speed laser cladding (HSLC). The characteristic high solidification rates of HSLC processes allow the successful dispersion of nano-scaled yttrium-based oxides in the ferritic stainless steel matrix. The effective suppression of nano-particle agglomeration during the melting stage, which is frequently observed in conventional DED processes of ODS materials, is reflected by smaller dispersoid sizes and corresponding higher hardness of manufactured specimen compared to DED-manufactured counterparts.

28 November 2022 in International Journal of Heat and Mass Transfer
Verified
Journal Article
Closed access
ASAmit Kumar Singh
Amit Kumar Singh
YMYasham Mundada
Yasham Mundada
PBPriyanshu Bajaj
Priyanshu Bajaj
MWMarkus B. Wilms
Markus B. Wilms
JPJeet Patil
Jeet Patil
AAAmit Arora
Amit Arora

Verified
Journal Article
Open access
PDF file
MWMarkus B. Wilms
Markus B. Wilms
SRSilja-Katharina Rittinghaus
Silja-Katharina Rittinghaus
Copper is a key material for cooling of thermally stressed components in modern aerospace propulsion systems, due to its high thermal conductivity. The use of copper materials for such applications requires both high material strength and high stability at high temperatures, which can be achieved by the concept of oxide dispersion strengthening. In the present work, we demonstrate the oxide reinforcement of two highly conductive precipitation-strengthened Cu-Cr-Nb alloys using laser additive manufacturing. Gas-atomized Cu-3.3Cr-0.5Nb and Cu-3.3Cr-1.5Nb (wt.%) powder materials are decorated with Y2O3 nanoparticles by mechanical alloying in a planetary mill and followed by consolidation by the laser additive manufacturing process of laser powder bed fusion (L-PBF). While dense specimens (>99.5%) of reinforced and nonreinforced alloys can be manufactured, oxide dispersion-strengthened alloys additionally exhibit homogeneously distributed oxide nanoparticles enriched in yttrium and chromium next to Cr2Nb precipitates present in all alloys examined. Higher niobium contents result in moderate increase of the Vickers hardness of approx. 10 HV0.3, while the homogeneously dispersed nanometer-sized oxide particles lead to a pronounced increase of approx. 30 HV0.3 in material strength compared to their nonreinforced counterparts.

1 December 2021 in International Journal of Refractory Metals and Hard Materials
Verified
Journal Article
Closed access
JSJanett Schmelzer
Janett Schmelzer
SRSilja-Katharina Rittinghaus
Silja-Katharina Rittinghaus
MWMarkus B. Wilms
Markus B. Wilms
OMOliver Michael
Oliver Michael
MKManja Krüger
Manja Krüger

18 July 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
TFTorsten Fischer
Torsten Fischer
BKBernd Kuhn
Bernd Kuhn
XFXiuru Fan
Xiuru Fan
MWMarkus B. Wilms
Markus B. Wilms
In the present study, the first tailored steel based on HiperFer (high-performance ferrite) was developed specifically for the additive manufacturing process. This steel demonstrates its full performance potential when produced via additive manufacturing, e.g., through a high cooling rate, an in-build heat treatment, a tailored microstructure and counteracts potential process-induced defects (e.g. pores and cavities) via “active” crack-inhibiting mechanisms, such as thermomechanically induced precipitation of intermetallic (Fe,Cr,Si)2(W,Nb) Laves phase particles. Two governing mechanisms can be used to accomplish this: (I) “in-build heat treatment” by utilizing the “temper bead effect” during additive manufacturing and (II) “dynamic strengthening” under cyclic, plastic deformation at high temperature. To achieve this, the first HiperFerAM (additive manufacturing) model alloy with high precipitation kinetics was developed. Initial mechanical tests indicated great potential in terms of the tensile strength, elongation at rupture and minimum creep rate. During the thermomechanical loading, global sub-grain formation occurred in the HiperFerAM, which refined the grain structure and allowed for higher plastic deformation, and consequently, increased the elongation at rupture. The additive manufacturing process also enabled the reduction of grain size to a region, which has not been accessible by conventional processing routes (casting, rolling, heat treatment) so far.