A highly transparent passivating contact (TPC) as front contact for crystalline silicon (c-Si) solar cells could in principle combine high conductivity, excellent surface passivation and high optical transparency. However, the simultaneous optimization of these features remains challenging. Here, we present a TPC consisting of a silicon-oxide tunnel layer followed by two layers of hydrogenated nanocrystalline silicon carbide (nc-SiC:H(n)) deposited at different temperatures and a sputtered indium tin oxide (ITO) layer (c-Si(n)/SiO2/nc-SiC:H(n)/ITO). While the wide band gap of nc-SiC:H(n) ensures high optical transparency, the double layer design enables good passivation and high conductivity translating into an improved short-circuit current density (40.87 mA cm−2), fill factor (80.9%) and efficiency of 23.99 ± 0.29% (certified). Additionally, this contact avoids the need for additional hydrogenation or high-temperature postdeposition annealing steps. We investigate the passivation mechanism and working principle of the TPC and provide a loss analysis based on numerical simulations outlining pathways towards conversion efficiencies of 26%.
1 August 2019 in Journal of Non-Crystalline Solids
A highly transparent front contact layer system for crystalline silicon (c-Si) solar cells is investigated and optimized. This contact system consists of a wet-chemically grown silicon tunnel oxide, a hydrogenated microcrystalline silicon carbide [ ${\rm{SiO}_{2}}$ /µc-SiC:H(n)] prepared by hot-wire chemical vapor deposition (HWCVD), and a sputter-deposited indium doped tin oxide. Because of the exclusive use of very high bandgap materials, this system is more transparent for the solar light than state of the art amorphous (a-Si:H) or polycrystalline silicon contacts. By investigating the electrical conductivity of the µc-SiC:H(n) and the influence of the hot-wire filament temperature on the contact properties, we find that the electrical conductivity of µc-SiC:H(n) can be increased by 12 orders of magnitude to a maximum of 0.9 S/cm due to an increased doping density and crystallite size. This optimization of the electrical conductivity leads to a strong decrease in contact resistivity. Applying this ${\rm{SiO}_{2}}$ /µc-SiC:H(n) transparent passivating front side contact to crystalline solar cells with an a-Si:H/c-Si heterojunction back contact we achieve a maximum power conversion efficiency of 21.6% and a short-circuit current density of 39.6 mA/cm2. All devices show superior quantum efficiency in the short wavelength region compared to the reference cells with a-Si:H/c-Si heterojunction front contacts. Furthermore, these transparent passivating contacts operate without any post processing treatments, e.g., forming gas annealing or high-temperature recrystallization.