Shifeng Zhang

Dr. Shifeng Zhang

School of Petroleum and Natural Gas Engineering, Changzhou University, Changzhou 213164, China

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 October 2023 in ACS Omega
Verified
Journal Article
Open access
XCXinying Cui
Xinying Cui
CWChengwen Wang
Chengwen Wang
WHWeian Huang
Weian Huang
SZShifeng Zhang
Shifeng Zhang
HCHaiqun Chen
Haiqun Chen
XZXin Zheng
Xin Zheng
The nanocomposite gel system has been successfully applied as a water shutoff agent to enhance oil recovery (EOR) or for plugging to control lost circulation events. In this study, the silica/polyacrylamide nanocomposite was synthesized via in situ free radical polymerization of acrylamide (AM) monomers in the presence of silica nanoparticles. The composite was cross-linked with polyethylenimine to prepare a high-strength hydrogel. The viscosity test was conducted to determine the gelation time of the gel. Rheological measurements and sand pack breakthrough pressure tests were carried out to measure the gel strength. Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) and scanning electron microscopy (SEM) tests were adopted to characterize the structure and morphology of the gel. The results show that compared to polyacrylamide (PAM) gel, the gelation time of the nanocomposite gel will decrease with increasing gel elasticity modulus, and the breakthrough pressure of the nanocomposite gel is 29.82 MPa, which increased by 65%. As shown in the ATR-FTIR test, this can be attributed to the presence of multiple hydrogen bonds for the PAM molecule with both silica and quartz sand particles. In the composite gel, hydrogen bonding mainly forms between the O atoms of PAM and the H atom on the surface of silica, enhancing gel strength and elasticity modulus with more cross-linking density and less porosity. Moreover, H bonding between additional -NH2 of PAM and quartz sand particles helps improve gel plugging pressure. However, in the silica and PAM mixture gel, the H bonding of silica occupies -NH2 of PAM, which became unavailable to attach on the sand surface, reducing the breakthrough pressure by 30%, although it can enhance the rheological strength. This study suggests that in situ composite of silica in PAM can not only greatly improve gel rheological strength but also help maintain the strong adhesion of PAM molecules onto quartz sand, resulting in better plugging performance in the sand reservoir.

19 December 2023 in ACS Omega
Verified
Journal Article
Open access
XZXin Zheng
Xin Zheng
ZDZhifeng Duan
Zhifeng Duan
YZYan Zhuang
Yan Zhuang
SZShifeng Zhang
Shifeng Zhang
XCXinying Cui
Xinying Cui
DQDonghui Qin
Donghui Qin
During oil and gas well construction, lost circulation caused substantial nonoperation time and extra costs, and hydrogel, resilient and environmentally friendly, was one of the major types of material for lost circulation treatment. To migrate the weak bonding and hydrothermal degradation of conventional single network hydrogels, dual network (DN) hydrogel was prepared and immersed in solvents of polyethylene glycol (PEG), ethylene glycol, and glycerol. The swelling of DN gels at different temperatures was studied with water content and swelling rate tests, and the gel structural and morphology was characterized with attenuated total reflectance infrared spectroscopy (ATR-IR) and scanning electron microscopy test. Then, the compression test and fracture plugging performance test were conducted to study the strength of the gel. The results show that compared to those in ethylene glycol and glycerin, DN gel after immersion in PEG (DN-PEG) exhibits greater compression strength and better plugging performance even at high temperatures. The compression strength of DN-PEG was twice that of DN hydrogel before immersion, and its fracture plug breaking pressure can reach over 10.0 MPa. After undergoing hydrothermal treatment at 90 °C, the compression strength of the DN-PEG was nearly 20 times that of the DN hydrogel, and the fracture plug breaking pressure was still 2.81 MPa. According to ATR-IR spectroscopy, as the molecular weight of the solvent increases, more hydroxyl groups in the PEG have better ability to bind with hydrogen bonds, which greatly inhibits the swelling and polymer chain breakage, thereby reducing hydrothermal degradation in the strength of the dual-network hydrogel. Our work proposed an effective method to reduce the degradation of hydrogel in water at high temperature, and the prepared DN-PEG hydrogel was a promising material for lost circulation treatments in fractured formation.

12 August 2025 in Gels
Verified
Journal Article
Open access
PDF file
XCXinying Cui
Xinying Cui
CWChengwen Wang
Chengwen Wang
WHWeian Huang
Weian Huang
SZShifeng Zhang
Shifeng Zhang
HCHaiqun Chen
Haiqun Chen
GCGang Cao
Gang Cao
During drilling operations, lost circulation frequently occurs, leading to significant loss of drilling fluids which causes environmental damage and increasing drilling costs. To address the problem of fracture plugging, gel materials have emerged as an ideal solution due to stable physicochemical properties and excellent environmental compatibility. However, most existing gels exhibit poor stability and low mechanical strength under high-temperature conditions. To overcome these limitations, high-temperature-resistant phase-conversion stiffened dual-network hydrogel for oil-based drilling fluids was developed. Phase-conversion was realized by immersing synthesized double-network hydrogel in ethylene glycol (EG), polyethylene glycol (PEG), and glycerol (Gly), optimizing and enhancing its mechanical properties, followed by plugging performance evaluations. Experimental results demonstrated that the phase-conversion stiffened gels achieved significantly improved compressive strength and plugging efficiency at elevated temperature. The GC-MS results indicated that dehydration and reagent exchange occurred during immersion, with change in the solid content of the sample. After being treated by white oil at high temperature, the oil phase almost replaced the water phase in the gel. The results of ATR-IR confirmed the formation of hydrogen bonds in the gel. TGA data revealed that PEG enhanced the thermal stability of the gel, EG negatively affected thermal stability, and Gly had negligible influence. The enhancement in gel strength primarily stems from the increase in solid content caused by phase transformation. Dehydration and multiple hydrogen bonds formed between organic reagent molecules and polymer chains in the gel have a synergistic enhancement effect.

28 May 2025 in ACS Omega
Verified
Journal Article
Open access
QXQinze Xing
Qinze Xing
LWLei Wan
Lei Wan
JZJunying Zhang
Junying Zhang
SZShifeng Zhang
Shifeng Zhang
XCXinying Cui
Xinying Cui
Natural gas hydrates are a promising energy source with considerable potential in the coming decades, and they are gaining increasing attention for their development and utilization. During hydrate extraction, it is essential to decompose hydrates to produce methane gas, while during drilling operations, hydrate decomposition should be avoided to maintain formation stability. The impact of hydrate inhibitors such as NaCl, KCl, and PVP on the decomposition of hydrates remains a controversial topic. To clarify the effects of inhibitors, we designed and proposed a novel experimental protocol, and the results show that injection of high-concentration NaCl or KCl solutions into methane hydrate samples can induce the decomposition of existing hydrates, whereas no such phenomenon was observed when a PVP solution was injected, and even with the injection of a 20% PVP solution, more hydrates continue to form slowly. In mixed solutions of NaCl and PVP, the hydrate decomposes in lower concentrations ofNaCl, indicating that PVP can promote decomposition of the hydrate. According to the Consecutive Desorption and Melting (CDM) decomposition kinetic model, inorganic salt thermodynamic inhibitors (THI) reduce parameters such as methane solubility in solution and the enthalpy of phase change in the empty hydrate lattice, and kinetic inhibitors (KI) such as PVP can lead to a decrease in the extent of surface coverage, thereby facilitating hydrate decomposition. In our study, we propose experimental methods to determine the kinetics of hydrate decomposition in inhibitor solutions and discuss the mechanisms by which inhibitors affect hydrate decomposition, providing insights for developing reasonable plans for natural gas hydrate reservoir exploitation or drilling operations.

10 November 2025 in Processes
Verified
Journal Article
Open access
PDF file
WSWei Shi
Wei Shi
SZShifeng Zhang
Shifeng Zhang
CPChao Peng
Chao Peng
LZLian Zhang
Lian Zhang
CDChenjing Dou
Chenjing Dou
YZYan Zhuang
Yan Zhuang
During sand cleanout operations in shale oil horizontal wells, severe wellbore leakage occurs due to incompatibility between plugging particles and the formation, resulting in a failure to establish circulation. This study determined the optimal plugging theory for the target formation characteristics through laboratory leakage sealing tests and numerical simulations such as fluid–discrete element coupling (CFD-DEM). The results show the following: Plugging experiments indicated that the Vickers criterion achieved the best performance, with an invasion depth of 9 mm, followed by the Ideal Packing Theory, at 12 mm, while the D90 rule performed the worst, with an invasion depth of 13 mm. The simulations results from the CFD-DEM coupling model demonstrated that the Vickers criterion achieves the most effective plugging performance, followed by the Ideal Packing Theory, with the D90 rule exhibiting the least effectiveness. This indirectly validates the rationality and effectiveness of the Vickers criterion in configuring particle sizes for plugging materials. Finally, sand-packed-tube displacement experiments demonstrate that the Vickers criterion yields the lowest permeability and optimal plugging performance, further validating its rationality and effectiveness in configuring particle sizes for plugging materials. This research provides crucial technical support for the safe and efficient development of shale oil horizontal wells, effectively reduces operational costs, and holds significant importance for advancing technological progress in shale oil extraction.

13 April 2026 in Processes
Verified
Journal Article
Open access
PDF file
JZJun Zhang
Jun Zhang
SFSheng Fan
Sheng Fan
ZHZhong He
Zhong He
XZXin Zheng
Xin Zheng
SZShifeng Zhang
Shifeng Zhang
To overcome polymer-based plugging materials’ disadvantage of being prone to degradation and failure under hydrothermal conditions, an epoxy resin plugging particle with a high-pressure-bearing capacity under high temperatures was prepared by optimizing the curing process. Bisphenol A Epoxy Resin E51 and Diethyltoluenediamine (DETDA) were selected as raw materials for sample preparation. Due to the high viscosity of the system, 1,2-cyclohexanediol diglycidyl ether was introduced as a diluent, and an optimal concentration of 20% was determined through experimental optimization. Non-isothermal differential scanning calorimetry, bottle testing, and infrared spectroscopy were employed to investigate the variation laws of curing temperature, curing time and curing degree during the epoxy resin curing process via one-step and multi-step methods. The compressive strength of the epoxy resin prepared using the two processes was evaluated. After comprehensively comparing the preparation time, process complexity, and compressive strength of the final samples of the one-step and two-step curing methods, the one-step process (90 °C/5 h) was determined to be superior. In addition, the results of the fracture plugging experiment showed that after the bulk epoxy resin prepared using the optimized process was made into particles through a mechanical method and treated under hydrothermal conditions at 120 °C, the maximum breakthrough pressure reached 4.2 MPa, which was 950% and 135.96% higher than that of Particle 1 (Poly(2-acrylamido-2-methylpropanesulfonic acid)/acrylamide (PAMPS/AM) gel) and Particle 2 (PAMPS/AM gel treated with Polyethylene glycol (PEG)), respectively, which were used as control groups. This result indicates that epoxy resin can be used as a high-temperature-resistant plugging material and should be further researched.