The excitation and vibration triggered by the long-term operation of railway vehicles inevitably result in defective states of catenary support devices. With the massive construction of high-speed electrified railways, automatic defect detection of diverse and plentiful fasteners on the catenary support device is of great significance for operation safety and cost reduction. Nowadays, the catenary support devices are periodically captured by the cameras mounted on the inspection vehicles during the night, but the inspection still mostly relies on human visual interpretation. To reduce the human involvement, this paper proposes a novel vision-based method that applies the deep convolutional neural networks (DCNNs) in the defect detection of the fasteners. Our system cascades three DCNN-based detection stages in a coarse-to-fine manner, including two detectors to sequentially localize the cantilever joints and their fasteners and a classifier to diagnose the fasteners' defects. Extensive experiments and comparisons of the defect detection of catenary support devices along the Wuhan-Guangzhou high-speed railway line indicate that the system can achieve a high detection rate with good adaptation and robustness in complex environments.

In this paper, we propose a deep convolutional neural network solution to the analysis of image data for the detection of rail surface defects. The images are obtained from many hours of automated video recordings. This huge amount of data makes it impossible to manually inspect the images and detect rail surface defects. Therefore, automated detection of rail defects can help to save time and costs, and to ensure rail transportation safety. However, one major challenge is that the extraction of suitable features for detection of rail surface defects is a non-trivial and difficult task. Therefore, we propose to use convolutional neural networks as a viable technique for feature learning. Deep convolutional neural networks have recently been applied to a number of similar domains with success. We compare the results of different network architectures characterized by different sizes and activation functions. In this way, we explore the efficiency of the proposed deep convolutional neural network for detection and classification. The experimental results are promising and demonstrate the capability of the proposed approach.

This paper presents an automatic method for detecting railway surface defects called “squats” using axle box acceleration (ABA) measurements on trains. The method is based on a series of research results from our group in the field of railway engineering that includes numerical simulations, the design of the ABA prototype, real-life implementation, and extensive field tests. We enhance the ABA signal by identifying the characteristic squat frequencies, using improved instrumentation for making measurements, and using advanced signal processing. The automatic detection algorithm for squats is based on wavelet spectrum analysis and determines the squat locations. The method was validated on the Groningen-Assen track in The Netherlands and accurately detected moderate and severe squats with a hit rate of 100%, with no false alarms. The methodology is also sensitive to small rail surface defects and enables the detection of squats at their earliest stage. The hit rate for small rail surface defects was 78%.

This article proposes a new framework using physics-informed neural networks (PINNs) to simulate complex structural systems that consist of single and double beams based on Euler–Bernoulli and Timoshenko theories, where the double beams are connected with a Winkler foundation. In particular, forward and inverse problems for the Euler–Bernoulli and Timoshenko partial differential equations (PDEs) are solved using nondimensional equations with the physics-informed loss function. Higher order complex beam PDEs are efficiently solved for forward problems to compute the transverse displacements and cross-sectional rotations with less than $1e-3$ % error. Furthermore, inverse problems are robustly solved to determine the unknown dimensionless model parameters and applied force in the entire space–time domain, even in the case of noisy data. The results suggest that PINNs are a promising strategy for solving problems in engineering structures and machines involving beam systems.

Railway infrastructure monitoring is a vital task to ensure rail transportation safety. A rail failure could result in not only a considerable impact on train delays and maintenance costs, but also on safety of passengers. In this article, the aim is to assess the risk of a rail failure by analyzing a type of rail surface defect called squats that are detected automatically among the huge number of records from video cameras. We propose an image processing approach for automatic detection of squats, especially severe types that are prone to rail breaks. We measure the visual length of the squats and use them to model the failure risk. For the assessment of the rail failure risk, we estimate the probability of rail failure based on the growth of squats. Moreover, we perform severity and crack growth analyses to consider the impact of rail traffic loads on defects in three different growth scenarios. The failure risk estimations are provided for several samples of squats with different crack growth lengths on a busy rail track of the Dutch railway network. The results illustrate the practicality and efficiency of the proposed approach.