The tracked-wheeled mobile robot has gained significant attention in military, agricultural, construction, and other fields due to its exceptional mobility and off-road capabilities. Therefore, it is an ideal choice for reconnaissance and exploration tasks. In this study, we proposed a multi-jointed tracked-wheeled compound mobile robot that can overcome various terrains and obstacles. Based on the characteristics of multi-jointed robots, we designed two locomotion modes for the robot to climb stairs and established the kinematics/dynamics equations for its land movement. We evaluated the robot’s stability during slope climbing, its static stability during stair climbing, and its ability to cross trenches. Based on our evaluation results, we determined the key conditions for the robot to overcome obstacles, the maximum height it can climb stairs, and the maximum width it can cross trenches. Additionally, we developed a simulation model to verify the robot’s performance in different terrains and the reliability of its stair-climbing gait. The simulation results demonstrate that our multi-jointed tracked-wheeled compound mobile robot exhibits excellent reliability and adaptability in complex terrain, indicating broad application prospects in various fields and space missions.
End effectors like firearms, cameras and fire water guns can be classified as pointing end effectors. When installed on wearable manipulators, a new function can be given to the wearer. Different from gripper end effectors (GEEs), target pointing end effectors (TPEEs) have different working tasks, and the requirements for path planning are also different. There is very limited research on wearable manipulators with TPEEs. Meanwhile, manipulator with GEE path planning tends to be mature, but with a relatively low efficiency concerning its algorithm in solving high-dimensional problems. In this paper, a degree of freedom (DOF) allocation scheme and a path planning strategy (unlike manipulator with gripper end effector) were proposed for manipulators with a target pointing end effector in order to reduce the difficulty of path planning. Besides, this paper describes a new algorithm-dimension rapid-exploration random tree (dimension-RRT) to divide the manipulator DOFs into groups and unify DOFs groups by adding a fake time. The dimension-RRT was compared with the rapid-exploration random tree star algorithm (RRT*) in the same simulation environment; when there are 500 random points, the dimension-RRT time consumption is 0.556 of RRT* and the path length is 0.5 of RRT *. To quickly obtain a path that can avoid the human body, dynamic movement primitives (DMPs) were used to simulate typical spatial motion path and obstacle avoidance path efficiently.
1 January 2025 in International Journal of Intelligent Systems
The two‐degree‐of‐freedom rotation stage serves as a crucial component in ground unmanned platforms, and its servo performance is pivotal to the platform’s overall functionality. To enhance the servo performance of the two‐degree‐of‐freedom rotation stage, we proposed a novel adaptive control approach: SSA–GA optimization of RBFNN integration into PID control. This method leverages the SSA–GA algorithm to optimize the parameters within the RBFNN, which is then seamlessly integrated into the PID control framework. This integration enables precise control of the two‐degree‐of‐freedom rotation stage, overcoming the limitations of traditional PID controllers. By simulating various real‐world situations such as step, noise, sinusoidal, transient excitation, impulse and modelling errors, it is demonstrated that the proposed control method achieves significant improvement in terms of control accuracy, fast response and robustness. It offers a more effective and reliable method for controlling the two‐degree‐of‐freedom rotation stage, addressing the challenges posed by various interfering factors. Meanwhile, through comprehensive comparisons with various optimization algorithms, we have proven that SSA–GA has the shortest optimization time. Consequently, the proposed method exhibits excellent application potential and broad prospects for future applications.
1 January 2023 in Mathematical Problems in Engineering
As a hot topic in military research, small combat robots are always in a dynamic process when traveling, causing the body tube to vibrate which affects its firing accuracy. Different from the traditional two‐degree‐of‐freedom combat robot, this paper establishes a rigid‐flexible coupling dynamics model for the new three‐degree‐of‐freedom combat robot to study the response characteristics of its body tube during travel. To accurately reflect the driving conditions of the mobile robot, a road surface unevenness model was established using the sine wave superposition method. The firing accuracy of a small combat robot can be affected by the speed and road conditions, as shown in numerous studies. The effects of arm structure, arm mounting position, and firing angle on the vibration response of the body tube are analyzed in this paper. The results show that a reference for improving the design of small combat robots can be found in a correlation between the structure, mounting position, and firing angle of the robotic arm, and the body tube’s vibration response.