Liqiang LIU

Liqiang LIU


Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 August 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
CQChunxu Qin
Chunxu Qin
YHYongxiang Huang
Yongxiang Huang
LLLiqiang LIU
Liqiang LIU
HLHuijuan Liang
Huijuan Liang
JSJiafeng Shang
Jiafeng Shang
YXYunpeng Xue
Yunpeng Xue
With 45# transformer oil as the base fluid, different concentrations of TiO2 nanomodified transformer oil were prepared via the thermal oscillation method. Nanomodified transformer oil with a concentration of 0.01 g/L was selected for evaluation via the breakdown test. Then, 0.01 g/L nanomodified transformer oil and ordinary 45# transformer oil were subjected to the variable control of different moisture contents and different temperatures, and breakdown tests under different types of electrodes were performed within the temperature range of −30 °C to 30 °C. The test results showed the following: Under severe cold conditions, the improvement effect of the breakdown voltage in different temperature ranges was different. Within the temperature range of −30 °C to −10 °C, the enhancement effect could reach 13% to 15%. Within the temperature range of −10 °C to 0 °C, the enhancement effect could reach 8% to 9%. Within the temperature range of 0 °C to 30 °C, the enhancement effect could reach 18% to 21%. Compared with the test results at high water contents, the improvement in the breakdown voltage amplitude of transformer oil by nanomaterials was more obvious at low water contents. In addition, nanomaterials could reduce the dispersion of the breakdown voltage to make the breakdown voltage more stable. Lastly, COMSOL was used to simulate the polarization process of nanoparticles under a uniform electric field and the influence of the trajectory of charged particles in the oil to further analyze the mechanism of the influence of nanoparticles in oil on the breakdown voltage of the oil gap. The simulation results showed that, when the particles were accelerated by the electric field, they moved irregularly. After adding nanoparticles, the charged particles were adsorbed by the nanoparticles when passing through the nanoparticles, which reduced the migration rate of charged particles in the oil. The breakdown voltage of the oil gap increased.

27 May 2024 in Sensors
Verified
Journal Article
Open access
PDF file
CQChunxu Qin
Chunxu Qin
XZxiaokai zhu
xiaokai zhu
PZPengfei Zhu
Pengfei Zhu
WLWenjie Lin
Wenjie Lin
LLLiqiang LIU
Liqiang LIU
HHHuichun Hua
Huichun Hua
To investigate the pattern recognition of complex defect types in XLPE (cross-linked polyethylene) cable partial discharges and analyze the effectiveness of identifying partial discharge signal patterns, this study employs the variational mode decomposition (VMD) algorithm alongside entropy theories such as power spectrum entropy, fuzzy entropy, and permutation entropy for feature extraction from partial discharge signals of composite insulation defects. The mean power spectrum entropy (PS), mean fuzzy entropy (FU), mean permutation entropy (PE), as well as the permutation entropy values of IMF2 and IMF13 (Pe) are selected as the characteristic quantities for four categories of partial discharge signals associated with composite defects. Six hundred samples are selected from the partial discharge signals of each type of compound defect, amounting to a total of 2400 samples for the four types of compound defects combined. Each sample comprises five feature values, which are compiled into a dataset. A Snake Optimization Algorithm-optimized Support Vector Machine (SO-SVM) model is designed and trained, using the extracted features from cable partial discharge datasets as case examples for recognizing cable partial discharge signals. The identification outcomes from the SO-SVM model are then compared with those from conventional learning models. The results demonstrate that for partial discharge signals of XLPE cable composite insulation defects, the SO-SVM model yields better identification results than traditional learning models. In terms of recognition accuracy, for scratch and water ingress defects, SO-SVM improves by 14.00% over BP (Back Propagation) neural networks, by 5.66% over GA-BP (Genetic Algorithm–Back Propagation), and by 12.50% over SVM (support vector machine). For defects involving metal impurities and scratches, SO-SVM improves by 13.39% over BP, 9.34% over GA-BP, and 12.56% over SVM. For defects with metal impurities and water ingress, SO-SVM shows enhancements of 13.80% over BP, 9.47% over GA-BP, and 13.97% over SVM. Lastly, for defects combining metal impurities, water ingress, and scratches, SO-SVM registers increases of 11.90% over BP, 9.59% over GA-BP, and 12.05% over SVM.

1 June 2021 in International Journal of Automation and Computing
Verified
Journal Article
Closed access
PDF file
SQSheng Qi
Sheng Qi
YQYongsheng Qi
Yongsheng Qi
XGxuejin Gao
xuejin Gao
YLYong-Ting Li
Yong-Ting Li
LLLiqiang LIU
Liqiang LIU

1 July 2010 in International Journal of Applied Electromagnetics and Mechanics
Verified
Journal Article
Closed access
PDF file
LLLiqiang LIU
Liqiang LIU
XLXianjue Luo
Xianjue Luo
TNTao Niu
Tao Niu
In China, the serious accidents due to severe corrosion of substation's grounding grid often take place. To better analyze results of corrosion diagnosis for grounding grids, a novel approach to creditability analysis by means of testability matrix factorization was presented. A new testability matrix was derived, which has only to do with topological structure and test information without any partial derivative operation, and then nonlinear diagnostic equations were established. The branch ambiguity groups and the set of surely testable branches were obtained through the testability matrix by Gauss-Jordan elimination method. The example of simulation shows that the results of the surely testable components are changeless in different diagnosis under fully tested conditions. It points out that misdiagnosis is inevitably due to the existence of ambiguity groups.

18 November 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
杰朱杰 朱
杰 朱
CDChangjiang Ding
Changjiang Ding
CCChuan qiang Che
Chuan qiang Che
LLLiqiang LIU
Liqiang LIU
君连君君 连
君君 连
CQChunxu Qin
Chunxu Qin
This article studies the electrohydrodynamic drying of ginger. In this work, drying experiments were performed in an electrohydrodynamic drying (EHD) system at various AC voltages (0 kV (control), 15 kV, 20 kV, 25 kV, and 30 kV). The drying properties and volatile components of ginger were thoroughly examined and studied using IR spectroscopy and GC–MS. The findings revealed that electrohydrodynamics significantly increased the drying rate and reduced the drying time of ginger, with a sevenfold increase in drying rate and a one-third reduction in drying time at 30 kV. The peak of the infrared spectrum of ginger remains unchanged. We found 240 volatile chemicals under different drying voltages. The primary volatile chemicals were esters and aldehydes. The ginger products dried at 30 kV had the lowest aldehyde concentration. These findings give an experimental and theoretical foundation for applying electrohydrodynamics to the subject of ginger drying.

4 October 2025 in Food Chemistry: X
Verified
Journal Article
Open access
JLJunjun Lian
Junjun Lian
CDChangjiang Ding
Changjiang Ding
LLLiqiang LIU
Liqiang LIU
CCChuanqiang Che
Chuanqiang Che
ZSZhiqing Song
Zhiqing Song
JLJingli Lu
Jingli Lu
This study examined the effects of electrohydrodynamic (EHD) drying on potatoes (high-starch material) across alternating voltages (0 kV (control), 15, 19, 23, and 27 kV), analyzing drying kinetics and quality parameters. Conventional assessments typically examine drying kinetics, surface morphology, reducing sugars, and protein secondary structure; this study extends the quality assessment framework to include total polyphenol content, starch properties, and volatile organic compounds (VOCs). Results showed that EHD drying significantly improved drying efficiency and produced smoother surfaces. However, it altered the protein secondary structure, reducing digestibility. Notably, EHD drying increased polyphenol concentration. Furthermore, amylose content exceeded the control at voltages above 19 kV. Given polyphenols' cardioprotective properties, amylose's distinctive nutritional profile, and its blood glucose regulatory effects, EHD-dried potatoes possess substantial market potential. For flavor, EHD technology increased aldehyde concentrations (key potato VOCs), enhancing the flavor profile. These findings indicate that EHD drying is particularly suitable for functional food production