The polarization states of a skylight can be used for navigation by a lot of insects as well as by human beings. However, the polarization patterns of skylight are greatly influenced by the atmospheric conditions. This paper studied the polarization patterns of skylight under different sky conditions by polarized imaging measurements, in which the AOT (Aerosol Optical Thickness) and clouds were taken into account. The results showed that both the aerosol and cloud disturbed the polarization patterns of the skylight, but the patterns of AOP (Angle of Polarization) showed great robustness. The symmetry of the AOP images was found to be quite steady under most of the sky conditions. We proposed a navigation method by finding out the solar meridian according to the symmetry of an AOP map. The results showed that the solar meridian can be identified accurately under different situations. The calculation errors slightly fluctuated along with the aerosol and cloud.
6 January 2021 in International Journal of Computer Vision
We present parallel single-pixel imaging (PSI), a photography technique that captures light transport coefficients and enables the separation of direct and global illumination, to achieve 3D shape reconstruction under strong global illumination. PSI is achieved by extending single-pixel imaging (SI) to modern digital cameras. Each pixel on an imaging sensor is considered an independent unit that can obtain an image using the SI technique. The obtained images characterize the light transport behavior between pixels on the projector and the camera. However, the required number of SI illumination patterns generally becomes unacceptably large in practical situations. We introduce local region extension (LRE) method to accelerate the data acquisition of PSI. LRE perceives that the visible region of each camera pixel accounts for a local region. Thus, the number of detected unknowns is determined by local region area, which is extremely beneficial in terms of data acquisition efficiency. PSI possesses several properties and advantages. For instance, PSI captures the complete light transport coefficients between the projector–camera pair, without making specific assumptions on measured objects and without requiring special hardware and restrictions on the arrangement of the projector–camera pair. The perfect reconstruction property of LRE can be proven mathematically. The acquisition and reconstruction stages are straightforward and easy to implement in the existing projector–camera systems. These properties and advantages make PSI a general and sound theoretical model to decompose direct and global illuminations and perform 3D shape reconstruction under global illumination.
The hyperspectral data and 3D structural data are highly useful in botanical research. But, the two types of information are often acquired separately and hard to be combined. In this work, a novel dual-path configuration based on acousto-optical tunable filter (AOTF) is proposed to acquire an image, structural and hyperspectral information within one acquisition process by a combination of laser triangulation. Under the configuration, the hyperspectral data and the 3D structure can be matched to subpixel level after geometrical calibration. Finally, the obtainment of 3D hyperspectral information in field experiment verifies the feasibility of this imaging system.
Optical 3D shape measurements, such as fringe projection profilometry (FPP), are popular methods for recovering the surfaces of an object. However, traditional FPP cannot be applied to measure regions that contain strong interreflections, resulting in failure in 3D shape measurement. In this study, a method based on single-pixel imaging (SI) is proposed to measure 3D shapes in the presence of interreflections. SI is utilized to separate direct illumination from indirect illumination. Then, the corresponding points between the pixels of a camera and a projector can be obtained through the direct illumination. The 3D shapes of regions with strong interreflections can be reconstructed with the obtained corresponding points based on triangulation. Experimental results demonstrate that the proposed method can be used to separate direct and indirect illumination and measure 3D objects with interreflections.
Point spread function (PSF) is important for evaluating an optical system and image deblurring. In this paper, we proposed a method to measure space-variant PSF at any depth based on single-pixel imaging (SPI), and we initiated a depth-variant PSF interpolation model. In our method, we regarded space-variant PSF as light transport coefficients from object points to image pixels. By applying SPI to each image pixel to obtain these light transport coefficients at different depths, the PSF of each object point can be extracted. The depth calculation of PSF is based on multi-frequency heterodyne phase-shifting principles and perspective-n-point (PnP) algorithm. In our PSF interpolation model, we interpolated the light transport coefficients from different object points to an image pixel first. We then obtained the interpolated PSF indirectly from the interpolated coefficients. With simple experimental facilities containing a digital camera and a liquid crystal display (LCD) screen to display and capture specific patterns, which relative distance is changed, the proposed method accurately obtained the space-variant PSF at any depth. Without complicated calculation, PSF at a certain depth can be interpolated from the PSF measured data at another depth with our PSF interpolation method. Significant similarities exist between the interpolated PSF and directly measured PSF. Our work is a successful attempt in using SPI to solve traditional optical problems.
Riveted workpieces are widely used in manufacturing; however, current inspection sensors are mainly limited in nondestructive testing and obtaining the high-accuracy dimension automatically is difficult. We developed a 3-D sensor for rivet inspection using fringe projection profilometry (FPP) with texture constraint. We used multi-intensity high dynamic range (HDR) FPP method to address the varying reflectance of the metal surface then utilized an additional constraint calculated from the fused HDR texture to compensate for the artifacts caused by phase mixture around the stepwise edge. By combining the 2-D contours and 3-D FPP data, rivets can be easily segmented, and the edge points can be further refined for diameter measurement. We tested the performance on a sample of riveted aluminum frame and evaluated the accuracy using standard objects. Experiments show that denser 3-D data of a riveted metal workpiece can be acquired with high accuracy. Compared with the traditional FPP method, the diameter measurement accuracy can be improved by 50%.