A novel compact multiple-input multiple-output (MIMO) antenna is proposed with wideband gain enhancement. It consists of two identical antenna elements spacing about half wavelength. Firstly, a 1-to-2 Y-shaped power divider with wideband anti-phase outputs is designed to feed two modified Vivaldi radiators. The currents on the two radiating surfaces keep the same direction in a wide band to increase radiation without being cancelled. Secondly, the square-ring unit cell is analyzed to form metasurface, placed in the front of the radiator. It can guide the forward electromagnetic radiation while reducing the backward radiation. Thirdly, a U-shaped slot is etched between the two modified Vivaldi radiators. It is approximated as an effective electrically small dipole radiator. Such arrangement further effectively enhances the radiation performance in the direction of the main lobe and destructively interferes with the side lobe radiation. These features make the antenna far-field radiation pattern re-shaped. Thereby, the gain is improved in a wide bandwidth. Meanwhile, the MIMO antenna diversity performance is analyzed with low mutual coupling. Wideband gain enhancement contributes to improving the detection capability of the frequency modulated continuous wave (FMCW) radar sensor. As a proof of concept, the proposed MIMO antenna prototype is fabricated. The measured impedance bandwidth ranges from 11.5 to 21.3 GHz (59.76% FBW) with isolation of ≥ 24.92 dB. The gain is up to 10.6 dBi, the radiation efficiency is 88.01-90.02%, and the envelope correlation coefficient (ECC) is ≤ 0.00122. Integrated with the transceiver chip fabricated on the 65-nm CMOS process, the proposed MIMO antenna is applied in the FMCW radar sensor. The test system is built up, and the experiments on different breathing conditions are conducted for different human subjects. The proposed MIMO antenna could reduce measurement error, thereby improving measurement accuracy for human respiratory monitoring.
4 May 2021 in IEEE Transactions on Antennas and Propagation
A gain-enhanced wideband multiple-input multiple-output (MIMO) antenna with dual polarization and high isolation is proposed for microbase station application. It includes two mutually orthogonal bowtie dipole radiators, four bowtie parasitic elements with the switch function of ON-/OFF-state, four vertical stubs, and a cavity, which are fed by a pair of 50 $\Omega $ coaxial cables. Shifting between the dual-band and single-band is realized by the switch. Four resonant frequencies are generated by cooperative operation of the radiators and cavity, and thus two wide bands are formed. C-shaped slots on radiators and switch slots on parasitic elements are analyzed for estimating the impact on resonant frequency and bandwidth, and the vertical stubs improve the impedance matching. The proposed wideband antenna achieves enhanced diversity performance in the MIMO antenna system. As a proof of concept, a prototype of the expanded four-element MIMO antenna is fabricated. Measured results match well with simulated data. When the switch is ON-state, it operates in 1.58–2.77 and 4.71–6.18 GHz with gains of 9.4–11.2 and 9.1–10.9 dBi, and radiation efficiencies of ≥87.5% and ≥87%, respectively. When the switch is OFF-state, it operates in 1.56–2.76 GHz with a gain of 8.9–10.1 dBi and radiation efficiency of ≥88%. Element isolation is ≥35.3 dB, and envelope correlation coefficient (ECC) is ≤0.002. The experiment of the established $2 \times 2$ MIMO system demonstrates that it can operate with a lower bit error rate (BER), and the design shows enormous potential to be applied as massive MIMO microbase station antennas.
24 June 2020 in IEEE Transactions on Vehicular Technology
A novel compact multiple-input-multiple-output (MIMO) antenna with a wide impedance bandwidth and high port isolation is proposed for vehicular base stations. The design consists of four identical vertically-polarized monopole-based antenna elements, which are symmetrical about the central axis and are placed 90 degrees apart from each other. The wideband and decoupling features are theoretically analyzed and experimentally demonstrated. Four resonant frequencies are created by the F-shaped radiator, independent reflector and cross-π-shaped structure, which increase the MIMO antenna bandwidth. Parasitic stubs further improve the impedance matching in the high-frequency band. The cross-π-shaped structure acts as a decoupling function and reduces the mutual coupling, which is realized by using two metal strips shorted to the ground plane, perpendicular to each other. The etched slots further improve port isolation. The effects of imitated perfect vehicle metallic surface are also analyzed. The proposed MIMO antenna prototype is fabricated and measured to verify the concept of design. The operating frequency band is from 1.95 GHz to 6.25 GHz with a reflection coefficient of better than −10 dB, where the realized gain is higher than 3.3 dBi, and the maximum value is 6.16 dBi at 2.6 GHz. High isolation of >16.5 dB and low envelop correlation coefficient of <0.028 among designed MIMO antenna elements are also achieved.
6 March 2023 in IEEE Transactions on Industrial Electronics
A novel resonant tri-coil transducer is proposed to induce thermoacoustic (TA) signals for detecting rail internal defects. It consists of a ferrite plate-backed tri-coil and its associated circuits, a shielding layer, and a three-dimensional printed enclosure for supporting and securing. General TA detection theory is illustrated to understand how to detect rail internal defects. For achieving electromagnetic (EM) field shaping and focusing, the physical structure of the proposed transducer is optimized. It reduces backward EM fields and interference. Then, an equivalent circuit model between the proposed transducer and the rail is constructed to analyze optimal power transfer efficiency as a function of distance and frequency. To validate the design concept, the proposed transducer is fabricated for inducing TA signals, and experiments are performed. Several engineered rail specimens (UIC-60E) with different types of defects are prepared. The induced TA waves are found to be compressional. With selected features, a support vector machine algorithm-based multinomial classifier model is trained and employed for intelligent processing. Then, the proposed transducer is integrated into the self-designed automatic rail monitoring system. Experimental results show that the self-designed system can achieve an accuracy rate of 96.4%, successfully identifying defects in defect classification. The proposed transducer has low cost in fabrication and maintenance, focused magnetic fields with a large lift-off distance and enhanced acoustic wave intensity. Compared to earlier version of the system, the spacing between the transmitter and the rail has been further increased.
14 October 2021 in IEEE Transactions on Vehicular Technology
A novel low-profile wideband antenna is proposed with high-gain, high-isolated, and dual-polarized properties. It has two mutually-orthogonal bowtie-shaped dipole radiators, associated with four rectangular parasitic elements and a cylindrical artificial magnetic conductor (AMC) cavity. By introducing parasitic elements, additional resonance is generated, and the bandwidth is widened. The gain is mainly improved by wideband AMC reflector and cylindrical metallic wall of the cavity. The AMC reflector operates with 90o reflection-phase bandwidth of 2.35-4.25 GHz, and its equivalent circuit model is developed to understand the working mechanism. The orthogonal placement of two dipole radiators ensures polarization diversity and high isolation. The impacts of various environmental conditions and antenna installation on antenna performance are investigated. To verify the design concept and demonstrate its excellent performances, a prototype is fabricated and measured. The proposed wideband antenna is with a height of 0.18 wavelength at the center frequency. The measured -10-dB impedance bandwidth is from 2.16 to 3.96 GHz, where the realized gain is 8.34-10.96 dBi and the radiation efficiency is more than 81.8%. High isolation of > 28.65 dB and low envelop correlation coefficient (ECC) of < 2.74 10-3 are also achieved between antenna elements. It can be used in the base station for intelligent Internet of Vehicle (IoV) applications, which covers the bands of WLAN, WiMAX, Bluetooth, LTE, and 5G sub-6 GHz.
Efficient wireless power transmission to a designated location can reduce the size of implantable device and save source energy, but the receiver coil and rectifier circuit still occupy a large area. This paper proposes a novel magnetic resonant coupling (MRC)-based double figure-of-eight coil sensor system to induce and monitor heat. Implantable devices could obtain energy from the surrounding electric field or heating effect. The fundamental of generating the heating effect by the proposed coil-based sensor system is derived, and conceptual system architecture is built. Then the radiating coil is analyzed in terms of Litz-wire coil optimization, lumped parameter extraction, impedance-matching network, equivalent circuit model, and coupling coefficient. Considering the current ratio, operating frequency, and designated location, the triple-mode operation mechanism is analyzed for the first time to adjust superposed electromagnetic fields at the designated location. At the odd-mode resonance, the electric field intensity in the middle between two figure-of-eight coils is significantly improved. Finally, the physical prototype of proposed coil-based sensor system is built up and experiments are conducted to test the currents in both figure-of-eight coils as well as the induced voltage and temperature change in the in-vitro sample by using the electrode sensor and thermocouple sensor. Measurements validate the feasibility of the proposed coil-sensor system. It also provides essential guidance on designing sensors for deep-tissue stimulation and hyperthermia treatment.