The modified aloe polysaccharide (MAP) juice developed under optimized condition was investigated to assess the effect of foaming process parameters and its optimization followed by evaluating the best drying conditions for developing MAP powder from foamed and non‐foamed MAP juice. The foaming process parameters selected for optimizing the condition for MAP juice were soy protein isolate (SPI%), carboxymethyl cellulose (CMC%), and whipping time (WT) with variation in experimental range of 3–7%, 0.1–0.5%, and 1–5 min, respectively. The optimal foaming conditions obtained for MAP juice were 6.905% SPI, 0.412% CMC, and 4.861 WT with a desirability of 0.885. The optimized foamed MAP juice were dried at varying temperature (50, 60, and 70°C) and different foam thickness (FT; 1, 3, and 5 mm) to compare with nonfoamed fresh aloe powder developed under the same drying condition. The developed foamed MAP powder dried at 60°C drying temperature and 3 mm FT retained significantly higher functional attributes than nonfoamed aloe powder. The yield, bulk density, colour change and polysaccharide content of the foamed MAP powder were higher significant effect, whereas TSS, solubility, firmness, flowability and overall acceptability were non‐significant differences to nonfoamed powder.
This study investigated the effects of pulsed electric field (PEF) parameters, including pulse intensity (25–35 kV/cm), pulse width (50–200 µs), and pulse stop time (50–100 ms), on the structural and functional properties of rice protein. Using response surface methodology (RSM), the optimal PEF conditions were identified as 35 kV/cm pulse intensity, 197.226 µs pulse width, and 59.675 ms pulse stop time. Under these conditions, the PEF-treated sample was compared with an untreated control to assess structural and functional modifications. PEF treatment disrupted the secondary (FTIR) and tertiary (UV-Vis, fluorescence) protein structures, leading to the exposure of hydrophobic groups and enhancing protein flexibility (36.04 to 52.575%) and surface hydrophobicity (24.39 ± 0.47 to 27.45 ± 0.37). Total (6.453 to 7.525 µmol/g) and exposed sulfhydryl content (3.752 to 6.511 µmol/g) increased significantly (p < 0.05), while disulfide bonds decreased (34.828 to 22.626 µmol/g). A slight increase in non-protein nitrogen (5.66 to 6.71 µg/mL) content was also observed. Functional properties, including protein digestibility (9.2%), DPPH assay (20.34%), and emulsification, were significantly improved (p < 0.05) compared to the control. These results demonstrate that PEF treatment effectively modifies rice protein’s structure and enhances its functional properties for potential applications in functional foods. Graphical Abstract The alternative text for this image may have been generated using AI.