Lapping has a history of hundreds of years, yet it still relies on the experience of workers. To improve the automaticity and controllability of the lapping process, a modeling method of friction and wear is developed to predict the surface profile evolution of the workpiece and lapping plate in the lapping process. In the proposed method, by solving the balance equations of resultant force and moment, the inclination angles of the workpiece can be calculated; thus, a more accurate contact pressure distribution of the workpiece/lapping plate interface can be calculated. Combined with the material removal rate model, the continuous evolution process of the workpiece and lapping plate can be predicted in the lapping process. The modeling method was validated by a lapping test of a flat optical glass workpiece (Φ 100 mm) with a composite copper plate. The results show that the proposed method can predict the evolution of the surface profile of the workpiece and lapping plate with high accuracy. Consequently, the lapping plate can be dressed at the right time point. Benefit from this, in the validation test the Peak to Valley (PV) value of the workpiece (with 5 mm edge exclusion) was reduced from 5.279 µm to 0.267 µm in 30 min. The proposed surface profile evolution modeling method not only improves the lapping efficiency but also provides an opportunity to understand the lapping process.
25 October 2022 in International Journal of Mechanical Sciences
Spin coating is widely used to form a uniform film on a solid substrate. Airflow disturbance has been considered as one of the most influential factors of film thickness, especially for spin coating on large area noncircular substrates. However, the exact mechanism of airflow disturbance influence, such as air shear force effect or indirect effects on evaporation, so far, remains ambiguous. In this work, the influence mechanism of airflow disturbance on film uniformity on large rectangular substrates is studied. The experiment with airflow disturbance is artificially introduced and contrasts with the common spin coating conditions. Both numerical simulations and experiments show a causal relationship between airflow disturbances and the uniformity of the spin coating film. The film thickness and airflow field results show that the film uniformity is affected by solvent evaporation and air shear force caused by airflow disturbance. Additionally, evaporation inhibition and airflow disturbance results do not support the proposition that air shear forces can affect film uniformity, but that solvent evaporation is the primary factor affecting film thickness uniformity. These conclusions are beneficial to the understanding of the mechanism of airflow disturbance influence on the film thickness uniformity on large rectangular substrates.
High-performance component production requires nearly homogeneous materials, ultra-precise machining and a high surface integrity. However, conventional design and manufacturing methodologies, which continuously increase the geometric tolerance to meet the performance requirements, lead to cost increases that even exceed the existing machining capabilities. This paper presents a general manufacturing methodology for high-performance components under realistic conditions, such as the current capability for material forming and machining. In order to achieve an excellent component performance, this methodology includes parameter extraction, sensitivity analysis, and trimming processes that consider the effect of material removal resolution and processing uncertainties. Simulations performed on the hemispherical resonator demonstrate how the proposed methodology is applied to fabricate extremely high-performance resonators. An efficient modal tuning strategy is proposed based on a sensitivity analysis of the tuning process parameters subject to material removal resolution and uncertainties. The tuning results prove the feasibility of this new methodology for high-performance components manufacturing. The elimination of the frequency split can finally be achieved with surface tuning iteratively. The proposed methodology provides an effective solution to achieve high-performance components under limited machining capabilities.