Characterizing the influencing factors of resuspended dust on paved roads according to the atmospheric environment and traffic conditions is important to provide a basis for road atmospheric pollution control measures suitable for various road environments in the future. This study attempts to identify factors in the concentration of resuspended dust according to the level of road dust loading and PM₁₀ emission characteristics according to atmospheric weather environment and traffic conditions using real-time vehicle-based resuspended PM₁₀ concentration measuring equipment. This study mainly focuses on the following main topics: (1) the increased level of resuspended dust according to vehicle speed and silt loading (sL) level; (2) difference between atmospheric pollution at adjacent monitoring station concentration and background concentration levels on roads due to atmospheric weather changes; (3) the correlation between traffic and weather factors with resuspended dust levels; (4) the evaluation of resuspended dust levels by road section. Based on the results, the necessity of research to more appropriately set the focus of analysis in order to characterize the resuspended dust according to changes in the traffic and weather environment in urban areas is presented.

Characterizing the influence factors of exhaust gas based on the suspended road dust on paved roads, according to the number of vehicles and their distance with regard to driving pattern, is important in order to provide a coefficient for driving patterns to find a model equation. This has been a limitation of previous studies, in which this was difficult to carry out in a large area reflecting various driving patterns because some sections were selected according to empirical measurement results, and only one vehicle measurement was used to find the level of road dust. This study measured the concentration of suspended road dust that could occur, depending on the vehicle’s driving patterns, on an experimental road in Yongin, South Korea, from May to July 2023. The study was conducted to determine the degree of the effect of exhaust gas, according to the concentration of suspended road dust generated, by determining the separation distance based on real-time measurements. This study attempted to determine the changes in suspended road dust based on driving patterns in urban areas and factor in the concentration of suspended road dust with regard to emission characteristics in terms of exhaust gas and particulate matter with a diameter of 10 microns or less (PM₁₀). This was in accordance with conditions evaluated using mobile laboratories, based on suspended-PM₁₀-concentration-measuring equipment. This study mainly focused on the following main topics: (1) increasing the level of suspended particulate matter at less than 10 m intervals produced by exhaust gas; (2) decreasing the level of suspended road dust with an increase in the number of vehicles, with the area measured at a distance of three cars in front showing the lowest level of suspended road dust in the air and a low level for the rear vehicle; (3) demonstrating that PM₁₀ is effective in measuring the generation of suspended road dust; and (4) evaluating suspended road dust levels by road section. Based on the results, this research is necessary to more appropriately set the focus of analyses that aim to characterize suspended road dust according to exhaust gas and PM₁₀ content in silt.

As the amount of aged pavement increases, functional damage, such as spalling, occurs frequently on Portland Cement Concrete pavement (PCC) in South Korea. However, the existing management method does not properly reflect the scope of deterioration of the pavement causing early damage. To overcome the problem of the existing repair method, this study evaluated the deterioration of functional damage on the surface of the slab as soundness through ultrasonic velocity measurement method among non-destructive testing (NDT) techniques and suggested a method to estimate the depth of deterioration. To develop a method for estimating the depth of the deterioration a slab, a preliminary investigation was conducted to check the range of ultrasonic velocity of concrete pavement in South Korea and to evaluate the variability of NDT equipment. Based on the ultrasonic velocity, the sound rating of concrete pavement was graded from 5 for “very good” to 0 for “very poor”, and the tendency of the ultrasonic velocity to increase according to the depth of the deteriorated areas was confirmed.

This study explores the correlation between road surface texture, including microtexture (texture depth) and macrotexture (wavelength) in asphalt pavement, and suspended dust generation on asphalt pavements. A detailed analysis of various pavement types, including Hot Mix Asphalt (HMA) and porous pavement, was conducted to assess their impact on dust load and concentration. For HMA pavements, deeper texture depths led to a higher dust load and concentration, attributed to the impermeable nature of the material, which causes dust to become easily suspended in the air. Conversely, porous pavements, which have air gaps in their surface layers, showed reduced dust suspension despite a higher dust load, due to the ability of these voids to trap dust and minimize air-pumping effects from tire–road contact. The study found that a macrotexture depth (MTD) exceeding 1.7 mm stabilized dust concentration, while higher surface wavelengths and silt load (sL) values above 0.1 g/m² significantly contributed to dust suspension. These findings suggest that optimizing road surface texture and aggregate size, considering the voids and depth, can help reduce suspended dust, providing a balance between road safety and environmental management. This research offers valuable insights for designing pavements that mitigate air pollution while maintaining functional performance.