Pervaporation, which is a non-pressure driven membrane process, was evaluated to determine its viability for desalinating high-salinity source waters like those originating from oil and natural gas development (produced water). Two types of membrane material chemistries were studied in order to identify the optimal properties for maximizing the permeate flux under a given set of operating conditions. Permeate flux was determined to be a significant function of membrane thickness and the diffusion coefficient of water through the membrane. The diffusion coefficient is in turn a function of the membrane's affinity for water (hydrophilicity) and its fractional free volume space. A cellulose triacetate membrane (Membrane B) achieved fluxes of 0.06 m3m–2day–1 when treating solutions having salt concentrations of 100 g L–1, comparable to fluxes achieved by other types of non-pressure driven membrane processes. The flux increased in a linear fashion with decreasing ionic strength and improved through increases in the vapor pressure gradient and/or inclusion of a feed channel spacer into the test cell. Salt rejection efficiencies by all membranes were >99%; however, co-ions were able to penetrate into the membrane material matrix over time.
1 November 2020 in Environmental Engineering Science
Manipulation of water chemistry plays an important role in water and wastewater treatment. Much effort has been directed at accomplishing such changes in ways that require less energy and material consumption to reduce treatment costs and improve process sustainability. Magnetic fields have been shown to affect the properties of water and its constituents. In this study, theoretical assessments of changes in electrical conductivity and proton concentration, as a function of flow velocity through a magnetic field, were developed and experimentally verified. Experiments were done using a flow-through system consisting of permanent neodymium magnets arranged in a helical pattern in a pipe to generate a constant multidirectional magnetic field (1.350 T). In accordance with increasing flow velocity (8–6 cm/s), the proton concentration decreased from 10−7 to mol/L (pH 7–7.22). The model developed in this study indicated that pH would increase from 7 to 14 at a velocity of 100 cm/s. Change of electrical conductivity increased by 100 to 250 μS/cm with increasing flow velocity. The decrease in proton concentration was due to an increase in hydrogen bonding between water molecules and protons. Electrical conductivity was increased due to weakening of the hydration shells around the constituent ions and an increase in the internal electrical field.
1 August 2014 in Journal of Colloid and Interface Science
The numerical calculation of local mass distributions in membrane systems by computational fluid dynamics (CFD) offers indispensable benefits. However, the concept to calculate such distributions in response to separate variations of operation conditions (OCs) makes it difficult to address overall, flow-physics-related questions, which require the consideration of the collective interaction of OCs. It is shown that such understanding-related relationships can be obtained by the analytical solution of the advection–diffusion equation considered. A Fourier series model (FSM) is presented, which provides exact solutions of an advection–diffusion equation for a wide range of OCs. On this basis, a new zeroth-order model is developed, which is very simple and as accurate as the complete FSM for all conditions of practical relevance. Advection-dominated blocked and diffusion-dominated unblocked flow regimes are identified (depending on a Péclet number which compares the flow geometry with a length scale imposed by the flow), which implies relevant requirements for the use of lab results for pilot- and full-scale applications. Analyses reveal the equivalence of variations of OCs, which offers a variety of options to accomplish desired flow regime changes.
20 January 2018 in Journal of Nanoparticle Research
The Edward C Little Water Recycling Facility (ECLWRF) is the largest high-purity water recycling facility in the United States. Here, microfiltration (MF) membranes play a critical role in treating the secondary effluent and serving as pretreatment to the downstream reverse osmosis systems. New chemical clean-in-place (CIP) formulations were evaluated through pilot-scale tests for their ability to improve the performance restoration for the Phase III continuous MF (CMF) membranes at the ECLWRF. Membrane autopsies found that the primary fouling mechanisms for the CMF membranes were biological and organic in origin. It was also determined that the current CIP protocol provided an incomplete removal of the biological and organic foulants. The cleaning test results found that the current CIP regime for the Phase III system performed better than the four commercially available cleaning solutions evaluated here. However, improved results were obtained when hydrogen peroxide was added to the current CIP regime c...