Aquaponics is an opportunity for cultivating plants and fish. Plants use nutrients from fish feces and the fishes use clean water after being filtered by plant roots. The results of fish metabolism, food residue, and temperature change will affect the pH rate. An automatic control system and monitoring pH rate on aquaponics system is designed to maintain the pH rate within a certain range. The method used is a literature study to find the basic theory in designing a control system and monitoring water pH levels. Afterward, it’s necessary to find out the arising problems. The next step to do is designing the system, starting from flow diagrams to system design. The last step to do is simulating the tools that have been designed and then testing the system. Based on the results, it can be concluded that the system could maintain the water condition automatically in pH range from 6.3 to 7.7. The average error found in this sensor was 0.67%, the average decrease in water pH level was 0.023 per day, and the controlling interval was every 42 seconds, the success rate of sending monitoring data was 100% in which the data was sent every 1 minute in 1 hour.
1 November 2019 in Journal of Physics: Conference Series
Aquaponics is an activity to cultivate plants and fish. Giving the organic liquid fertilizer as a nutrient enhancer will improve the quality of catfish and lettuce yields. However, this causes the water to become dirtier. The deteriorating water is characterized by the TDS value in aquaponic ponds exceeding 500 PPM. If the TDS value exceeds 500 PPM, water drainage will be applied. For treatment of aquaponic, experts use manual control. The system is designed to solve it. The method used in this Final Project is the study of literature to find the basic theory in aquaponics and analyze the problems. The next thing to do is designing the system, starting from the design of automatic control systems to remote monitoring systems. Afterwards, testing tools is conducted to see whether the system is able to run well. Based on the test results, the system can run well; however, a number of deviations are found, including the RTC test showing a delay time for 00.02.10 of RTC compared to the national standard time and an error of 2.4% found on a calibrated TDS sensor testing. The success rate of sending monitoring data is 100% of Antares connectivity testing.
1 December 2020 in IOP Conference Series: Materials Science and Engineering
The amount of power output in a solar power system depends on the intensity of solar radiation. The earth’s movements however cause changes in the intensity of solar radiation received by solar panels on the daily. Therefore, the implementation of a controller that can track the position of the sun (solar tracker) is believed to increase the power output of solar panels. This research focuses on the design of a photovoltaic panel drive system using an Android-based application as a monitoring media. The application is used to monitor the current temperature and provide a desired angle input. Based on the test results, the average power output of a fixed PV reached only 17.15 Watt, while on a single axis PV, average output reached 21.50 Watt. It can be concluded that in the single axis PV, average power output increased by more than 25% compared to the fixed PV.
1 March 2020 in IOP Conference Series: Materials Science and Engineering
The on-grid solar power system is a solution that can fulfil the ever-increasing demands for electricity. The important role of a solar grid system is to save and reduce the cost of electricity, particularly those with high energy usage in the daytime. This research aims to design a configuration for placing a solar grid system in the housings for the city of Bandung, Indonesia. The research method used is to collect solar radiation data, tool specifications, and other data needed, and then proceed to optimise on these bases. On-grid solar power system design requires the software HOMER. HOMER is used to find the correct system configuration, payback period, and the best NPC technically. Based on the result of optimization, the system configuration can fill the needs of electricity by about 42%for daily consumption with a total NPC cost of around thirty eighty million one hundred thousand with four years payback period.
30 November 2019 in Jurnal Elektro dan Mesin Terapan
The electrical energy of solar power plants which integrated into the networks depends on the intensity of solar radiation. However, some solar power plant areas there are still present trees and buildings around it that can partially cover the surface area of ​​the solar panel (partial shading). This study aims to investigate the effects of solar radiation variability due to several partial shading conditions on the 1 Wp solar cell output power. Based on observations from 10:00 to 14:00, the open-circuit voltage and short circuit current in solar cells decreases with increasing intensity of partial shading. The greater the partial shading of the solar cell, the lower the power output will be. The half partial shading effect of the total solar cell area resulted in a power reduction of 88.2%. A quarter of shading causes a decrease in the output power of solar cells by 75.6% compared to the power output under normal conditions. In addition, the increase in the temperature of solar cells resulted in a significant decrease in the open-circuit voltage.