A Li7P3S11 glass-ceramic solid electrolyte and a core–shell S@BP2000 nanocomposite are used to fabricate all-solidstate Li–S batteries, which exhibit outstanding cycle stability and rate capabilities.
27 February 2024 in Energy & Environmental Science
Sulfurized polyacrylonitrile (SPAN) is deemed as a prospective replacement cathode in high-energy-density lithium-sulfur batteries. Conventional carbonate electrolytes, most widely employed in Li-SPAN batteries, exhibit chemical in-compatibility with lithium (Li) metal anodes. In addition, for ether-based electrolytes, Li2Sn (n ≤ 4) is facile to generate during cycling, leading to shuttle effect and battery failure. Herein, a multi-system adaptable gel polymer electrolyte (named as PFGPE) is innovatively advanced by in-situ copolymerization of hexafluorobutyl acrylate and pentaerythritol tetraacrylate to address these issues. Given the feasibility of our strategy, C-O and LiF riched cathode electrolyte interphase (CEI) is constructed, uniform distribution of Li+ and reduced parasitic reactions are optimized by solid electrolyte interphase (SEI) with objective gradient distribution. Rapid transportation of Li+ and improved reaction kinetics are realized through polar groups in PFGPE, which also suppress the dissolution of lithium polysulfides and reduce the loss of active substances. Therefore, the excellent performances of Li-SPAN batteries in both carbonate ester and ether systems are first demonstrated. Specifically, for the first time, a high capacity of 725.1 mAh g−1 is delivered in SPAN/PFGPE/Li battery with ether-based electrolyte after 600 cycles at 0.2 C. Additionally, matched with carbonate ester electrolyte, an initial capacity of 1392.8 mAh g−1 is achieved, continuously operating for 200 cycles with minor capacity fade at 0.1C. Hence, this work provides a promising solution for high-performance Li-SPAN batteries with excellent versatility.
P2-Na 2/3 [Ni 0.3 Co 0.1 Mn 0.6 ]O 2 as a cathode of sodium-ion batteries delivers a comparable energy-density to that of the commercialized LiCoO 2 cathode in lithium-ion batteries.
Ni-rich layered oxide LiNi0.8Co0.15Al0.05O2 (NCA) is one of the most promising cathode candidates for high-energy-density lithium batteries. However, the extensive application of NCA is hindered due to the notorious electrode/electrolyte interfacial issues. To address the above bottleneck, a new gel polymer electrolyte is prepared with maleic anhydride/hexafluorobutyl methacrylate/methyl methacrylate at a ratio of 1 : 1 : 1 via in situ polymerization. A high electrochemical stability window of 5.5 V vs. Li+/Li and ionic conductivity of 1.1 × 10−3 S cm−2 are achieved, which suggest the superior high-voltage stability and fast ion migration dynamics of poly(maleic anhydride–hexafluorobutyl methacrylate–methyl methacrylate) (PMHM) electrolyte that are contributed by C–F and ester/acid anhydride groups in the polymer chain. As a result, the NCA/PMHM/Li battery delivers stable cycling performance with a capacity retention of 91.8% after 200 cycles at 0.5C, and a high capacity retention of 77.7% after 500 cycles at 1C. X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) results reveal the stability of interfacial chemistry and the integrity of cathode structure. This work indicates that the in situ polymerized hexafluorobutyl methacrylate-based electrolyte is imperative to address the interfacial issues and boost the development of high-energy lithium metal batteries with a Ni-rich cathode.
To reveal the influence of element distribution on the structure and electrochemical performances of Ni-rich layered cathode materials, LiNi0.68Co0.13Mn0.19O2 (NCM) with four types of Ni/Mn distributions (homogeneous, core–shell, multi-shell and concentration-gradient structures) is designed and synthesized with a combination of co-precipitation and high-temperature solid-state method. Ni/Mn distributions of the as-prepared NCM cathode materials are investigated with focused ion beam (FIB) and energy disperse X-ray spectrum (EDS) line scanning on the cross-section of single particles, which illustrate that NCM materials with the desired Ni/Mn distributions are successfully prepared. For the three spherical heterogeneous NCM materials, the center is the Ni-rich component while the surface is the Mn-rich component. Ni/Mn distributions between the center and surface components are in different forms. Studies imply that the heterogeneous samples exhibit smaller cation disordering, lower charge transfer resistance, higher Li+ diffusion coefficient and higher structural stability than the homogeneous one. Therefore, the heterogeneous samples, especially the multi-shell and concentration-gradient ones, display improved cycling and thermal stability compared to the homogeneous one. These results manifest that multi-shell and concentration-gradient structures are effective strategies to modify the layered NCM cathode materials for Li-ion batteries.