The present article exemplifies the application of the concept of quality by design (QbD) for the systematic development of a nanoparticulate imiquimod (IMQ) emulsion gel formulation as an investigational medicinal product (IMP) for evaluation in an academic phase-I/II clinical trial for the treatment of actinic keratosis (AK) against the comparator Aldara (EudraCT: 2015-002203-28). The design of the QbD elements of a quality target product profile (QTPP) enables the identification of the critical quality attributes (CQAs) of the drug product as the content of IMQ, the particle-size distribution, the pH, the rheological properties, the permeation rate and the chemical, physical and microbiological stability. Critical material attributes (CMAs) and critical process parameters (CPPs) are identified by using a risk-based approach in an Ishikawa diagram and in a risk-estimation matrix. In this study, the identified CPPs of the wet media ball-milling process’s milling time and milling speed are evaluated in a central composite design of experiments (DoEs) approach, revealing criticality for both factors for the resulting mean particle size, while only the milling time is significantly affecting the polydispersity. To achieve a mean particle size in the range of 300–400 nm with a minimal PdI, the optimal process conditions are found to be 650 rpm for 135 min. Validating the model reveals a good correlation between the predicted and observed values. Adequate control strategies were implemented for intermediate products as in-process controls (IPCs) and quality control (QC) tests of the identified CQAs. The IPC and QC data from 13 “IMI-Gel” batches manufactured in adherence to good manufacturing practice (GMP) reveal consistent quality with minimal batch-to-batch variability.
1 July 2005 in Int. Journal of Clinical Pharmacology and Therapeutics
Triamterene (TA), a potassium-sparing diuretic, is extensively metabolized by hydroxylation in 4'-position and subsequent conjugation by cytosolic sulfotransferases. To identify the cytochrome P450 enzyme(s) catalyzing hydroxylation of triamterene (the rate-limiting step in the formation of the sulfate ester (STA)), in vitro incubation studies were performed with human liver microsomes. Initial rates of TA hydroxylation (0 - 300 microM) were determined during a ten-minute-incubation period with liver microsomes of two donors. The role of individual CYP enzymes was determined by pre-incubation with selective inhibitors/alternative substrates. Vice versa, the effect of TA (0 - 500 microM) on 3-demethylation of caffeine (0 - 1,000 microM) was assessed. Metabolite concentrations were estimated by reversed-phase HPLC methods. TA Km values without inhibitors were 60 and 142 microM, Vmax was 177 and 220 pmol/min/mg protein, respectively. Mean inhibitor induced changes of 4'-hydroxy-TA formation were as follows: Furafylline 25 microM (CYP1A2), complete inhibition (-100%); omeprazole 250 microM (CYP1A2 inhibitor/CYP2C 19 substrate), -30%; coumarin 25 microM (CYP2A6), -11%; quinidine 25 microM (CYP2D6), -9%; ketoconazole 25 microM (CYP3A), -18%; and erythromycin 250 microM (CYP3A), -8%. In the reverse inhibition studies, TA competitively inhibited caffeine 3-demethylation with Ki values of 65 and 111 microM, respectively. 4'-hydroxylation of TA in humans appears to be mediated exclusively by CYP1A2. Inhibition or induction of CYP1A2 will change the time course of both TA and its active phase-II metabolite. The net pharmacodynamic effect of such changes is difficult to predict and needs to be evaluated in clinical studies.
Carvedilol (CAR), a racemic lipophilic aryloxy propanolamine, acts as a selective α1-adrenoreceptor antagonist and a nonselective β-adrenoreceptor antagonist. CAR metabolism mainly produces three active metabolites: desmethyl carvedilol (DMC), 4′-hydroxy carvedilol (4′OHC) and 5′-hydroxy carvedilol (5′OHC). The oxidative S-(-)-metabolites contribute to the β-antagonistic effect, yet not to the α-antagonistic effect to be observed after drug dosage. Therefore, the three β-adrenoceptor blocking metabolites, which are structurally closely related to the parent CAR, are included into the development of a bioanalytical quantitative method for all major active species relevant with respect to adrenoceptor-blockade. Because of the given pharmacological profile, resolution of the enantiomers of carvedilol, of 4′- and 5′-hydroxy carvedilol as well as of DMC, is mandatory. The current study aims to determine the response surface for the enantiomer separation of the parent CAR as well as the major metabolites on a suitable chiral stationary phase. Design of experiment approach (DoE) was utilized in an initial screening phase followed by central-composite design for delimitation of the response surface for resolution of the four enantiomeric pairs in least run time. The impact of chromatographic variables (composition and percentage of organic modifier(s), buffer type, buffer pH, flow rate) on critical peaks resolution and adjusted retention time was evaluated, in order to select the most significant critical quality attributes. On this basis, a robust UHPLC-UV method was developed and optimized for the simultaneous, enantioselective determination of CAR along with its major active metabolites (4′OHC, 5′OHC, and DMC) on Chiralpak IBN-5. The optimized UHPLC-UV method (which includes metoprolol as the internal standard) was validated according to the ICH M10 guidelines for bioanalytical methods and proven to be linear, precise, accurate, and robust. The validated assay was applied to plasma samples from cardiovascular patients treated with rac-CAR (blood randomly drawn at different times after oral CAR intake). In order to provide more insight into the mechanism of the enantiomer separation of CAR and its metabolites on the CSP, docking experiments were performed. Molecular simulation studies suggest the chiral recognition to be mainly due to different binding poses of enantiomers of the same compound.