The concept of a large intelligent surface (LIS) has recently emerged as a promising wireless communication paradigm that can exploit the entire surface of man-made structures for transmitting and receiving information. An LIS is expected to go beyond massive multiple-input multiple-output (MIMO) system, insofar as the desired channel can be modeled as a perfect line-of-sight. To understand the fundamental performance benefits, it is imperative to analyze its achievable data rate, under practical LIS environments and limitations. In this paper, an asymptotic analysis of the uplink data rate in an LIS-based large antenna-array system is presented. In particular, the asymptotic LIS rate is derived in a practical wireless environment where the estimated channel on LIS is subject to estimation errors, interference channels are spatially correlated Rician fading channels, and the LIS experiences hardware impairments. Moreover, the occurrence of the channel hardening effect is analyzed and the performance bound is asymptotically derived for the considered LIS system. The analytical asymptotic results are then shown to be in close agreement with the exact mutual information as the number of antennas and devices increase without bounds. Moreover, the derived ergodic rates show that hardware impairments, noise, and interference from estimation errors and the non-line-of-sight path become negligible as the number of antennas increases. Simulation results show that an LIS can achieve a performance that is comparable to conventional massive MIMO with improved reliability and a significantly reduced area for antenna deployment.

Reconfigurable intelligent surfaces (RISs) have recently emerged as a promising technology that can achieve high spectrum and energy efficiency for future wireless networks by integrating a massive number of low-cost and passive reflecting elements. An RIS can manipulate the properties of an incident wave, such as the frequency, amplitude, and phase, and, then, reflect this manipulated wave to a desired destination, without the need for complex signal processing. In this paper, the asymptotic optimality of achievable rate in a downlink RIS system is analyzed under a practical RIS environment with its associated limitations. In particular, a passive beamformer that can achieve the asymptotic optimal performance by controlling the incident wave properties is designed, under a limited RIS control link and practical reflection coefficients. In order to increase the achievable system sum-rate, a modulation scheme that can be used in an RIS without interfering with existing users is proposed and its average symbol error rate is asymptotically derived. Moreover, a new resource allocation algorithm that jointly considers user scheduling and power control is designed, under consideration of the proposed passive beamforming and modulation schemes. Simulation results show that the proposed schemes are in close agreement with their upper bounds in presence of a large number of RIS reflecting elements thereby verifying that the achievable rate in practical RISs satisfies the asymptotic optimality.

Large intelligent surfaces (LISs) have been recently proposed as an effective wireless communication solution that can leverage antenna arrays deployed on the entirety of man-made structures such as walls. An LIS can provide space-intensive and reliable communication, enabling the desired wireless channel to exhibit a perfect line-of-sight. However, the outage probability of LIS, which is an important performance metric to evaluate the system reliability, remains uncharacterized. In this paper, the distribution of uplink sum-rate is asymptotically analyzed for an LIS system. Given the derived asymptotic distribution, the outage probability is derived for the considered LIS system. Simulation results show that the results of the proposed asymptotic analyses are in close agreement to the exact mutual information in the presence of a large number of antennas and devices.

In this paper, we study the channel state information (CSI) feedback based on the deep autoencoder (AE) considering the feedback errors and feedback delay in the frequency division duplex (FDD) massive multiple-input multiple-output (MIMO) system. We construct the deep AE by modeling the CSI feedback process, which involves feedback transmission errors and delays. The deep AE is trained by setting the delayed version of the downlink channel as the desired output. The proposed scheme reduces the impact of the feedback errors and feedback delay. Simulation results demonstrate that the proposed scheme achieves better performance than other comparable schemes.

Large intelligent surfaces (LISs) constitute a new and promising wireless communication paradigm that relies on the integration of a massive number of antenna elements over the entire surfaces of man-made structures. The LIS concept provides many advantages, such as the capability to provide reliable and space-intensive communications by effectively establishing line-of-sight (LOS) channels. In this paper, the system spectral efficiency (SSE) of an active LIS system is asymptotically analyzed under a practical LIS environment with a well-defined uplink frame structure. In order to verify the impact on the SSE of pilot contamination, the SSE of a multi-LIS system is asymptotically studied and a theoretical bound on its performance is derived. Given this performance bound, an optimal pilot training length for multi-LIS systems subjected to pilot contamination is characterized and, subsequently, the number of devices that need to be serviced by the LIS in order to maximize the performance is derived. Simulation results show that the derived analyses are in close agreement with the exact mutual information in presence of a large number of antennas, and the achievable SSE is limited by the effect of pilot contamination and intra/inter-LIS interference through the LOS path, even if the LIS is equipped with an infinite number of antennas. Additionally, the SSE obtained with the proposed pilot training length and number of scheduled devices is shown to reach the one obtained via a brute-force search for the optimal solution.

The reconfigurable intelligent surface (RIS) has been studied for integration into satellite-aerial-terrestrial integrated networks to boost the received signal power without the additional power consumption by coordinating the passive reflecting elements' phase shift at the RIS. However, the RIS may cause inter-satellite interference to terrestrial users due to the reflection of multiple satellites' transmissions. Therefore, this paper proposes the optimal reflection, i.e., passive beamforming, of the RIS to maximize the terrestrial user's received signal-to-interference-plus-noise ratio when the interfering satellite exists. The numerical analysis and simulation results demonstrate the effectiveness and feasibility of the RIS against the interfering satellite, the optimality of the proposed reflection vector, and the superiority of the phase search algorithms in the practical discrete phase shift model.