Unai Silvan

Dr. Unai Silvan


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 February 2022 in Polymers
Verified
Journal Article
Open access
PDF file
SMSheila Maiz-Fernández
Sheila Maiz-Fernández
Leyre Pérez-ÁlvarezLeyre Pérez-Álvarez
Leyre Pérez-Álvarez
USUnai Silvan
Unai Silvan
José Luis Vilas-VilelaJosé Luis Vilas-Vilela
José Luis Vilas-Vilela
Senentxu Lanceros-MendezSenentxu Lanceros-Mendez
Senentxu Lanceros-Mendez
Three-dimensional (3D) printing represents a suitable technology for the development of biomimetic scaffolds for biomedical and tissue engineering applications. However, hydrogel-based inks’ printability remains a challenge due to their restricted print accuracy, mechanical properties, swelling or even cytotoxicity. Chitosan is a natural-derived polysaccharide that has arisen as a promising bioink due to its biodegradability, biocompatibility, sustainability and antibacterial properties, among others, as well as its ability to form hydrogels under the influence of a wide variety of mechanisms (thermal, ionic, pH, covalent, etc.). Its poor solubility at physiological pH, which has traditionally restricted its use, represents, on the contrary, the simplest way to induce chitosan gelation. Accordingly, herein a NaOH strong base was employed as gelling media for the direct 3D printing of chitosan structures. The obtained hydrogels were characterized in terms of morphology, chemical interactions, swelling and mechanical and rheological properties in order to evaluate the influence of the gelling solution’s ionic strength on the hydrogel characteristics. Further, the influence of printing parameters, such as extrusion speed (300, 600 and 800 mm/min) and pressure (20–35 kPa) and the cytocompatibility were also analyzed. In addition, printed gels show an electro-induced motion due to their polycationic nature, which highlights their potential as soft actuators and active scaffolds.

29 July 2022 in Gels
Verified
Journal Article
Open access
PDF file
SSheila Maiz
Sheila Maiz
Leyre Pérez-ÁlvarezLeyre Pérez-Álvarez
Leyre Pérez-Álvarez
USUnai Silvan
Unai Silvan
José Luis Vilas-VilelaJosé Luis Vilas-Vilela
José Luis Vilas-Vilela
Senentxu Lanceros-MendezSenentxu Lanceros-Mendez
Senentxu Lanceros-Mendez
In situ-forming, biodegradable, and self-healing hydrogels, which maintain their integrity after damage, owing to dynamic interactions, are essential biomaterials for bioapplications, such as tissue engineering and drug delivery. This work aims to develop in situ, biodegradable and self-healable hydrogels based on dynamic covalent bonds between N-succinyl chitosan (S-CHI) and oxidized aldehyde hyaluronic acid (A-HA). A robust effect of the molar ratio of both S-CHI and A-HA was observed on the swelling, mechanical stability, rheological properties and biodegradation kinetics of these hydrogels, being the stoichiometric ratio that which leads to the lowest swelling factor (×12), highest compression modulus (1.1·10−3 MPa), and slowest degradation (9 days). Besides, a rapid (3 s) self-repairing ability was demonstrated in the macro scale as well as by rheology and mechanical tests. Finally, the potential of these biomaterials was evidenced by cytotoxicity essay (>85%).

11 August 2023 in Frontiers in Immunology
Verified
Journal Article
Open access
SMSara Martin-Iglesias
Sara Martin-Iglesias
LHLara Herrera
Lara Herrera
SSSilvia Santos
Silvia Santos
MVMiguel Ángel Vesga
Miguel Ángel Vesga
CECristina Eguizabal
Cristina Eguizabal
USUnai Silvan
Unai Silvan
Natural killer (NK) cells are lymphocytes of the innate immune system that play a key role in the elimination of tumor and virus-infected cells. Unlike T cells, NK cell activation is governed by their direct interaction with target cells via the inhibitory and activating receptors present on their cytoplasmic membrane. The simplicity of this activation mechanism has allowed the development of immunotherapies based on the transduction of NK cells with CAR (chimeric antigen receptor) constructs for the treatment of cancer. Despite the advantages of CAR-NK therapy over CAR-T, including their inability to cause graft-versus-host disease in allogenic therapies, a deeper understanding of the impact of their handling is needed in order to increase their functionality and applicability. With that in mind, the present work critically examines the steps required for NK cell isolation, expansion and storage, and analyze the response of the NK cells to these manipulations. The results show that magnetic-assisted cell sorting, traditionally used for NK isolation, increases the CD16+ population of NK cultures only if the protocol includes both, antibody incubation and passage through the isolation column. Furthermore, based on the importance of surface potential on cellular responses, the influence of surfaces with different net surface charge on NK cells has been evaluated, showing that NK cells displayed higher proliferation rates on charged surfaces than on non-charged ones. The present work highlights the relevance of NK cells manipulation for improving the applicability and effectiveness of NK cell-based therapies.

29 June 2024 in Acta Biomaterialia
Verified
Journal Article
Closed access
PRPaula Rodriguez-Lejarraga
Paula Rodriguez-Lejarraga
SMSara Martin-Iglesias
Sara Martin-Iglesias
AMAndrea Moneo-Corcuera
Andrea Moneo-Corcuera
ACAdai Colom
Adai Colom
LRLorena Redondo-Morata
Lorena Redondo-Morata
SLSenentxu Lanceros-Mendez
Senentxu Lanceros-Mendez

28 October 2025 in Polymers
Verified
Journal Article
Open access
PDF file
AGAne García-García
Ane García-García
USUnai Silvan
Unai Silvan
Leyre Pérez-ÁlvarezLeyre Pérez-Álvarez
Leyre Pérez-Álvarez
Senentxu Lanceros-MendezSenentxu Lanceros-Mendez
Senentxu Lanceros-Mendez
Bio-based photo-crosslinkable hydrogels are used in tissue engineering as three-dimensional printable scaffolds due to their functional and biological similarities with the extracellular matrix (ECM). In this work, emerging bioink candidates such as chitosan, alginate and gelatin-based photo-crosslinkable hydrogel were developed using extrusion-based 3D printing to establish a better understanding of their applicability. The polymers were methacrylated by the same methacrylation reaction pathway, which enabled successful light-induced 3D printing. Morphology, swelling (6–40%), mechanical (Young’s modulus, 0.1–0.5 KPa) and rheological properties (300–1000 Pa), degradation kinetics (10->60 days) and printability of the gels were also characterized in identical conditions for the first time. 3D-printability results indicated that methacrylated gelatin enhanced printability, shape fidelity and integrity of printed structures compared to methacrylated alginate, which presents structural instability and poorer printing control due to its low crosslink density. Moreover, cell attachment and Live/Dead assays using bone marrow-derived mesenchymal stem cells (BM-MSCs) showed that all formulations have good biocompatibility for use as scaffolds. Specifically, gelatin-based hydrogels showed a higher level of BM-MSCs attachment and spreading than the other types of hydrogels. Overall, our results suggest that the hydrogels based on these three biopolymers present good potential as a biomaterial for light-induced extrusion-based 3D printing.

5 November 2020 in Bio-Protocol
Verified
Journal Article
Open access
PDF file
EPEric Parigoris
Eric Parigoris
DDDaniel L. Dunkelmann
Daniel L. Dunkelmann
USUnai Silvan
Unai Silvan
Giant unilamellar vesicles (GUVs) are a widely used model system for a range of applications including membrane biophysics, drug delivery, and the study of actin dynamics. While several protocols have been developed for their generation in recent years, the use of these techniques involving charged lipid types and buffers of physiological ionic strength has not been widely adopted. This protocol describes the generation of large numbers of free-floating GUVs, even for charged lipid types and buffers of higher ionic strength, using a simple approach involving soft polyacrylamide (PAA) gels. This method entails glass cover slip functionalization with (3-Aminopropyl)trimethoxysilane (APTES) and glutaraldehyde to allow for covalent bonding of PAA onto the glass surface. After polymerization of the PAA, the gels are dried in vacuo. Subsequently, a lipid of choice is evenly dispersed on the dried gel surface, and buffers of varying ionic strength can be used to rehydrate the gels and form GUVs. This protocol is robust for the production of large numbers of free-floating GUVs composed of different lipid compositions under physiological conditions. It can conveniently be performed with commonly utilized laboratory reagents.